783200
47
Zoom out
Zoom in
Vorherige Seite
1/259
Nächste Seite
EN
47
Connecting antennae, Internet and external devices
Connecting the TV antenna or cable TV
You can connect the cable from your indoor or
outdoor antenna or cable TV to the antenna socket
ANT1.
To switch to TV reception, press the Source button
repeatedly to select the signal source TV.
Connecting the satellite antenna
You can connect the cable of your satellite antenna to
the ANT 2 SATELLITE socket.
To switch to satellite reception, select signal source
“TV.
Connecting the network cable (LAN connection)
You can also establish an internet connection via WiFi.
Connect one end of the network cable (Cat. 5 or better) to the
network port. Connect the other end of the network cable to a
hub or router on your home network. The network cable is not
supplied.
Connecting external equipment with HDMI interface
HDMI is the abbreviation for “High Denition Multimedia Interface” and allows the digital transmission
of both audio and video signals over the same cable. This connection oers the best playback quality
and is the right choice for fans of HD content.
You can connect up to 3 HDMI devices to your TV set. If
you wish to connect an ARC-compatible HDMI device
(e.g. a home cinema), you need to use socket HDMI 1.
To transmit the audio via ARC you also have to enable
the "ARC" option in "Setting", "System", "CEC".
1. Connect the output from a playback device, e.g. an
HDMI-compliant computer or Blu-ray player, to one
of the HDMI inputs on the TV. To do this, you will need an HDMI cable (not supplied).
2. In order to play the audio and video signal fed in from the external device on the TV, select the
signal source as appropriate.
Connecting a PC
1. Use an HDMI cable (not supplied) to connect the
output from the graphics card of a PC or laptop to
one of the HDMI inputs of the TV. This connection
is used to transfer the video and audio from the
PC to the TV set.
2. In order to play the audio and video signal fed in
from the PC on the TV, select the signal source as appropriate.
Your PC must have an HDMI-compliant graphics card in order to connect to your TV set. It is
not possible to connect a PC with an analogue (VGA) output.
Connecting a digital audio system
You can connect your TV set to a digital audio system
(e.g. amplier, home cinema).
1. Connect the plug at the end of a coaxial audio cable
(not supplied) to the Digital Audio Out connection
on your TV set.
47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für OK ODL 65951UC-TAB wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info