Bedienungsanleitung OK OBH38731 (Seite 28 von 110) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch)

568777

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

Electrical connection and alterations

Caution!

• Check with an electrician whether the domestic wiring system is suitable without alterations. Any alterations must only be made by a

qualied electrician.

• The cord should not be extended or folded into coil during operation.

• Adapters, multi-socket strips and extension leads must not be used.

• Overloading could result in a risk of re.

Caution!

Before connecting to the power supply, check:

• The voltage meets requirements.

• The appliance uses an individual socket and does not share one with another electric appliance. A dedicated power protection switch

must be incorporated in the xed wiring in accordance with the wiring rules.

Selection of installation equipment

Cut out the work surface according to the following sizes.

OBH36731 OBH38731

L 590 mm 770 mm

W 520 mm 520 mm

H 60 mm 60 mm

D 56 mm 56 mm

A 560 mm 750 mm

B 490 mm 490 mm

X 50 mm (Min.) 50 mm (Min.)

• A minimum of 50 mm space shall be preserved around the hole.

• The thickness of the work surface must be at least 30 mm. Select heat-resistant work surface material to avoid larger deformation caused by

the heat radiation from the hotplate.

• The appliance must be well ventilated at all times. The air inlet and outlet shall not be blocked.

Observe the following sizes.

OBH36731 OBH38731

A 760 mm 760 mm (= minimum safety distance between hotplate and cupboard above the hotplate)

B 50 mm 50 mm

C 20 mm 20 mm

D Air intake Air intake

E 5 mm 5 mm (= minimum for air exit)

• The induction hob must be well ventilated and the air inlet and outlet at the bottom of the appliance must not be blocked. The fan situated at

the bottom of the hob must have sucient space and ow of fresh air at all times.

Seal the cut edge of the worktop with heat resistant silicone.

Place the appliance into the cut out. Push down rmly to t in place.

Preparation: Place the appliance on a stable, smooth surface (for example on the packaging). Do not apply force onto the controls protruding from

the appliance.

Adjusting the bracket position: Fix the appliance on the work surface by screwing 4 brackets on the bottom of hob after installation. Adjust the

bracket position to suit for dierent table top thicknesses.

The wires in the mains lead are coloured in accordance with the following code:

Brown and Black = L - Live

Blue and Grey = N - Neutral

Green/Yellow =

- Earth

The connection point must be placed in a position adjacent to the appliance so as to be readily accessible for an engineer in the event of a

breakdown.

For UK only

A Switched Fused Connection Unit to BS 1363 Part 4 is recommended.

The fuse must be rated at 32 Amps.

Any permanent electrical installation must comply with the latest I.E.E. Regulations and local electricity company regulations. For your own safety

a qualied electrician or contractor who is on the roll of the National Inspection Council for Electrical Installation Contracting (NICEIC) should

undertake the electrical installation.

When you have installed the hob, make sure that

• The power supply cable is not accessible through cupboard doors or drawers.

• There is adequate ow of fresh air from outside the cabinetry to the base of the hob.

• The isolating switch is easily accessible by the consumer.

• The cable is not bent or compressed.

• The cable is checked regularly and replaced by authorised technicians.

IM_OBH36731+OBH38731_141028_V07.indb 28 10/28/14 2:07 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

OK OBH38731 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info