Bedienungsanleitung Oceanic OC1 (Seite 13 von 68) (Englisch)

551838

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

OC1 OPERATING MANUAL

Set CDT, information includes (Fig. 13):

> Graphics SEt and CD TMR

> CDT (hr:min) with Hour digits ﬂashing

> Time (clock) icon

• A (hold) to scroll upward through Hour Set Points at a rate of 8 per second from 0: to 23: in increments of 1: (hr).

• A (< 2 sec) to step upward through Set Points one at a time.

• M (< 2 sec) to step back through Set Points one at a time.

• S (< 2 sec) to save the Hour Set Point and ﬂash the Minute digits.

• A (hold) to scroll upward through Minute Set Points at a rate of 8 per second from :00 to :59 in increments of :01 (min).

• A (< 2 sec) to step upward through Set Points one at a time

• M (< 2 sec) to step back through Set Points one at a time.

• S (< 2 sec) to save the CDT Set Point and revert to the CDT Status screen with SET ﬂashing (similar to Fig. 12).

The CDT will run in the background, while in Watch mode, until it counts down to 0:00, or it is set OFF, or DC Mode is accessed

or a Dive is started in which case the CD will terminate and revert to OFF.

When a set Countdown Time reaches 0:00, the Audible Alarm will sound during which time the graphic CDT will be displayed

on the watch Default Time screen with 0:00 ﬂashing (Fig. 14).

FREE Dive Mode has a separate (min:sec) CDT.

CHRONOGRAPH (Stop Watch/Lap Timer)

Upon access from the Menu, the Status screen is displayed

> OFF solid and 0:00, if no time was previously set

> ON and the remaining Countdown Time (hr:min), if running

> OFF ﬂashing and the time previously set, if it has ended

Chrono Status, information includes (Fig. 15):

> Graphic CHRONO

> Elapsed time if running, or 0:00:00.00 (hr:min:sec .01 sec)

> Time (clock) icon

• S (< 2 sec) to start Timer counting up from 0:00:00.00 to 9:59:59.99 max (hr:min:sec .01 sec) in increments of .01

(1/100th sec). After ﬁrst 4.99 seconds, the .01 digits display 2 dashes (. - - ).

• S (< 2 sec) to freeze and display Laps (up to 9), the Timer continues to run in the background

• A (< 2 sec) to stop Timer and recall Lap 1 (Fig. 16), repeat to recall other Laps

• A (2 sec) to reset Timer to 0:00:00.00 and revert to the Chrono Status screen

While the Chronograph is running, it remains on the screen until another screen is accessed, it will then continue to run in the

background while on the surface. Upon descending on a dive, Chrono operation will be terminated and reset to 0:00:00.00.

DAILY ALARM

When set On, the Daily Alarm will -

> be synchronized with the Watch Default Time selected.

> sound the Audible at the Time set every day.

> not sound the Audible while operating in DC Modes.

> run in the background until set Off.

Daily Alarm Status

Upon access, the following is displayed (Fig. 17) -

> Graphics DAILY AL solid with OFF (or ON) ﬂashing.

> Alarm Time (hr:min) set with graphic A (or P) if 12 Hour Format, and Time (clock) and Alarm (speaker) icons.

• A < 2 sec to step through selections OFF, ON, and SET.

• S < 2 sec to save the selection that is ﬂashing.

>> If OFF is selected, operation reverts to the Menu.

>> If ON is selected, operation reverts to the Menu with the Alarm enabled.

>> If SET is selected (Fig. 18), Set Daily Alarm is accessed.

Set Daily Alarm, information includes (Fig. 19):

> Graphics SEt and DAILY AL

> Alarm Time (hr:min) with Hour digits ﬂashing

> Time (clock) and Alarm (speaker) icons

• A (hold) to scroll upward through Hour Set Points at a rate of 8 per second from 0: to 23: in increments of 1: (hr).

• A (< 2 sec) to step upward through Set Points one at a time.

• M (< 2 sec) to step back through Set Points one at a time.

• S (< 2 sec) to save the Hour Set Point and ﬂash the Minute digits.

• A (hold) to scroll upward through Minute Set Points at a rate of 8 per second from :00 to :59 in increments of :01 (min).

• A (< 2 sec) to step upward through Set Points one at a time

• M (< 2 sec) to step back through Set Points one at a time.

• S (< 2 sec) to save the Set Point and revert to the Daily Alarm Status screen with SET ﬂashing (similar to Fig. 18).

Fig. 13 - SET CDT

Fig. 14 - WATCH MAIN

(during CDT Alarm)

Fig. 15 - CHRONO

(started, running)

Fig. 16 - CHRONO

(started, frozen or recalled)

Fig. 17 - DAILY ALARM

STATUS (upon access)

Fig. 19 - SET ALARM TIME

Fig. 18 - DAILY AL STATUS

(to access Set or set/ready)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oceanic OC1 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oceanic OC1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info