Bedienungsanleitung OK OLE 32350-B SAT (Seite 24 von 47) (Deutsch, Englisch, Französisch)

547362

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

English - 23 -

Switching On/Off

To Switch the TV On

Connect the power cord to the 220-240V AC, 50 Hz.

To switch on the TV from standby mode either:

Press the “ ” button, P+ / P- or a numeric button on

the remote control.

Press the side function switch until the TV comes on

from standby.

To Switch the TV Off

Press the “ “ button on the remote control or press the

side function switch until the TV switches into standby

mode.

To power down the TV completely, unplug the

power cord from the mains socket.

Note: When the TV is switched to standby mode, the standby

LED can blink to indicate that features such as Standby Search,

Over Air Download or Timer is active. The LED can also blink

when you switch on the TV from standby mode.

First Time Installation

When turned on for the first time, the language

selection screen is displayed. Select the desired

language and press OK.

The First Time Installation (FTI) screen will be

displayed next. Set your preferences using the

navigation buttons and when nished, press OK to

continue.

You can activate Store mode option to be available

in “Other settings” menu and your TV’s features will

be illustrated on the top of the screen. A conrmation

screen will be displayed. Select YES to proceed.

If Home Mode is selected, Store mode will not be

available after the First Time Installation. Press OK

button to continue.

Aerial Installation

If you select AERIAL option from the Search Type

screen, the television will search for digital terrestrial

TV broadcasts.

NOTE: You can press MENU button to cancel.

After all the available stations are stored, the

Channel List will be displayed on the screen. If

you like how the channels are sorted according to

the LCN (*), please select “Yes” and than press OK.

Press MENU button to quit channel list and watch TV.

(*) LCN is the Logical Channel Number system that

organizes available broadcasts in accordance with a

recognizable channel sequence (if available).

Cable Installation

If you select CABLE option and press OK button on the

remote control. To continue, please select YES and

press OK. To cancel operation, select NO and press

OK. You can select frequency ranges from this screen.

Enter the frequency range manually by using the

numeric button.

Note: Searching duration will change depending on

the selected search step.

Satellite Installation

If you select Satellite option from the Search Type

screen, you can set a satellite and watch the satellite

channels. When you select Satellite installation,

Antenna Type menu will be displayed.

There are three types of antenna selection. You can

select Antenna type as Direct, Unicable or DiSEqC

switch by using “ ” or “ ” buttons.

Direct: If you have a single receiver and a direct

satellite dish, select this antenna type. After selecting

Direct, another menu screen will be displayed. Select

an available satellite and press OK to scan for services.

Unicable: If you have multiple receivers and a

unicable system, select this antenna type. Press OK to

continue. Congure settings by following instructions

on the screen. Press OK to scan for services.

DiSEqC switch: If you have multiple satellite dishes

and a DiSEqC switch, select this antenna type. After

selecting DiSEqC switch, another menu screen will

be displayed. You can set four DiSEqC options (if

available). Press GREEN button to scan all satellites

or press YELLOW button to scan only the highlighted

satellite. To save and exit press OK button. If you

select a DiSEqC option, Search Type screen will be

displayed. Select an option and continue.

The following options will be available:

Start Regular Search: Performs a full-band search.

Search Astra Service List: Performs the search in

accordance with the Astra Service List.

Pre-Programmed List: Performs the search in

accordance with the preset channel list.

Getting Started

First Time Installation - USB Connections

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

OK OLE 32350-B SAT Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von OK OLE 32350-B SAT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info