Bedienungsanleitung OK ODL 43740U-DIB (Seite 84 von 145) (Deutsch, Englisch, Holländisch, Französisch)

674749

Zoom out

Zoom in

Vorherige Seite

1/145

Nächste Seite

English - 83 -

Watching Recorded Programmes

Select Recordings from the TV menu. Select a

recorded item from the list (if previously recorded).

Press the OK button to view the Options menu. Select

an option then press OK button.

Note: Viewing main menu and menu items will not be available

during the playback.

Press the Stop button to stop a playback and return

to the Recordings.

Slow Forward

If you press Pause button while watching recorded

programmes, the slow forward feature will be available.

You can use Fast Forward button to slow forward.

Pressing Fast Forward button consecutively will

change slow forwarding speed.

Recording Configuration

Select the Settings tab in the TV>Recordings menu

to configure the recording settings and press OK.

Format Disk: You can use the Format Disk option for

formatting the connected USB disk. Your PIN will be

required to use the Format Disk feature.

Note: Default PIN could have been set to 0000 or 1234. If you

have defined the PIN(is requested depending on the country

selection) during the First Time Installation use the PIN that

you have defined.

IMPORTANT: Formatting your USB drive will erase

ALL the data on it and it’s file system will be converted

to FAT32. In most cases operation errors will be fixed

after a format but you will lose ALL your data.

If “USB disk writing speed too slow to record”

message is displayed on the screen while starting a

recording, try restarting the recording. If you still get

the same error, it is possible that your USB disk does

not meet the speed requirements. Try connecting

another USB disk.

Media Browser

You can play back music and movie files and display

photo files stored on a USB storage device by

connecting it to your TV. Connect a USB storage device

to one of the USB inputs located on the side of the TV.

After connecting a USB storage device to your TV

Media Browser menu will be displayed on the screen.

You can access the content of the connected USB

device any time later from the Sources menu. Select

the related USB input option from this menu and press

OK. Then select the file of your choice and press OK

to display or play it back.

You can set your Media Browser preferences by using

the Settings menu. Settings menu can be accessed

via the information bar which is displayed on the

bottom of the screen when pressed the Info button

while playing back a video file or displaying a picture

file. Press the Info button, highlight the gear wheel

symbol positioned on the right side of the information

bar and press OK. Picture Settings, Sound Settings,

Media Browser Settings and Options menus will be

available. The contents of these menus may change

according to the type of the currently open media file.

Only Sound Settings menu will be available while

playing back audio files.

Loop/Shuffle Mode Operation

Start playback and activate

All files in the list will be

continuously played in

original order

Start playback and activate

The same file will be

played continuously

(repeat)

Start playback and activate

All files in the list will be

played once in random

order

Start playback and activate

All files in the list will be

continuously played in

the same random order

To use the functions on the information bar highlight the

symbol of the function and press OK. To change the

status of a function highlight the symbol of the function

and press OK as much as needed. If the symbol is

marked with a red cross, that means it is deactivated.

Custom Boot Up Logo

You can personalize your TV and see your favourite

image or photo on the screen each time your TV boots

up. To do this, copy your favourite image files into a

USB disk and open them in the Media Browser. Select

USB input from the Sources menu and press OK.

When you have chosen the desired image, highlight

it and press OK to view it in full screen. Press the

Info button, highlight the gear wheel symbol on the

information bar and press OK. Select Options and

press OK to enter. Set Boot Logo option will be

available. Highlight it and press OK again to choose the

image as custom boot logo. A confirmation message

will be displayed. Select Yes and press OK again. If

the image is suitable(*) you will see it on the screen

during the TV’s next boot up.

Note: If you perform a First Time Installation the TV will

return to using the default logo, if any.

(*) Images must have an aspect ratio between 4:3 to 16:9

and they must be in .jpeg, .jpg or .jpe file formats. The image

cannot be set as boot logo, which’s resolution doesn’t appear

on the info banner.

FollowMe TV

With your mobile device you can stream the current

broadcast from your smart TV using the FollowMe

TV feature. Install the appropriate Smart Center

application to your mobile device. Start the application.

For further information on using this feature refer to

the instructions of the application you use.

Note: Depending on model, your TV may not support this

function. The application may not be compatible with all

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

OK ODL 43740U-DIB Seite 84

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info