Bedienungsanleitung Oceanic OCS (Seite 50 von 62) (Englisch)

551851

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

OCS OPERATING MANUAL

OVERVIEW

> S (2 sec) - to access Compass OP Main from Watch, Surface, or Dive Main.

> S (2 sec) or no button action (2 min*) - to revert to Watch, Surface, or Dive Main.

*During the ﬁnal 15 seconds, the remaining On time is displayed. If a button is pressed during that time, the 2 minute On time will reset

allowing operation to remain in Compass Mode.

> Compass OP Mode selected (North, Reference) - remains until changed.

> Reference OP Mode - can set a course, then also select a Reverse course while on the surface and during dives.

> Numeric values are displayed as 3 digits (000 to 360°), have a resolution of 001°, and an accuracy of +/- 005°.

> Operation will be normal and display of values will be within speciﬁed tolerances up to 90° tilt at which time the Heading

(diver's direction) digits are removed until the tilt angle is within tolerance.

Upon accessing the Compass, the OP (operating) Main of the last mode selected will be displayed >> North (Fig. 144), Refer-

ence (Fig. 145), or Reverse Reference (Fig. 146).

While on the surface, press M (< 2 sec) to access the Compass Menu to change the OP Mode, Calibrate, or set Declination.

COMPASS MENU, information includes (Fig. 147) -

> Graphics SEL (select) and MENU, with selections ->

> NORTH MODE - select as OP Mode with no set heading.

> REF MODE - select as OP Mode with set heading allowed.

> CALIBRATE - access to initiate Calibration.

> SET DECLIN - access to set Declination.

> Compass On time remaining, counting down from 15 to 0 (sec), blank when > 15 seconds.

• A (< 2 sec) - to step forward (down) through selections.

• M (< 2 sec) - to step back (up) through selections

• S (< 2 sec) - to select or access item indicated by ( > ) icon.

If NORTH or REF MODE is selected, that mode will be saved and its OP Main will be displayed.

• M or S (2 sec) any time, except while in Calibration - to revert to Compass OP Main.

• No button action (2 min) - revert to Watch, Surface, or Dive Main.

NORTH OP MAIN, information includes (Fig. 148) -

> Current Depth with FT (or M) icon, during dive mode, 00 during ﬁrst 10 min on surface, blank on surface > 10 min.

> North Mode icon (letter N in box).

> Static Arrow icon (at 12 o'clock), diver direction of travel.

> Dynamic Arrow, relative direction of magnetic North.

> Tilt icon*, when the Compass is at an angle => 20° off level.

> Numeric heading (diver's current direction), 001 to 360°, with position graphic (N, E, SE, etc.). *

Blank when the Tilt icon

is displayed

> On time remaining, counting down, if 15 to 0 (sec).

• S (2 sec) or no button action during 2 min - to revert to Watch, Surface, or Dive Main.

• L (press) - to activate Backlight.

• M (< 2 sec) - to access Compass Menu, surface only.

REFERENCE OP MAIN, information includes (Fig. 149) -

> Current Depth with FT (or M) icon, during dive mode, 00 during ﬁrst 10 min on surface, blank on surface > 10 min.

> Reference Mode icon (2 bars with arrow, Fig. 149a) with numeric Reference heading (course) set above it.

> Static Arrow icon (at 12 o'clock), diver direction of travel.

> Turn Arrow icon (left or right) ﬂashing during any time the diver deviates => 10° off the heading set.

> Dynamic Arrow, tracking Reference direction set.

> Tilt icon*, when the Compass is at an angle => 20° off level.

> Numeric heading (diver's current direction), 001 to 360°, with position graphic (N, E, SE, etc.). *

Blank when the Tilt icon is

displayed.

> On time remaining, counting down, if 15 to 0 (sec).

• S (2 sec) or no button action during 2 min - revert to Watch, Surface, or Dive Main.

• L (press) - to activate Backlight.

• M (< 2 sec) - to access Compass Menu, surface only.

• A (< 2 sec) - to access Reference Menu, surface or dive.

REFERENCE MENU, information includes (Fig. 150) -

> Graphic SEt, with selections ->

> REF HEADING -

To access REF OP Main with the Heading ﬂashing allowing it to be set.

> REVERSE HEADING -

To select it as the OP Mode with new Heading (180° opposite of Reference Heading set).

> On time remaining, counting down, if 15 to 0 (sec).

• A (< 2 sec) - to toggle selection.

• S (< 2 sec) - to save the selection and revert to OP Main.

Fig. 144 - NORTH OP MODE

Fig. 146 - REVERSE REF

Fig. 145 - REF OP MODE

Fig. 148 - NORTH OP MAIN

(at 280°)

Fig. 147 - COMPASS MENU

Fig. 149 - REF OP MAIN

(at 060°, turn left to 040°)

Fig. 150 - REF MENU

actual

heading

actual

heading

course

set

180°

opposite

set

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oceanic OCS Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oceanic OCS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info