Bedienungsanleitung OK ODL 43740U-DIB (Seite 77 von 145) (Deutsch, Englisch, Holländisch, Französisch)

674749

Zoom out

Zoom in

Vorherige Seite

1/145

Nächste Seite

English - 76 -

recording time may change in practice depending on

the broadcast. The reserved and free storage space

values will change according to this setting. Make

sure that you have enough free space otherwise

instant recording may not be possible.

Auto discard: You can set the Discard type as

None, Oldest, Longest or Shortest. If it is not

set to None, you can set the Unplayed option as

Included or Excluded. These options determine

the preferences for deleting the recordings in order

to obtain more storage space for ongoing records.

Hard disk information: You can view detailed

information about the USB storage device connected

to your TV. Highlight and press OK to see and press

Back/Return to close.

Format Disk: If you want to delete all files on the

connected USB storage device and convert the disk

format to FAT32, you can use this option. Press OK

button while the Format Disk option is highlighted.

A menu will appear on the screen, requiring you

to enter the PIN(*). After you enter the PIN, a

confirmation message will be displayed. Select Yes

and press OK to start formatting the USB storage

device. Select No and press OK to cancel.

(*) Default PIN could have been set to 0000 or 1234. If you

have defined the PIN(is requested depending on the country

selection) during the First Time Installation use the PIN

that you have defined.

3. Settings

You can manage the settings of your TV using the op-

tions of this menu. Refer to Settings Menu Contents

section for more information.

4. Apps

When your TV is connected to the Internet related

contents will also be available, including Apps related

contents. Using the Apps menu you can access and

manage your applications. You can add new apps from

the market or delete the existing ones. Refer to Apps

section for more information.

5. Sources

You can manage your input source references using

the options of this menu. To change the current source

highlight one of the options and press OK.

5.1. Source Settings

Edit the names, enable or disable selected source

options. There are also Regular, Enhanced and

Disabled options available for HDMI sources. Regular

and Enhanced options are affecting the colour settings

of the selected HDMI source. To be able to watch 4K or

HDR/HLG images from an HDMI source related source

setting should be set as Enhanced if the connected

device is compatible with HDMI 2.0 and subsequent

versions. Set as Regular if the connected device is

HDMI 1.4 compatible. Set accordingly or disable the

related HDMI source by setting as Disabled.

Inserting the Batteries into the Remote

Remove the back cover to reveal the battery compart-

ment. Insert two size AAA batteries. Make sure the (+)

and (-) signs match (observe correct polarity). Do not

mix old and new batteries. Replace only with same or

equivalent type. Place the cover back on.

A message will be displayed on the screen when the

batteries are low and must be replaced. Note that when

the batteries are low, the performance of the remote

control may be impaired.

Batteries should not be exposed to excessive heat

such as sunshine, fire or the like.

Power Connection

IMPORTANT: The TV set is designed to operate on a

220-240V AC, 50 Hz supply. After unpacking, allow the

TV set to reach the ambient room temperature before

you connect the set to the mains. Plug the power cable

to the mains socket outlet.

Antenna Connection

Connect the aerial or cable TV plug to the AERIAL

INPUT (ANT-TV) socket located on the rear side of

the TV.

Rear side of the TV

ANT-TV

If you want to connect a device to the TV, make

sure that both the TV and the device are turned off

before making any connection. After the connection

is done, you can turn on the units and use them.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

OK ODL 43740U-DIB Seite 77

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info