Bedienungsanleitung Oceanic OCS (Seite 22 von 62) (Englisch)

551851

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

OCS OPERATING MANUAL

• A (hold) - to scroll upward through Set Points at a rate of 8 per sec from 0:10 to 3:00 (hr:min) in increments of 0:05 (:min).

• A (< 2 sec) - to step upward through Set Points one at a time.

• M (< 2 sec) - to step back through Set Points one at a time.

• S (< 2 sec) - to save the setting and revert to the Set A Menu.

FREE Mode has a separate EDT Alarm.

Set TLBG Alarm, information includes (Fig. 43, page 21):

> Graphic TLBG AL.

> Depth value ﬂashing with MAX and FT (or M) icons.

• A (< 2 sec) - to step upward through Set Points from 1 to 4 segments one at a time.

• M (< 2 sec) - to step back through Set Points one at a time.

• S (< 2 sec) - to save the setting and revert to the Set A Menu.

FREE Mode has a separate TLBG Alarm.

Set DTR Alarm, information includes (Fig. 44, page 21):

> Graphic DTR AL.

> Dive Time Remaining value (hr:min) ﬂashing with Time (clock) icon.

• A (hold) to scroll upward through Set Points at a rate of 8 per sec from 0:00 to 0:20 (hr:min) in increments of 0:01 (:min).

• A (< 2 sec) - to step upward through Set Points one at a time.

• M (< 2 sec) - to step back through Set Points one at a time.

• S (< 2 sec) - to save the setting and revert to the Set A Menu.

SET U (UTILITIES) MENU

• S (< 2 sec) - to access Set U Menu while the selection Arrow icon ( > ) is next to Set U on the NORM (or GAUG) Menu.

• A (< 2 sec) - to step down (forward) through selections.

• M (< 2 sec) - to step up (back) through selections.

• S (< 2 sec) - to access selection indicated by Arrow icon ( > ).

Selections for Wet Activation, Units, Algorithm, Conservative Factor, and Glo Duration also apply to FREE Dive Mode.

> To change any of these items while in FREE mode, use the Set U selection in the NORM Menu.

Set Wet Activation, information includes (Fig. 45):

> Graphic WET ACTIV.

> Set Point graphics ON and OFF, Arrow ( > ) icon next to the one previously saved ﬂashing.

• A (< 2 sec) - to toggle Set Points.

• S (< 2 sec) - to save the setting and revert to the Set U Menu.

Set Units, information includes (Fig. 46):

> Graphic UNITS.

> Set Point graphics IMPERIAL and METRIC, Arrow ( > ) icon next to the one previously saved ﬂashing.

• A (< 2 sec) - to toggle Set Points.

• S (< 2 sec) - to save the setting and revert to the Set U Menu.

Set Deep Stop, information includes (Fig. 47):

> Graphic DEEP STOP.

> Set Point graphics ON and OFF, Arrow ( > ) icon next to the one previously saved ﬂashing.

• A (< 2 sec) - to toggle Set Points.

• S (< 2 sec) - to save the setting and revert to the Set U Menu.

Deep Stop applies only to NORM No Deco dives.

Set Safety Stop, information includes (Fig. 48A):

> Graphics SS (= Safety Stop).

> Set Point graphics OFF, ON, TMR ON; Arrow ( > ) icon next to ON or OFF, the one previously saved, ﬂashing.

• A (< 2 sec) - to step forward through Set Points one at a time.

• M (< 2 sec) - to step back through Set Points one at a time.

• S (< 2 sec) - to save the setting.

If OFF or TMR ON is selected/saved, operation will revert to the Set U Menu.

If ON is selected/saved, the Set Stop Time/Depth screen is displayed with the Time digits ﬂashing (Fig. 48B).

• A or M (< 2 sec) - to toggle between 3:00 and 5:00 (min:sec).

• S (< 2 sec) - to save the Time setting and ﬂash the Depth digits.

• A (< 2 sec) to step forward through Depth Set Points of 10, 15, 20 FT (or 3, 4, 5, 6 M).

• M (< 2 sec) to step back through Set Points one at a time.

• S (< 2 sec) to save the SS Time/Depth setting and revert to the Set U Menu.

Safety Stop applies only to NORM No Deco dives.

Set Algorithm, information includes (Fig. 49):

> Graphic ALGORITHM.

> Set Point graphics Z+ and DSAT, Arrow ( > ) icon next to the one previously saved ﬂashing.























** NORM only

Fig. 45 - SET WET ACTIV

Fig. 46 - SET UNITS

Fig. 47 - SET DEEP STOP

Fig. 48B - SET SAFETY STOP

(TIME & DEPTH)

Fig. 48A - SET SAFETY STOP

(TIMER)

Fig. 49 - SET ALGORITHM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oceanic OCS Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oceanic OCS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info