Bedienungsanleitung Oce OP15 Operations Guide Printing System Set-up (Seite 8 von 22) (Englisch)

47519

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

1. Preparations

1-4 Name of parts (operation panel)

15 ppm copier - Inch specifications

15 ppm copier - Metric specifications

1 Printer key

Press this key when you want to switch to the printer mode.

2 Start [GO] key

Press this key when you want to restart printing, as well as when

you want to initiate the operation for form feed. This key is also

used to switch the printer on- and off-line. When the printer is on-

line, the Data On-line indicator will be lit.

3 Stop/Clear [CANCEL] key

Press this key when you want to stop printing, when you want to

cancel a setting midway through it, or when you want to clear an

error message.

4 Enter [Manual] key

Press this key when you want to register a setting.

5 M [Zoom (+)] key

Press this key when you want to scroll up among the various

functions, settings, etc.

6 N [Zoom (-)] key

Press this key when you want to scroll down among the various

functions, settings, etc.

7 Numeric keys

Press these keys when you want to enter a desired value directly.

8 Copy quality/magnification display

Indicates the status of the printer as well as other settings. “P00”

will be displayed when the machine is in the printer mode.

9 Memory Overflow / Data Error indicator

Flashes when a printing error has occurred. In this case, “Prt” and

“E##” will alternately flash as well in the copy quality/magnification

display. Press the Printer key and check the cause of the error.

For more detailed information, refer to “3-2 When an error code

or error messages appears…” on page 10.

● The copy quality/magnification display in the printer mode

To enter the printer mode, press the Printer key. The indications

that appear in the copy quality/magnification display when the

machine is in the printer mode are explained in the table below.

Indication

P00

P##

Prt

E##

Prt

Meaning

This is the initial display when the machine is in the

printer mode.

Indicates the menu number of printer-related settings.

The actual menu number of the selected setting will be

displayed in place of the ##. For more detailed

information, refer to the On-Line Manual.

“Prt” and “E##” will alternately flash when a printer error

occurs. (The corresponding error number will be

displayed in place of the ##.) For more detailed

information, refer to “3-2 When an error code or error

messages appears…” on page 10.

"Prt" and a 2-digit number will alternately flash to

indicate the current status of the printer. The meaning

of the flashing numbers is as follows:

01: The printer is in the middle of a self test. This will

appear when the main switch is turned ON ( | ) as

well as when the printer is reset.

02: The printer is in the process of changing settings.

Wait until it has completed the operation.

10: The printer is in the middle of processing data.

15: The printer is waiting for data.

20: A form feed time-out has occurred.

25: The printer is in the process of canceling data.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oce OP15 Operations Guide Printing System Set-up Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info