Bedienungsanleitung Oceanic OCS (Seite 54 von 62) (Englisch)

551851

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

OCS OPERATING MANUAL

PC INTERFACE

The Settings Upload portion of the Oceanlog PC Interface (PCI) program can be used to set/change the Main Time, Date, Set A

group (Alarms), and Set U group (Utilities) using the Interface System. The Set F group (FO2) and FREE Mode Alarms must be

entered using the OCS's button controls.

Information available for retrieval (download) from the OCS to the PC program includes dive number, SI, max depth, EDT, start

date/time, lowest temperature, sampling rate, dive proﬁle, Set Points, TLBG, O2BG, and Gas Switching events.

Prior to attempting to download data from your OCS or upload settings to it, review the Help section of the PCI program. Recom-

mended is to print those sections of Help that you consider appropriate for your Interface activities.

A USB Driver is provided on the Oceanlog CD as part of the Interface System.

The OCS is conﬁgured with a Data Port located on the side (Fig. 161a) that enables it to be connected to a PC USB port using

the special Interface Cable.

To connect the PCI Cable to the OCS:

> position the connector with the red dot at 12 o'clock.

> align the pins of the cable connector with the holes in the data port and press the connector into the port (Fig. 162).

> turn the connector clockwise until the red dot is at 1 o'clock and it locks in (Fig. 163), then release it.

The OCS checks for a connection to the Data Port once every second while the Watch Default Time is displayed. Checks are not

made if the Wet Activation contacts are wet.

When the PCI cable is plugged in, the graphic PC COMM is displayed with a 2 minute countdown timer that runs until the con-

nection is conﬁrmed, then the graphics PC COMM CONNECTED are displayed until completion of the upload or download

operation.

PC Requirements:

• IBM

, or compatible, Personal Computer with USB Port

• Intel

Pentium 200 MHz or better microprocessor

• Microsoft

Windows

XP, Vista, or 7.

• Super VGA card or compatible video graphics adaptor (256 color or greater) with a minimum 800 X 600 pixel screen area

of display settings

• 16MB of available RAM

• 20MB of available hard drive storage

• Mouse

• CD Rom drive

• Printer

For software updates, refer to the Oceanic web site at -

www.OceanicWorldwide.com

For support, call OceanLog Support toll free at -

(866) 732-7877, 8 Am to 5 Pm USA Paciﬁc time.

CLEAR (RESET)

The OCS is conﬁgured with a feature that allows nitrogen and oxygen calculations to be cleared.

This is intended for facili-

ties using the OCS for rental or training activities, not for general use by individual divers.

WARNING: Reset after a dive and subsequent use for a repetitive dive conducted by the same diver

could result in serious injury or death.

Upon accessing the Clear screen, information displayed includes >> the graphics CLr CAUTION DELETES NI-O2 with an arbi-

trary invalid code number entered by the factory, all solid. Proceed as follows, or press S (2 sec) return to the SN screen

Reset procedure:

• S (2 sec), at any time, to cancel the procedure and revert to the SN screen.

• S (< 2 sec) to start the ﬁrst 2 digits (left) ﬂashing.

• A (hold) to scroll upward through the ﬁrst digits (left) at a rate of 8 per second.

• A (< 2 sec) to step upward through the digits (left) one at a time.

• M (< 2 sec) to step back through the digits (left) one at a time.

• S (< 2 sec) to save the ﬁrst 2 digits (left) and start the second 2 digits (right) ﬂashing.

• A (hold) to scroll upward through the second digits (right) at a rate of 8 per second.

• A (< 2 sec) to step upward through the digits (right) one at a time.

• M (< 2 sec) to step back through the digits (right) one at a time.

• S (< 2 sec) to save the reset code, clear the NI-O2 calculations, and revert to Watch mode.

Fig. 161 - PC DATA PORT

Fig. 163 - PCI CABLE

(turned, dot at 1 o'clock)

Fig. 162 - PCI CABLE

(insert with dot at 12 o'clock)

dot

TIMER

(counting down)

PCI CABLE

(connection sensed)

CLEAR (Reset)

Code #

dot

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oceanic OCS Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oceanic OCS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info