Bedienungsanleitung NutriBullet PRO Plus (Seite 5 von 18) (Englisch)

796731

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

of your NutriBullet® or create safety hazards. When replacing blending

containers or an extractor blade or ordering additional accessories from

NutriLiving.com, or by contacting Customer Srevice, please specify the

model for parts that are compatible with your unit.

• Periodically inspect NutriBullet® components for damage or wear that may

impair proper function. Discontinue use and replace components if you detect

cracking, crazing or cloudiness or other damage to the plastic, tabs and the

Actuators or the Power Base. You may purchase new blending containers and

extractor blades at NutriLiving.com or by contacting Customer Service. WE

RECOMMEND REPLACING YOUR EXTRACTOR BLADE® EVERY 6 MONTHS

OR AS NEEDED FOR OPTIMAL PERFORMANCE.

NUTRIBULLET CLEANING

& USER MAINTENANCE INSTRUCTIONS

• Cleaning the NutriBullet® is so easy...simply place any of the pieces

(except for the Power Base and Extractor Blade) on the top shelf of the

dishwasher or hand wash with warm soapy water and rinse.

HERE’S HOW TO CLEAN THE NUTRIBULLET®:

• STEP 1: The most important thing — ALWAYS POWER OFF and UNPLUG

the Power Base from the power supply outlet when it is left unattended,

before assembling, disassembling, changing accessories or approaching

parts that move in use or when cleaning. Do not attempt to handle the

appliance until all parts have stopped moving!

• STEP 2: Make sure the Blending Container / Extractor Blade is not

attached to the Power Base.

• STEP 3: Cleaning the individual components (Power Base, Extractor

Blades, NutriBullet Blending Containers):

POWER BASE:

For the most part, the Power Base doesn’t really get dirty, but if you

neglect to twist the Extractor Blade on to the Blending Container tightly,

liquids can leak out and get into the base and stick to the activator buttons.

• NEVER Submerge the Power Base in water or put it in the dishwasher.

• Do not remove the rubber or plastic liners inside the Power Base.

• Use a sponge or dish cloth dampened with warm soapy water to wipe

down the inside well and outside of the Power Base until clean.

• Pay particular attention to the white actuator tabs on the inside of the

Power Base to loosen any sticky debris from drips and spills. If necessary

you may use a small brush to scrub the area to ensure it is kept clean.

EXTRACTOR BLADES:

• Do not wash the Extractor Blade in the dishwasher as elevated

temperatures will warp the plastic and damage the Gaskets.

• Rinse the Extractor Blades in warm water immediately after each use to

prevent debris from drying on the blades and gasket. Use a dish brush to

loosen any debris if you are not going to give it a complete wash at that time.

• When you are ready to thoroughly clean the Extractor Blades, HAND

WASH them in warm soapy water. Give it a quick scrub with a dish brush

to loosen any debris.

• DO NOT REMOVE THE GASKET as this may permanently damage

the Extractor Blade and cause leakage. If after washing as indicated

additional disinfecting is desired, you may rinse with a 10% vinegar/water

solution or with lemon juice. If, over time, the gasket becomes loose or

damaged, you may order new Extractor Blades at NutriLiving.com or

contact Customer Service for a replacement NutriBullet® Extractor Blade.

• Dry the Extractor Blades completely. It is helpful to turn the blade on its

side in your dish drainer to ensure BOTH SIDES of the Extractor Blade are

completely dried.

• We recommend replacing your NutriBullet® Extractor Blade every 6

months or as needed for optimal performance. To order a replacement

Extractor Blades, simply visit: NutriLiving.com.

NUTRIBULLET® BLENDING CONTAINERS (CUPS, LIDS AND LIP RINGS):

• These items are all TOP RACK dishwasher safe. We recommend rinsing

them and giving them a quick brush with a dish brush to remove any dried

debris before washing them in the dishwasher. NEVER use the sanitize

cycle to wash the Blending Containers as this may warp the plastic.

STUBBORN CLEAN UP

• If ingredients dry inside the NutriBullet® Cups, make your cleanup a snap

by ﬁlling the Blending Container about 2/3 full with room temperature

(21°C/70°F or less) water and screw on the Extractor Blade. Place the

Blending Container/Extractor Blade assembly on the NutriBullet® Power

Base for about 20-30 seconds. This will loosen the stuck ingredients, and

with a light scrub and rinse, you’ll be all done.

CLEAN FOLLOWING A LEAK:

• To clean the power base: POWER OFF and UNPLUG the Power Base, pick

it up and pour out any excess spillage into the sink. Then use a sponge

or dish cloth dampened with warm soapy water to wipe down the inside

well and outside of the Power Base until clean.

• Pay particular attention to the white actuator tabs on the inside of the

Power Base to loosen any sticky debris from drips and spills. If necessary

you may use a small brush to scrub the area to ensure it is kept clean.

IF YOU HAVE ANY COMMENTS, QUESTIONS OR

CONCERNS, PLEASE GO TO NUTRILIVING.COM

OR CALL CUSTOMER SERVICE AT: 1-800-523-5993.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NutriBullet PRO Plus Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info