Bedienungsanleitung Ogatech og r400 (Seite 19 von 128) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

301443

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

OGATECH OG-R400

OGATECH OG-R400 19

ENGLISH

In the SMS list, private messages are flagged with a "p" in front of the name or number.

After selecting a private SMS, the user name appears on the screen.

• Enter the password and confirm with OK. You can now read the SMS.

9.4.5 Sending SMSs from your personal user account

Your OGATECH OG-R400 lets you send SMSs from a personal user account. Once you

have written the SMS:

• Select Options and then select User Name with the navigator and confirm with OK on

the left menu key.

• Select the account that you want to send the message from, and confirm with OK.

• Enter your password (if prompted) and confirm with OK.

• Select Send to with navigator and press OK.

• Enter the correspondent's telephone number, or look it up in the phonebook, and select

Send with the left menu key. If you select a “personal user account", the SMS will be sent

using your standard telephonenumber plus the user account number. E.g. If your

personal user number is "1" and your telephone number is 123456789, your

correspondents will receive an SMS from: 1234567891.

9.4.6 Deleting a personal user account

• Select SMS and confirm with OK.

• Select Settings with the navigator and press OK.

• Select Users and confirm with OK.

• Select Delete User with the navigator and press OK. All the personal user accounts

appear on the screen.

• Using the navigator, select the account to be removed and press OK.

• Enter the system PIN (the factory setting is 0000), and select OK. The account is deleted.

All the SMS messages received by the account are deleted; those sent from the account

are still saved in the Outbox.

9.5 ALLOCATING AN SMS TERMINAL NUMBER

It is possible for several SMS-enabled telephones to be connected up to the same line. So

that each telephone can continue to receive SMSs, they must be allocated different SMS

terminal numbers. This is network depending! To allocate a number:

• Select SMS and confirm with OK.

• Select Settings with the navigator and press OK.

• Select Terminal Number with the navigator and press OK.

• The number "0" is pre-set. To change it: Enter the preferred number (from 0 to 9) and

confirm with OK.

If you have already created personal user accounts, your OGATECH OG-R400 will not allow

you to allocate a terminal number that corresponds to an existing user number. If two SMS-

enabled telephones connected up to the same line have the same terminal number, neither

will be able to receive SMSs. They must be given differing numbers. E.g. If you have already

created a user account with the number "3", you must allocate a terminal number other than

"3".

Messages sent from a personal user account are stored in the Outbox.

In the outbox the messages are not protected by a password.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ogatech og r400 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info