Bedienungsanleitung Oceanic OC1 (Seite 48 von 68) (Englisch)

551838

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

OC1 OPERATING MANUAL

FREE MENU

M (< 2 sec) - to access Menu, while viewing Surface Main.

A (< 2 sec) - to step down (forward) through selections.

M (< 2 sec) - to step up (backward) through selections.

S (< 2 sec) - to access selection indicated by Arrow icon ( > ).

M (2 sec) any time - to revert to Surface Main.

2 min (no button action) - will revert to Surface Main.

CDT (Countdown Timer) STATUS

Upon access, the following is displayed (Fig. 127A) -

> Graphics CD TMR solid with OFF (or ON) ﬂashing.

> Countdown Time (hr:min). If OFF, 0:00 or the CDT time if previously set. If ON, the remaining time (min:sec).

• A < 2 sec to step through selections OFF, ON, and SET.

• S < 2 sec to save the selection that is ﬂashing.

>> If OFF is selected, operation reverts to the Menu.

>> If ON is selected, operation reverts to the Menu with the time set starting to countdown.

>> If SET is selected (Fig. 127B), Set CDT is accessed.

Set CDT, information includes (Fig. 128):

> Graphics SEt and CD TMR

> CDT (min:sec) with Minutes digits ﬂashing

> Time (clock) icon

• A (hold) to scroll upward through Minute Set Points at a rate of 8 per second from 0: to 59: in increments of 1: (min).

• A (< 2 sec) to step upward through Set Points one at a time.

• M (< 2 sec) to step back through Set Points one at a time.

• S (< 2 sec) to save the Minute Set Point and ﬂash the Seconds digits.

• A (hold) to scroll upward through Seconds Set Points at a rate of 8 per second from :00 to :59 in increments of :01 (sec).

• A (< 2 sec) to step upward through Set Points one at a time

• M (< 2 sec) to step back through Set Points one at a time.

• S (< 2 sec) to save the CDT Set Point and revert to the CDT Status screen with SET ﬂashing (similar to Fig. 127B).

The CDT will run in the background, while on the surface and during dives, until it counts down to 0:00, or it is turned OFF.

When a set Countdown Time reaches 0:00, the Audible Alarm will sound during which time the graphic CDT will be displayed

with 0:00 ﬂashing on the Surface or Dive Main (Fig. 129).

EDT ALARM

Factory set for a ﬁxed 30 seconds, the EDT (Elapsed Dive Time) alarm sounds the Audible every 30 seconds while underwater in

FREE Dive Mode.

Set EDT Alarm, information includes (Fig. 130):

> Graphic EDT

> Graphic OFF (or ON) ﬂashing

• A < 2 sec to toggle OFF/ON

• S (< 2 sec) to save Set Point and revert to FREE Menu.

DD ALARMS

There are 3 Descending Depth (DD) alarms that can be set at progressively deeper depths. DD2 values deeper than DD1, DD3

values deeper than DD2.

Set DD1 Alarm, information includes (Fig. 131):

> Depth value with MAX and FT (or M) icons

> Graphics DD1 AL

> Graphic OFF (or ON) ﬂashing

• A < 2 sec to toggle OFF/ON

• S (< 2 sec) to save Set Point and ﬂash Depth digits (if ON); or revert to FREE Menu (if OFF), bypassing DD2 and DD3.

• A (hold) to scroll upward through Depth values at a rate of 8 per second from 30 to 330 FT (10 to 100 M) in increments of

10 FT (1 M)

• A (< 2 sec) to step upward through Set Points one at a time

• M (< 2 sec) to step back through Set Points one at a time

• S (< 2 sec) to save the setting and revert to the FREE Menu.

Fig. 127B - CDT STATUS

(to access Set, or set/ready)

Fig. 127A - CDT STATUS

(upon access)

Fig. 128 - SET CDT

(min:sec)

Fig. 129 - SURFACE MAIN

(during CDT alarm)

Fig. 130 - SET FREE EDT AL

Fig. 131 - SET FREE DD1 AL

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oceanic OC1 Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oceanic OC1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info