Bedienungsanleitung OK ODW 6011 A2 FS B (Seite 22 von 80) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

783029

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

Size = A5

OPERATION

Washing dishes

11 • Consider following steps to start the washing process:

1. Load the dishwasher basket.

2. Add detergent or rinse aid.

Important: Make sure the water-tap/water supply is open, the appliance is connected to the

mains and the door is closed correctly.

3. Push the switch to turn on the dishwasher.

4. Press P to choose your program, refer to chapter Choosing Program. If the dishwasher is

not completely loaded, then you can additionally select the half load mode. This mode

allows you to save both water and electricity when using the bottom and top basket of your

dishwasher. Press the button 1/2 and the half load indicator lights up.

Note:

• This mode can only be used with the program setting Intensive, ECO and 90 min.

• We recommend to use the half load function if the dishes are only slightly soiled.

5. For timer function (delay), please refer to chapter TIMER - DELAY WASHING. Push the

button.

• To stop the process push the button again.

Note: The program lights show the state of the dishwasher:

a) Program light on: standby or pause.

b) Program light blinking: washing process ongoing.

6. When the working cycle has nished, the buzzer of dishwasher will sound 8 seconds, then

stop.

- Turn o the appliance using the button and shut o the water supply.

- Open the door of the dishwasher.

Warning! It is dangerous to open the door when washing, because the hot water may scald

you.

- Wait a few minutes before unloading the dishwasher to avoid handling the dishes and

utensils while they are still hot and more susceptible to breakage. They will also dry better.

- Unload the dishwasher.

Change/ pause the washing cycle

• You can modify the washing program when the dishwasher just runs for a short time. Otherwise,

the detergent may have already been released, and the appliance may have already drained the

wash water.

- Press the button and then the Program selection button P for more than 3 seconds. The

machine will switch to standby mode.

- Change the program to the desired cycle setting.

- Press the button again to continue washing process.

Note: If you open the door during washing, the machine will pause. When you close the door, the

machine will continue working after 10 seconds.

• If you forgot a dish you can pause the process and add it, but make sure the detergent

compartment has not already opened.

1. Press button to pause the washing process.

2. After the spray arms have come to rest, you can open the door completely.

3. Add forgotten dishes.

4. Close the door and press the button again and the dishwasher will continue after 10

seconds.

IM_ODW6011 A2 FS B_190415_V04_HR.indb 22 15/4/2019 13:44

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

OK ODW 6011 A2 FS B Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info