Bedienungsanleitung Oceanic BUD (Seite 6 von 24) (Englisch)

550354

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

BUD OPERATING MANUAL

CONTROL BUTTON (B)

The Control Button (B) allows you to select display options and access speciﬁc information when you want to see it.

BAR GRAPHS

TLBG (Tissue Loading Bar Graph)

The TLBG (Fig. 1a) represents tissue loading of nitrogen, showing your relative no decompression or decompression status. As

your depth and elapsed dive time increase, segments will add to the TLBG, and as you ascend to shallower depths, the segments

will begin to recede, indicating that additional no decompression time is allowed for multilevel diving.

The TLBG monitors 12 different nitrogen compartments simultaneously and displays the one that is in control of your dive.

It is divided into a No Decompression zone (up to 3 segments displayed), a Caution zone (4 segments displayed, also No Deco),

and a Decompression zone (all 5 segments displayed).

While you cannot provide a guarantee against the occurrence of decompression sickness, you may choose your own personal

zone of caution based upon age, physique, excessive weight, etc., to reduce the statistical risk.

VARI (Variable Ascent Rate Indicator)

The VARI (Fig. 2a) provides a visual representation of ascent speed (i.e., an ascent speedometer).

The segments of the VARI represent two sets of speeds which change at a reference depth of 60 FT (18 M). Refer to the chart for

segment values.

WARNING: At depths greater than 60 FT (18 M), ascent rates should not exceed 60 FPM (18 MPM). At depths of

60 FT (18 M) and shallower, ascent rates should not exceed 30 FPM (9 MPM).

When Ascent is too fast, (i.e., greater than 60/30 FPM, or 18/9 MPM), all segments will ﬂash and the graphic SLOW will be

displayed (Fig. 3) until ascent is slowed.

ALPHA / NUMERIC DISPLAYS

It is imperative that you understand the formats, ranges, and values of the information represented to avoid any possible misun-

derstanding that could result in error.

Current Depth is displayed on the Main Dive screens (Fig. 4a).

While at a No Deco Safety or a Deco Stop, the required Stop Depth is displayed on the Main (Fig. 5a).

Max Depth is displayed on Alternate Dive screens (Fig. 6a).

Times are shown in various formats.

• Hour:Minute - Dive Time Remaining (Fig. 4b), Elapsed Dive Time (Fig. 6b), Surface Interval, Fly, Sat.

• Minute:Second - Safety Stop Time (Fig. 5b).

Altitude is displayed as a range from L2 to L7 on the Surface Main when at elevations above 3,000 feet. It is not displayed at

Sea level, which extends up to 3,000 feet elevation. Refer to the table on page ??.

POWER SUPPLY

The BUD utilizes (1) type CR 2430 Lithium 3 volt cell. Expected use life is approximately 100 hours if (1) 1 hour dive per day is

conducted each time the unit is activated, up to 300 hours if (3) 1 hour dives per day are conducted.

Low Battery

Voltage level is checked upon activation and every minute during operation on the surface.

• When voltage decreases to the warning level (2.75 volts), the icon is displayed solid on the Surface Main (Fig. 7a).

• Upon decreasing to a voltage level that will no longer sustain proper operation (2.50 volts), the icon will ﬂash 5 times and

the unit will shut off.

• If a low battery condition exists when the unit is activated (by pressing the button), the graphic bAT and the icon will appear

ﬂashing for 5 seconds and the unit will shut off.

• If the button is not pressed to activate the unit prior to a dive, and a low battery condition exists, the icon will appear ﬂashing

as a warning upon descent to 5 FT (1.5 M) and no other information will be displayed.

• If a low battery condition occurs during a dive, there will be sufﬁcient battery power to maintain operation for the remainder

of that dive. Upon entry into Surface Mode, the Battery icon will appear (shell only with no inner bar) with the graphics CHG

BAT ﬂashing (Fig. 8).

Fig. 1 - TLBG

Fig. 2 - VARI

Fig. 3 - ASCENT ALARM

Deeper than 60 FT (18 M)

VARI Ascent Rate

Segments FPM MPM

0 0 - 20 0 - 6

1 21 - 30 6.1 - 9

2 31 - 40 9.1 - 12

3 41 - 50 12.1 - 15

4 51 - 60 15.1 - 18

5 60 + 18 +

60 FT (18 M) & Shallower

VARI Ascent Rate

Segments FPM MPM

0 0 - 10 0 - 3

1 11 - 15 3.1 - 4.5

2 16 - 20 4.6 - 6

3 21 - 25 6.1 - 7.5

4 26 - 30 7.6 - 9

5 30 + 9 +

Fig. 5 - STOP DEPTH

Fig. 4 - CURRENT DEPTH

Fig. 6 - MAX DEPTH

Fig. 7 - LOW BATTERY

WARNING

Fig. 8 - LOW BATTERY

(occurred during dive)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oceanic BUD Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oceanic BUD

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info