Bedienungsanleitung Oceanic OCS (Seite 31 von 62) (Englisch)

551851

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

OCS OPERATING MANUAL

Fig. 81 - DECO STOP ALT 2

Fig. 80 - DECO STOP ALT 1

DECO STOP MAIN, information includes (Fig. 79) -

> Full Stop icon (Stop Bar with both Arrows) solid.

> Current Depth with FT (or M) icon.

> Stop Depth with graphic FT (or M) and remaining Stop Time (hr:min).

> Graphics DECO STOP and GAS1 (or 2 or 3), one in use.

> Nx icon, if any Gas is Nitrox.

> Full TLBG with NI icon.

• A (< 2 sec) - to access ALTs.

• M (< 2 sec) - to access Gas Switching.

• S (< 2 sec) - to acknowledge alarms.

• S (2 sec) - to access Compass.

• L (press) - to activate Backlight.

Deco Stop Alt 1, information includes (Fig. 80) -

> Max Depth with FT (or M) and MAX icons.

> Graphic TAT with Total Ascent Time** (hr:min).

> Elapsed Dive Time (hr:min) with graphic EDT.

> FO2 Set Point for Gas in use with graphic FO2.

> Current PO2 value (ATA) with graphic, if Nitrox.

> Nx icon, if Nitrox.

> O2BG with O2 icon, if Nitrox.

**TAT includes Stop Times at all required Deco Stops plus vertical Ascent Time based on the max rate allowed.

• A (< 2 sec) - to access ALT 2.

• Revert to Main in 5 sec, if A not pressed.

Deco Stop Alt 2, information includes (Fig. 81) -

> Time of Day (hr:min sec), with A (or P) if 12 Hour.

> Temperature with ° icon and graphic F (or C).

• 5 sec or A (< 2 sec), revert to Main.

CONDITIONAL VIOLATION (CV)

Upon ascent above the required Deco Stop Depth, operation will enter CV during which no off gassing credit will be given; with

remaining Deco Stop Time and TAT freezing.

The Audible will sound and the LED will ﬂash. The full TLBG and Down Arrow icon will ﬂash (Fig. 82) until the Audible is si-

lenced, then the TLBG will be solid.

• S (< 2 sec) - to silence Audible.

> The graphic ABOVE STOP will be displayed and the Down Arrow icon will ﬂash until descent is made to below the

required Stop Depth (within Stop Zone), then full the Stop icon (Stop Bar with both Arrows) will be on solid.

• L (press) - to activate the Backlight.

If descent below the required Deco Stop Depth is made within 5 minutes, operation will resume in Deco with off gassing credit

given (Stop Time and TAT decrease).

DELAYED VIOLATION 1 (DV1)

Once above the Deco Stop Depth for more than 5 minutes, operation will enter DV1 which is a continuation of CV**.

Again, the Audible will sound and the LED will ﬂash. And, the full TLBG will ﬂash (Fig. 83) until the Audible is silenced.

> Down Arrow icon continues to ﬂash until descent to below required Stop Depth (within Stop Zone), then full Stop icon

(Stop Bar with both Arrows) will be on solid.

• L (press) - to activate the Backlight

When descent below the required Deco Stop Depth is made, operation will resume in Deco with off gassing credit given (Stop

Time and TAT decrease).

**The difference between CV and DV1 is that DV1 causes operation to enter Violation Gauge Mode 5 minutes after surfacing

from that dive.

Fig.82 - CV MAIN

(after Audible)

Fig. 83 - DV1 MAIN

(during Audible)

CV & DV1 ALTs

are similar to Deco.

Fig. 79 - DECO STOP MAIN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oceanic OCS Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oceanic OCS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info