Bedienungsanleitung Oce OP30C Printing System Functions (Seite 72 von 90) (Englisch)

46807

Zoom out

Zoom in

Vorherige Seite

1/90

Nächste Seite

10-12

10. Windows KX Driver

Place a check in the checkboxes of functions you want to use.

Temporary ............. Data to be printed is stored on the hard disk of the printer. This can increase the speed of printing for those jobs which

involve multiple copy sets. If the area allocated for saving data becomes full when printing under the “Temporary”

setting, the data for the oldest print job will be deleted in order to make sufficient space.

Permanent ............. Data to be printed is stored on the hard disk of the printer. This can increase the speed of printing for those jobs which

involve multiple copy sets. The document data will be retained on the hard disk even if the area allocated for saving

data becomes full when printing under the “Permanent” setting. In this case, in order to save new data, use the optional

Barcode Reader or Utility Software to delete unneeded data and make space available.

* With the “Temporary” and “Permanent” settings, it is possible to use the optional Barcode Reader, or the Printer Disk

Manager and Job Manager Utility Software that are included on the enclosed CD-ROM, in order to add and delete

print jobs.

Virtual Mail Box

(VMB) .................... Data to be printed is stored in a virtual mailbox created on the printer's hard disk and can be printed out whenever

necessary using the operation panel. Up to 255 virtual mailboxes can be created. The document data will be retained

on the hard disk even if power to the printer is turned OFF, but it will be deleted once it is printed out.

Quick Copy ............ This mode allows you to use the operation panel to print out an additional number of copies for a specific print job

whenever necessary. The factory default setting for the number of print jobs that can be saved on the hard disk of the

printer is 32 (up to 50 possible under e-MPS settings). If the number of print jobs entered exceeds the available limit,

the next job will be written over the oldest data. The document data will be deleted if power to the printer is turned OFF.

Proof and Hold ......This mode prints out only a single copy set of a multiple-copy set print job so that you can check the content and

quality of the printout first. Then, if there are no problems, you can use the e-MPS “Quick Copy” setting on the printer

operation panel to print out the required number of copy set or delete the job, as desired. The document data will be

deleted if power to the printer is turned OFF.

Private Print ...........This mode allows you to save data for a print job without printing it out. Since input of a password is required in order to

print the corresponding data, confidentiality is maintained even with shared printers. The document data will be deleted

once it is printed out or if power to the printer is turned OFF.

Job Storage ........... This mode stores data for often used formats on the printer’s hard disk so that you can print out copies whenever

needed. Printing is accomplished from the operation panel on the printer after inputting a password. The document

data will be retained on the hard disk even if power to the printer is turned OFF.

If you selected “Private Print” or “Job Storage”, input a password in the “Access

Code” field. This password can be any 4-digit number from 0000 to 9999. You will

need to input this password from the printer operation panel in order to print out.

Even if you selected “Job Storage” however, there are times when it may not be

absolutely necessary to enter the password.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oce OP30C Printing System Functions Seite 72

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info