Bedienungsanleitung Octane Fitness Q47ce (Seite 9 von 52) (Englisch)

738187

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

E L E C T R O N I C S

Q47 Standard & Q47e/Q47ce Deluxe Consoles and Keypads

Welcome to some of the easiest to use, yet most sophisticated, electronics available in the fitness industry. In

purchasing your Octane elliptical you had three choices: the Q47 with standard electronics, the Q47e with deluxe

electronics, or the Q47ce with deluxe electronics plus contact heart rate sensors. Instructions for all are included

in this manual.

Programming the console DedicatedLogic

™

programming was created to give you the ultimate in ease of use

and total flexibility for programming your elliptical. This allows you to modify your

workout once you’ve started. You can even start your workout, then program the

electronics. This ease of use starts by giving each key only one function. This makes

it easy to understand how each key works.

Keypad Buttons

Quick Start The easiest way for you to start your workout is to simply push the Quick Start

button, setting the machine in a manual program at resistance level one with a

stride length of 21” (52 cm) and a user weight of 150 pounds (68 kg). Once you have

selected Quick Start, you can program any item in any order.

My QuickStart 1 & 2 The My QuickStart buttons take the traditional Quick Start to the next level by

memorizing your workout profile. My QuickStart remembers your favorite program

and attributes and, with a simple push of the button, retrieves them for your next

workout.

You can easily set your profile while using the machine. Simply begin your workout

and enter your information as usual—program, time, stride length, level, age, and

weight, adding X-Mode, ArmBlaster, GluteKicker, and/or SmartStride if you wish.

Once your elliptical cross trainer is set the way you like it, simply press and hold

the My QuickStart 1 (or My QuickStart 2) button until you hear the console beep

twice, indicating that this favorite profile has been saved. If you decide during your

workout to change what you have saved (for example, you decide to increase the

time or level), simply enter the changes on the console, then press and hold My

QuickStart again until you hear the two beeps. This resets your saved profile using

the new attributes.

The next time you are ready for your favorite workout, simply press the My QuickStart

button and begin pedaling. You may also switch to your favorite program after you

have started a workout; simply press Pause/Clear to reset the machine, then press

My QuickStart to begin your program.

Tip: Use My QuickStart 1 and My QuickStart 2 to save two different workouts.

Save the first one according to the directions above, then press Pause/Clear

and follow the steps again to save the second workout using the other My

QuickStart button.

Tip: If you feel like doing something different after you have started your favorite

workout with My QuickStart, simply enter your new information. This will

only change the current workout, not your saved favorite.

Note: Your profile is saved even when you unplug the machine.

(Q47e/Q47ce)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Octane Fitness Q47ce Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info