Bedienungsanleitung Oceanic Atom 3.0 (Seite 11 von 56) (Englisch)

550349

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

ATOM 3.0 OPERATING MANUAL

SHOW DUAL TIME

This selection allows Dual Time, which is set by an hour differential, to be added, or removed from, to the Watch Main screen.

Dual Time Lead-in, information includes (Fig. 10):

> Graphics Goto, SHOW, and DUAL.

• S (< 2 sec) - to access Show Dual Time.

• A (< 2 sec) - to step forward to CDT Lead-in.

• M (< 2 sec) - to step back to Watch ALT.

Show Dual Time, information includes (Fig. 11):

> Graphic YES (or NO) ﬂashing, or 2 dashes ( - - ) if no differential is set.

> Graphics SHOW and DUAL with icon.

• A or M (< 2 sec) - to toggle between YES and NO.

• S (< 2 sec) - to save the setting and revert to Lead-in.

• S (2 sec) - to step back to Lead-in, if no setting change.

WATCH CDT (Countdown Timer)

This selection provides access to a CDT for use in Watch mode.

Upon accessing a dive computer mode, Watch CDT operation will be terminated and the time reset to the previous setting.

CDT Lead-in, information includes (Fig. 12):

> Graphics Goto and CDT.

• S (< 2 sec) - to access CDT Status.

• A (< 2 sec) - to step forward to Chrono Lead-in.

• M (< 2 sec) - to step back to Dual Time Lead-in.

CDT Status, information includes (Fig. 13):

> Graphic OFF (or ON) ﬂashing. If OFF, 0:00 or the CDT if previously set. If ON, the remaining CDT (hr:min).

> Graphic CDT.

• A (< 2 sec) - to step forward through selections of OFF, ON, and SET.

• M (< 2 sec) - to step back through selections.

• S (< 2 sec) - to save the selection.

>> If OFF or ON is selected, revert to the Lead-in screen.

>> If SET is selected, access the Set CDT screen.

• S (2 sec) - to revert to CDT Lead-in, if no setting change.

Set CDT, information includes (Fig. 14):

> Graphics SEt and CDT.

> Timer setting (hr:min), with Hour digits ﬂashing.

• A (hold) - to scroll upward through Hour Set Points (8/sec) from 0: to 23: in increments of 1: (hr).

• A (< 2 sec) - to step upward through Hour Set Points.

• M (< 2 sec) - to step back through Set Points.

• S (< 2 sec) - to save the Hour setting and ﬂash the Minute digits.

• A (hold) - to scroll upward through Minute Set Points (8/sec) from :00 to :59 in increments of :01 (min).

• A (< 2 sec) - to step upward through Minute Set Points.

• M (< 2 sec) - to step back through Set Points one at a time.

• S (< 2 sec) - to save the CDT setting and revert to the CDT Status screen with the graphic SEt ﬂashing (Fig. 15).

> ON will then start the countdown and revert to CDT Lead-in.

> OFF will save the setting and revert to CDT Lead-in.

The CDT will run in the background until it counts down to 0:00, or it is set OFF, or DC Mode is accessed or a Dive is started in

which case the countdown will terminate and revert to OFF.

When a set CDT reaches 0:00, the Audible will sound during which time the graphic CDT will ﬂash on the Watch Main.

Fig. 11 - SHOW DUAL TIME

(to add to Main)

Fig. 12 - CDT LEAD - IN

(to access CDT Status)

Fig. 13 - CDT STATUS

Fig. 14 - SET CDT

(after access from Status)

Fig. 15 - CDT STATUS

(after being set)

Fig. 10 - DUAL TIME LEAD - IN

(to access Show)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oceanic Atom 3.0 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oceanic Atom 3.0

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info