Bedienungsanleitung OK ODL55641U-DIB (Seite 12 von 30) (Englisch)

674753

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

English - 72 -

Recording Conguration

Select the Recording Settings item in the Media

Browser>Settings menu to congure the recording

settings.

Format Disk: You can use the Format Disk feature

for formatting the connected USB disk. Your PIN is

required to use the Format Disk feature.

Note: Default PIN can be set to 0000 or 1234. If you have

dened the PIN(is requested depending on the country

selection) during the First Time Installation use the PIN

that you have dened.

IMPORTANT: Formatting your USB drive will erase

ALL the data on it and it’s le system will be converted

to FAT32. In most cases operation errors will be xed

after a format but you will lose ALL your data.

If “USB disk writing speed too slow to record”

message is displayed on the screen while starting a

recording, try restarting the recording. If you still get

the same error, it is possible that your USB disk does

not meet the speed requirements. Try connecting

another USB disk.

Media Browser Menu

You can play photo, music and movie les stored on a

USB disk by connecting it to your TV. Connect a USB

disk to one of the USB inputs located on the side of

the TV. Pressing the Menu button while in the Media

Browser mode will access the Picture, Sound and

Settings menu options. Pressing the Menu button

again will exit from this screen.

You can set your Media

Browser preferences by using the Settings menu.

Loop/Shue Mode Operation

Start playback with the Play

button and activate

All les in the list will be

continuously played in original

order

Start playback with the OK

button and activate

The same le will be played

continuously (repeat)

Start playback with the Play

button and activate

All les in the list will be

played once in random order

Start playback with the Play

button and activate

All les in the list will be

continuously played in the

same random order.

FollowMe TV (if available)

With your mobile device you can stream the current

broadcast from your smart TV using the FollowMe

TV feature. Install the appropriate Smart Center

application to your mobile device. Start the application.

For further information on using this feature refer to

the instructions of the application you use.

Note: This application may not be compatible with all mobile

devices. Both of the devices must be connected to the same

network.

CEC and CEC RC Passthrough

This function allows to control the CEC-enabled

devices, that are connected through HDMI ports by

using the remote control of the TV.

The CEC option in the System>Settings>More menu

should be set as Enabled at rst. Press the Source

button and select the HDMI input of the connected CEC

device from the Sources List menu. When new CEC

source device is connected, it will be listed in source

menu with its own name instead of the connected HDMI

ports name(such as DVD Player, Recorder 1 etc.).

The TV remote is automatically able to perform the

main functions after the connected HDMI source has

been selected.

To terminate this operation and control the TV via

the remote again, press Quick Menu button on the

remote, highlight the CEC RC Passthrough and

set as Off by pressing Left or Right button. This

feature can also be enabled or disabled under the

System>Settings>More menu.

The TV supports also ARC(Audio Return Channel)

feature. This feature is an audio link meant to replace

other cables between the TV and the audio system

(A/V receiver or speaker system).

When ARC is active, TV does not mute its other audio

outputs automatically. So you need to decrease TV

volume to zero manually, if you want to hear audio from

connected audio device only (same as other optical or

co-axial digital audio outputs). If you want to change

connected device’s volume level, you should select

that device from the source list. In that case volume

control keys are directed to connected audio device.

Note: ARC is supported only via the HDMI1 input.

System Audio Control

Allows an Audio Amplier/Receiver to be used with the TV.

The volume can be controlled using the remote control of

the TV. To activate this feature set the Speakers option

in the System>Settings>More menu as Amplier. The

TV speakers will be muted and the sound of the watched

source will be provided from the connected sound system.

Note: The audio device should support System Audio Control

feature and CEC option should be set as Enabled.

E-Manual (if available)

You can nd instructions for your TV’s features in the

E-Manual.

To use E-Manual, press to the Info button while main

menu is displayed on the screen or press Quick Menu

button, select Information Booklet and press OK.

By using the directional buttons select a desired

category. Every category includes dierent topics.

Select a topic and press OK to read instructions.

To close the E-Manual screen press the Exit or Menu button.

Note: The contents of the E-Manual may vary according to

the model.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

OK ODL55641U-DIB Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von OK ODL55641U-DIB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info