Bedienungsanleitung OK OLE 228 W-D4 (Seite 5 von 45) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch)

547518

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

Getting started - initial set up

1. Using the RF cable supplied, connect the TV to the TV Aerial wall socket.

Connect the power cable to the Electrical outlet.

2. Turn on the device with marked ON/OFF switch

3. Insert the batteries supplied into the Remote control and press the Standby

button to power on the TV.

4. You will now be welcomed with the initial set-up screen. If it does not appear, on

the remote control, please press [MENU] then 8-8-8-8 and the menu will appear.

Press OK on the remote control and tuning will star

As part of our continuing e orts to reduce energy consumption, we added a

new Ecohome feature (appears on the  rst installation screen). This function

helps reduce energy consumption up 15% compared to other modes. The image

brightness is reduced using Ecohome mode. If this setting does not suit your

environment, you can choose from other modes (Note: the professional mode is

the optimal default mode, but consumes 15% more than the Ecohome).

Please select desired language, country and environment. Set LCN* to ON if you

want to arrange found channels by cable provider preferences (only applies to

DVB-C channels).

Press [OK] button to start the tuning process.

5. In the next step select the type of digital broadcasting. You can choose between

DVB-T (terrestrial), DVB-C (cable) or DVB-S2(satellite). The analog channel will be

searched automatically, as most of the cable network includes analog channels.

6. Select DVB-C if your TV is connected to a cable TV network. Keep all default

settings as it is recommended .Then press [OK] to start the search. If DVB-C

channels are not found, contact your net

work provider for the valid "Network

ID". Then perform a new search. Press the [MENU], select "Network ID" and enter

the network ID. Start your search by clicking [OK].

7. Optional channel presets DVB-S2*: Select "Satellie" in the "Digital-type" in

the menu for the optional channel presets. Here you can choose between the

various satellites. Since selection completed, then the channel list of the exact

satellite will be available to be imported into your TV system. This take several

seconds. Con rm with [OK] button on the remote control, to start scanning.

If you are missing channels, the reason for this is likely to be signal strength, you

should consider connecting signal booster and re-tuning the TV.

Tip:

If the TV  nds some, but not all, of the Digital channels, the TV is functioning

correctly but the signal being received is not strong enough. (The signal

strength needs to be above 85% - you can see the signal strength the TV is

receiving when you change channels/ programmes) you will need to increase

the signal reception in order to receive all of the channels available. The most

economical way to do this is by purchasing and connecting a ‘signal booster’ in

between the TV and the TV aerial socket. If this does not solve the problem, you

will need to upgrade the TV aerial to a digital hi-gain compatible aerial.

* - Only for models with DVB-S tuner

5,6

DTV

USB

DVD

RADIO

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

OK OLE 228 W-D4 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info