Bedienungsanleitung OK OLE22540H-TB DVD (Seite 9 von 23) (Englisch)

674766

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

English - 53 -

If your hard drive’s capacity is above 1TO, you

may experience some issues with formatting. Avoid

disconnecting your reader quickly after inserting it in

the television’s USB port. This can physically damage

the USB reader and the USB device itself. Never

remove the USB while a le is being read.

Recording a programme

IMPORTANT: When using a new USB hard drive

reader, it is advisable to rst format the disk using the

“Format disk” option of your television.

Note:To record a programme, you first have to

connect a 2.0 compatible USB device at least, if not

an error message will appear, to your television which

you would have turned off before this. Then turn on the

TV set in order to enable the record function.

To use the record function, you have to connect a

USB key or an external hard drive to the television.

The USB key connected should have a capacity of 1

GB at least. A 4 Go key is recommended.

Note: Programmes recorded are saved on your

USB device. You can ‘‘copy’’ these recordings on a

computer if you want. However, they can be read only

on your television.

Note: You cannot record radio broadcasts. The

maximum duration of a recording is unlimited. During

simultaneous recording (time shift) an image-sound

gap may occur.

Programmes recorded are divided into 4 GB partitions.

If the write speed of the USB device connected is

insufcient, the recording may fail and the time shift

option may not be available.

As such, it is advisable to use USB devices that are

HD compatible.

Avoid disconnecting your USB device during

recording. If you do, you may damage the device.

It is possible to have multiple partitions on your device

(maximum of 2). The television can support a maximum

of two different partitions. The rst partition of the USB

disk will be used for the recording function (PVR).

Due to some antenna issues, it will not be possible

to record some signal data. Also, the images may be

blurry during playback.

The Record, Play, Pause, Display buttons (for

PlayListDialog) are not active in Teletext mode. If a

recording starts from the timer when the teletext is

active, the latter will be disabled automatically. Teletext

does not function in multimedia mode.

Time shift recording

Press the (PAUSE) button while watching a

programme to switch to delayed replay mode. When

you use this mode, the programme pauses and the

recording continues.

Press the (PLAY) button again to watch the paused

programme. Press the STOP button to stop recording

and return to real time broadcast

Note: This function is not available in radio mode. You may

use the fast forward /fast rewind buttons to browse.

Note: You cannot use the fast rewind and fast forward buttons

if you are not in play mode.

Instant Recording

Press the (RECORD) button to start instant

recording of a programme while you’re watching it.

The recording will be done based on the EPG. You

can press the (RECORD) button on the remote

control again to record the next programme on the

EPG (Electronic Programme Guide). In this case, the

programmes scheduled for recording will be displayed

on the screen. Press the (STOP) button to cancel

instant recording.

Note: In instant recording mode, you cannot change channels or

watch a source other than that being recorded. When recording

a programme during a time shifting, a warning message will

appear on the screen if your USB device’s speed is not sufcient.

Watching recorded programmes

Select the Recordings in library option under the

media browser menu. Select one of the recordings

in the list. Press the OK button to display the play

options. Select an option and press the OK

Note: The display of the main menu and the submenus are

not available when playing recordings.

Press the (STOP) button to stop playing and return

to the recordings in the Library.

Slow forward

If you press the (PAUSE) button while watching a

recorded programme, the slow forward option will be

available. You can use the button for the slow

forward. To modify the slow forward speed, press the

button.

Record settings

Select Record settings option in the Settings menu

to congure recording parameters.

Format the disc : You can use the disk formatting

option to format the connected USB disc. Your PIN

code will then be asked.

The default PIN code can change depending on

the country selected.

If a PIN code is required to display a menu option,

enter one of the following codes: 4725, 0000 or 1234.

IMPORTANT : Note that all the data contained in

the USB device will be lost and the device will be

formatted using FAT32. Also, if your USB device does

not function properly, you can try to format it. In most

cases, formatting the USB device solves the problem,

however, ALL the data contained in the USB disc are

lost in the same situation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

OK OLE22540H-TB DVD Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von OK OLE22540H-TB DVD

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info