47405
25
Zoom out
Zoom in
Vorherige Seite
1/68
Nächste Seite
4-12
4. Selecting the Printer Settings
Item
1 Selecting the font
Selects the font that will be used for printing. This setting
is made by entering the ID of the desired font. To select a
font that is already installed in the printer, enter I###
(with the desired font ID entered in place of ###). To verify
font IDs, print out a Font List by following the procedure in
(18) Font List print out. It is possible to select a font other
than those already installed, such as those contained in
the optional Memory Card.
Optional font IDs such as S###, etc., start with different
letters according to the type of the font as shown below.
S: Software font (download)
M: Memory card font
H: Hardware font
H: RAM disk font
O: Optional ROM font
2 Sets the character size and character pitch
Selects the code set that will be used under each font.
3 Courier
Allows you to select between Regular and Dark (bold).
4 Letter Gothic
Allows you to select between Regular and Dark (bold).
5 Code set
Selects the code set that will be used under each font.
6 Font List print out
Available settings
Size : 4.00 ~ 999.75 points
Pitch : 0.44 ~ 99.99 cpi
Regular
Dark
Regular
Dark
The code sets that are available
for selection will differ depending
upon the font.
Remarks
The font can be set separately for
each interface. To select an installed
font, select Internal. To select a font
other than those already installed,
select Option and set the desired
font.
Either the character size or character
pitch is displayed according to the
font IDs.
Displayed only when the Internal is
selected.
Displayed only when the Internal is
selected.
4-4 Font selection/settings
About the font selection/settings
It is possible to perform font selection/settings for the 4 items shown in the following chart.
For the most efficient use of the printer functions, select the various settings according to your printing needs.
25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Oce OP1030 Operations Guide Printing System Functions wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info