Bedienungsanleitung OK OPR3040 (Seite 6 von 11) (Englisch)

674954

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

17. Remote control window

18. Pivoting mount

19. Audio output

20. AV video output

21. USB slot

22. USB slot

23. HDMI input

24. HDMI input

25. VGA input

4. FUNCTIONS

Projector

Main components

CAUTION

1 Improper installation of batteries can result in leaks and corrosion to the battery and damage to the device.

Corrosion, oxidation, battery leaks and other gradual defects will invalidate the warranty.

1 If you do not use the appliance for an extended period, remove the batteries.

1 Do not put the appliance near a heat source. This could damage the appliance.

1 Put the appliance on a horizontal at surface.

1 Keep minimum (50 mm) space around the appliance for optimal ventilation.

Remarks

5 If this appliance is equipped with rubber feet to prevent it from moving: The feet are made from non-migrating

material specially formulated to avoid leaving any marks or stains on furniture. However, certain types of furniture

polishes, wood preservatives or cleaning sprays cause the rubber to soften and leave marks or a residue on

the furniture, and potentially risk the surface to become damaged. To prevent damage to wooden surfaces, we

recommend that you apply self-adhesive pads to the bottom of the rubber feet before installation.

5 We recommend that you retain the original carton and packaging materials in case it ever becomes necessary

to return your product for service. This is the only way to safely protect the product against damage in transit.

If you do dispose of the carton and the packaging materials, please remember to recycle with due care to the

environment.

3. PREPARATIONS FOR USE

3.1 Unpacking

• Unpack the appliance carefully.

• Check the package contents as described below. If any item is missing, please contact your reseller.

5 We recommend that you retain the original carton and packaging materials in case it ever becomes necessary

to return your product for service. This is the only way to safely protect the product against damage in transit.

If you do dispose of the carton and the packaging materials, please remember to recycle with due care to the

environment.

3.2 Package contents

5 If any item is missing, please contact your reseller.

The following items are included in the received package:

• 1x Projector

• 1x Remote control

• 1x Mains cable

• Lens cap

• VGA cable

• AV video cable

• User manual

• Cleaning cloth

Remote control

Remote control buttons

26. PLAY/PAUSE button

27. MENU button

28. VOLUME DOWN button

29. LEFT arrow button

30. ENTER button

31. ROTATE button

32. ON/OFF button

33. BACK button

34. UP arrow button

35. RIGHT arrow button

36. DOWN arrow button

37. VOLUME UP button

38. INPUT button

5. INSTALLATION

5.1 Picture size and projection distance

The following picture sizes can be achieved with the following projection distances (distance between the projector and

the wall):

• 45.7 inch: 35 inch (1.16 m: 89 cm)

• 59.1 inch: 46 inch (1.50 m: 117 cm)

• 70.9 inch: 58 inch (1.80 m: 147 cm)

• 78.7 inch: 64 inch (2.00 m: 163 cm)

• 98.4 inch: 81 inch (2.50 m: 206 cm)

• 118.1 inch: 100 inch (3.00 m: 254 cm)

• 140.2 inch: 120 inch (3.56 m: 305 cm)

• 157.5 inch: 134 inch (4.00 m: 340 cm)

• 187.8 inch: 160 inch (4.77 m: 406 cm)

5.2 Positioning and adjustment

• Place the projector on a solid, horizontal surface.

• If necessary, tilt the mount (18) to set the projector at an angle.

• Remove the lens cap.

• Direct the projector onto a white wall using the lens. Bear in mind the distance required to the wall in relation to the

picture size that you wish to achieve, see the previous paragraph.

• Connect the plug on the mains cable to the power input (1) on the projector.

• Connect the mains plug to a wall socket.

• Switch on the power using master power switch (2).

• Press ON/OFF (7)(32) to switch the projector on. The projector will warm up and project the menu onto the wall.

• Use the focus ring (4) to adjust the sharpness of the picture.

• Use the keystone correction ring (3) to correct the picture if it takes on a vertical trapezium shape.

5.3 Connecting a playback device

HDMI connection

• Use an HDMI cable to connect the HDMI output of a device (e.g. a computer, DVD player or media player) to the

HDMI input on the projector (23)(24).

VGA connection

• Use the VGA cable supplied to connect the VGA output of a computer or laptop to the VGA input of the projector

(25).

AV video connection

• Use the supplied AV video cable to connect the AV video output of a video device to the AV video input on the

projector (20).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

OK OPR3040 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von OK OPR3040

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info