Bedienungsanleitung Oceanic OC1 (Seite 65 von 68) (Englisch)

551838

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

OC1 OPERATING MANUAL

SPECIFICATIONS (CONTINUED)

NUMERIC DISPLAYS: Range: Resolution:

• Watch Time of Day 0:00:00 to 23:59:59 hr:min.sec 1 second

• Watch Alternate Time 0:00:00 to 23:59:59 hr:min.sec 1 second

• Watch Time Differential - 23 hr to 0 to + 23 hr 1 hour

• Watch Countdown Timer 23:59 to 0:00 hr:min 1 minute

• Watch Chrono Lap # 1 to 9 1 (Lap)

• Watch Chrono Lap Time 0:00:00.00 to 99:59:59.99 .01 second

hr:min:sec_ .01 sec

• PC Countdown Timer 1:59 to 0:00 min:sec 1 second

• Altitude Level Sea, EL 1 to EL 7 1 (level)

• Time to Fly 23:50 to 0:00 hr:min 1 minute

(starting 10 min after the dive)

• Time to Desat 23:50 to 0:00 hr:min 1 minute

(starting 10 min after the dive)

• Temperature 0 to 140°F (-9 to 60°C) 1°F (C)

• Tank Pressure 0 to 5000 PSI (345 BAR) 5 PSI (1 BAR)

• NORM Max Operating Depth 330 FT (100 M)

• GAUG Max Operating Depth 660 FT (200 M)

• NORM/GAUG SI Time 0:00 to 23:59 hr:min 1 minute

• NORM/GAUG Dive Number 0 to 24 1

• NORM Depth (display) 0 to 330 FT (100 M) 1 FT (0.1/1 M )

• GAUG Depth (display) 0 to 660 FT (200 M) 1 FT (0.1/1 M )

• NORM/GAUG EDT 0:00 to 9:59 hr:min 1 minute

• NORM DTR (NDC, OTR) 0:00 to 9:59 hr:min 1 minute

• NORM/GAUG ATR 0:00 to 9:59 hr:min 1 minute

• FO2 (1) Set Point Air, 21 to 50 % 1 %

• FO2 (2, 3) Set Points Air, 21 to 100 % 1 %

• PO2 Value 0.00 to 5.00 ATA .01 ATA

• No Deco Deep Stop Time 2:00 to 0:00 min:sec 1 second

• No Deco Safety Stop Time 5:00 to 0:00 min:sec 1 second

• Deco Stop Time 0:00 to 9:59 hr:min 1 minute

• Total Ascent Time 0:00 to 9:59 hr:min 1 minute

• Violation Countdown Timer 23:50 to 0:00 hr:min 1 minute

• FREE SI Time 0:00 to 59:59 min:sec 1 second

1:00 to 23:59 hr:min 1 minute

• FREE Dive Number 0 to 99 1

• FREE Countdown Timer 59:59 to 0:00 min:sec 1 second

• FREE EDT 0:00 to 59:59 min:sec 1 second

WARNING: If your OC1 stops working for any reason while operating as a Dive Computer, it is important that

you have anticipated this possibility and are prepared for it. This is an important reason for not pushing the no

decompression and oxygen exposure limits, and a critical reason to avoid entering decompression.

If you dive in situations where your trip would be ruined or your safety would be jeopardized by losing the use of

your OC1, a backup instrument system is highly recommended.

FCC ID: MH8A

FCC COMPLIANCE:

This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.) this equipment may not cause harmful interference, and 2.) this equipment must accept any interference received,

including interference that may cause undesired operation.

FCC INTERFERENCE STATEMENT:

This equipment has been tested and found to comply with the limits for an Intentional Radiator, a Class B Digital Device, pursuant to Part 15 of FCC Rules, Title 47 of the Code of Federal Regulations. These rules are designed to

provide reasonable protection against harmful interference in a commercial or residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

There is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician.

Warning: Changes or modiﬁcations to this unit not expressly approved by Oceanic/2002 Design could void the user's authority to operate the equipment.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oceanic OC1 Seite 65

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oceanic OC1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info