Bedienungsanleitung Oase Biorb Tube (Seite 17 von 142) (Alle Sprachen)

693178

Zoom out

Zoom in

Vorherige Seite

1/142

Nächste Seite

- EN -

PRODUCT DESCRIPTION

• Check that the delivery scope is correct, complete

and undamaged.

 A

biOrb CLASSIC / FLOW / CUBE / LIFE / TUBE

Lighting unit with connection cable and ON/OFF

switch*

Cover insert

Bubble tube

Air hose with integrated non-return valve

Filter unit

Aerator pump with connection cable

Plug-in transformer

Bag with Water Conditioner and/or Biological Booster

Ceramic substrate**

biOrb aquarium operating manual

Lighting unit operating manual*

*Supply and version are product-specific.

**Quantity is product-specific.

WARNING

Danger of suffocation.

Keep plastic bags and small parts out of reach of babies

and young children.

Intended use

biOrb CLASSIC / FLOW / CUBE / LIFE / TUBE may only

be used as follows:

• As an aquarium.

The supplied components may only be used for the bi-

Orb products as specified in the following:

• The aerator pump: For aeration and supplying oxy-

gen to the aquarium.

• The lighting unit: For lighting the aquarium.

• The plug-in transformer: For connecting the aerator

pump and lighting unit to the mains.

• Operation under observance of the technical data.

The following restrictions apply to the aquarium and

its components:

• Only operate with water at a water temperature of

+4 °C to +35 °C.

Function description

Aquarium with LED lighting, filter unit and external

aerator pump for circulating the water.

INSTALLATION AND CONNECTION

Setting up the aquarium

How to proceed:

• Carefully unpack the acrylic aquarium.

• Do not expose to direct sunlight.

• For indoor use only.

• Do not move the aquarium when it is filled.

• Do not place on or near electrical devices.

• Do not place on or near heat sources.

• Operation under observance of the technical data.

Fitting the filter unit

How to proceed:

• Remove the packaging from the filter medium.

 B

1. Release the bubble tube from the filter housing by

a quarter turn counterclockwise (bayonet closure)

and lift out.

2. Place the bubble tube onto the filter cartridge and

fasten the bubble tube by a quarter turn counter-

clockwise.

3. Insert the bubble tube into the aquarium and fasten

it to the filter housing by a quarter turn clockwise.

Using the ceramic substrate

NOTE

Remove the packaging from the filter medium. Thor-

oughly rinse the ceramic substrate with warm tap wa-

ter before using for the first time to remove any soil-

ing.

NOTE

• Do not use aquarium gravel as it could clog the filter

cartridge.

• Only use the ceramic substrate provided.

• Do not tip the ceramic substrate into the aquarium

from a height as it could scratch the acrylic.

• Only use ceramic substrate particles that are at least

pea-sized. Remove and dispose of any particles that

are smaller.

How to proceed:

 C

• Wash and then place the supplied ceramic substrate

carefully into the aquarium and arrange it around

the filter housing.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oase Biorb Tube Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info