Bedienungsanleitung OK OPD 260 (Seite 16 von 132) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch)

782935

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

Size = A5

27 EN

• OSD Language

Select OSD Language in the SETUP MENU and con rm with ENTER button. Press or button to

select a desired language. Press the ENTER button to con rm.

• Closed Captions

Closed captions are data that are hidden in the video signal of some discs.

Note: Before you select this function, please ensure that the disc contains closed captions information

and your TV set also has this function.

• Screen saver

Activate /de-activate the screen saver.

Note: Not all player support this function.

• AUTO Standby

Set the auto standby time of the DVD Player.

AUDIO SETUP PAGE

6 Select Audio in the Setup Menu. Press or button to select a desired item, then press the

ENTER button to con rm.

• SPEAKER SETUP

This option is used to set the 5.1 Channel speakers.

• DIGITAL AUDIO

This option is used to select the SPDIF output and LPCM spdif output rate.

• DOLBY DIGITAL

The option included Dual Mono and Dynamic.

• EQUALIZER

This option is used to set equalizer:

- SOUND MODE

- BASS BOOST

- SUPER BASS

- TREBLE BOOST

VIDEO SETUP PAGE

7 Select Video in the SETUP MENU. Press or button to select a desired item, then press the

ENTER button to con rm.

• RESOLUTION

This option is used to set the resolution.

• COLOR SETTING

Here you can set di erent color setting:

- SHARPNESS

- BRIGHTNESS

- CONTRAST

- HUE

- SATURATION

• HDMI SETUP

Setting the options related to the HDMI.

- HDMI: ON or OFF

- AUDIO SOURCE: AUTO/PCM

- DEEP COLOR: 24 BIT / 30 BIT / 36 BIT

BEFORE FIRST TIME USE

• Remove the product and accessories carefully from the original packaging. It is recommended to keep

the original packaging for storage. If you wish to dispose of the original packaging, please observe

applicable legal provisions. Should you have any questions regarding proper disposal, contact your

local waste management center.

• Inspect the delivery contents for completeness and damages. Should the delivery contents be

incomplete or damaged, contact your sales outlet immediately.

• After unpacking, please refer to chapter Cleaning and care.

OPERATION

Installing remote control batteries

1 Open the battery cover on the back of the remote control. Insert 2 batteries (AAA, 1.5 V). Ensure the

+ and − polarities of the batteries line up with the markings inside the case. Close the cover.

Connecting to TV

Caution: Disconnect the AC power cord before connecting any devices.

2 Connect the DVD player to the TV with an HDMI, Video or SCART cable.

Note: If you would like to connect the DVD player to a TV set, a good quality shielded HDMI cable

must be used, which ensures the electromagnetic compatibility of the player and the HDMI cable

as a whole.

Audio

3 Connect the DVD player's R and L jack to the audio input jack on the TV.

Note: Only necessary when connected via Video cable.

Plugging in the power cord

4 Connect the power plug to a suitable power outlet.

OSD

SETUP MENU

5 Press the SETUP button on the remote control. SETUP MENU will be displayed. After accessing

the SETUP MENU, press or button to select an item desired, then press the ENTER button to

conrm. Press button return to the next upper menu. To exit the setup, press the SETUP button

again. In the SETUP MENU, you may choose any of the following options as you like.

• TV Display

Select TV Display in the SETUP MENU and conrm with ENTER button. Press or button to select a

desired format, then press the ENTER button to conrm.

Note: The image display ratio is related to the recorded disc format. Some disc cannot display images

in the aspect ratio you choose. If you play a disc recorded in 4:3 format on a wide screen TV, black bars

will appear on the left and right side of the screen. You must adjust the screen setting depending on

the type of the television you have.

• Angle Mark

Select Angle Mark in the SETUP MENU and conrm with ENTER button. Press or button to switch

on or o the angle. Press the ENTER button to conrm.

IM_OPD260_190619_V02_HR.indb 16 19/6/2019 09:39

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

OK OPD 260 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info