Installing upgrades > 66
Connecting Using WPS
If the wireless LAN access point supports WPS, the connection to the wireless LAN can be
made easily by using the easy setup button (WPS button).
Follow the procedure below for the setup.
1. Confirm the position of the easy setup button and when to press the button by
ref
erring to the user manual of the wireless LAN access point.
2. Confirm that the wireless LAN access point has been activated and is functioning
norma
lly.
3. Turn on the printer.
When SETU
P WIRELESS? app
ears, select YES. Proceed to Step 6.
4.
Press
up
or
down
on the operator panel to display
WIRELESS(INFRASTRUCTURE)
SETTING
, and then press the
OK
button.
5. Enter the Admin password, and then press the OK button.
(The default password is 999999.)
6. Press up on t
he operator panel to select ENABLE, and then press the OK button.
7. Press up or down
on the operator panel to display WPS SETUP, and then press the
OK button.
8. Select WPS-PBC, and
then press the OK button.
9. Select YES, and then
press the OK button.
10. The Printer starts searching for wireless LAN access points. During 2 minutes, press
the
easy setup button for the wireless LAN access point for a few seconds.
Once the setup completion screen is displayed, it indicates that the wireless LAN
setu
p has completed.
Set the IP Address
Set a different IP address for the wireless LAN from that of the wired LAN. Enter the setting
menu and make the settings by the following procedure.
1.
Press
up
or
down
on the operator panel to display
WIRELESS(INFRASTRUCTURE)
SETTING
, and then press the
Enter
button.
2. Enter the Admin password and then press the OK button.
(The default password is 999999.).
3. Press up or dow
n on the operator panel to display NETWORK SETTING.
4. AUTO or MANUAL in th
e IP ADDRESS SET.
If MANUAL is s
elected, manually input the IPv4 Address, Subnet Mask and Gateway
Address.
