Bedienungsanleitung Okbaby Eggy Relax (Seite 7 von 61) (Alle Sprachen)

773002

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

8 9

ENGLISH

Rear child‘s seat Eggy / Eggy RelaxRear child‘s seat Eggy / Eggy Relax

3) Adjust the seat and its components in order to give the child

the most comfort and safety. When the child is in the seat, the

backrest should be slightly tilted backwards, so as to prevent

the child from sliding forward.

4) Check to ensure that each part of your bicycle is working prop-

erly with the seat mounted.

5) Check the existence of any laws present in your State that gov-

ern the use of child bike seats.

6) Check initially and then periodically that the weight and size of

the child does not exceed the maximum allowed by the seat.

7) Check that the child or part of its clothes do not come into con-

tact with moving parts of the seat or bicycle. Avoid the child’s

hands and feet coming into contact with the wheel or being

caught in the brakes.

8) Ensure that there are no sharp edges that could come into

contact with the child (for example, frayed or deteriorated wires

etc.).

9) Ensure that the safety belts are not loose and do not come into

contact with the moving parts of the bicycle, especially with the

wheels, even when the child is not being carried in the seat.

10) Always use the safety belts. Make sure your child is properly

secured with the seat belts.

11) The child in the seat must be clothed and protected from the

cold more than the person riding the bicycle. Protect the child

from rain.

12) It is advised to make the child wear an approved protective

helmet.

13) Check that the seat is not too hot (e.g. overheated by the sun)

prior to placing the child in it.

14) Remove the seat when the bicycle is transported by car. Strong

wind could damage the seat or detach it from the bicycle, caus-

ing accidents.

15) Cover any saddle springs to avoid a child’s fingers being

trapped and/or squashed by them.

16) Before each use, check the seat is fitted onto the fastening block

correctly: on pulling the support arm upwards, the fastening

block must hold the seat down firmly.

17) The seat material (polypropylene) loses some of its mechanical

properties with ageing if exposed for longer periods to environ-

mental conditions (sun, rain, ice, etc.). In the case of normal use

and exposure to environmental conditions, the seat should be

replaced after 3 years.

Warnings

1) WARNING: Do not place any additional baggage on the

seat. Any additional baggage must be placed on the opposite

side of the bicycle with respect to the seat. For example: if the

seat is in the rear of the bicycle, use a front bag carrier and vice

versa

2) WARNING: Do not modify the seat.

3) WARNING: Riding the bicycle may be different with a child in the

seat, especially regarding balance, steering and braking.

4) WARNING: Never park the bicycle leaving the child unattended

in the seat.

5) WARNING: Do not use the seat if any part is missing or broken.

Mounting and assembling the child seat

Illustration 1:

Check the diameter of the frame and choose the most suitable plas-

tic adaptor (10). The reference diameter is indicated on each adap-

tor. Fix the fastener block (7) and the fastener counter-block (6) in

place, placing the plastic adaptor (10) and the soft plastic reducer

(11) in between them. The plastic adaptor (10) has specific grooves

to hold the cable glands welded to the frame and the cables. Do

not tighten the fastener screws (8) completely so you can adjust the

vertical position of the child seat; when the height is right; tighten

the screws firmly in place. Optimal torque is 8Nm.

Illustration 2:

Free the support arm (5) from the fastener ring and extract it from

the housing.

Illustration 3:

Insert the support arm (5) in the housing as illustrated in the dia-

gram and push the guide plate (5) until it reaches the guide seat and

can go no further (see also figure 4).

Illustration 4:

Insert the locking pin (9) into the hole B.

Illustration 5:

Rotate the locking pin 90° clockwise and click the locking pin safety

clip into the free space (see zoomed view).

WARNING: The locking pin is an important safety precaution and

must always be in place. Always check that it is positioned correctly

before every trip!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Okbaby Eggy Relax Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info