Bedienungsanleitung Oki C542 (Seite 139 von 152) (Englisch)

665198

139

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

- 139 -

6. Troubleshooting

Wireless settings are incomplete.

Wrong values are set or items remain unset in the wireless LAN settings. Check the wireless settings.

Not connected to wireless access point.

No wireless LAN access points are found.

Make sure that the access point is turned on.

Disconnect and re-connect to wireless LAN.

Wireless startup failed.

Turn the machine off, check that the wireless LAN module is correctly installed, and then reboot the machine. If the

error persists, contact your dealer.

Firmware Update Error Please try again. If network doesn't work, please try firmware

update over USB.

Updating the firmware failed. Update again.

Registering with Google Cloud Print. Don't turn off the power until registration is

complete.

This machine is being registered to the Google Cloud Print service. Wait for a while.

Deleting from Google Cloud Print.

This machine is being removed from the Google Cloud Print service. Wait for a while.

Caution, unknown Consumable detected Go to User Manual "Trouble Shooting" to

restore operation Error: 709

You can use any consumables in your product, but you must accept the risks of using non-genuine consumables.

If the use of non-genuine consumables causes damage to the product or results in your product not functioning to its

full specification, then such damage or effect on the product is not covered by warranty.

To accept these risks and to restore function;

(1) Turn off your product.

(2) Press and hold the (CLEAR) button and turn your product on.

(3) After start up, release the (CLEAR) button.

Note: This operation will be recorded for future reference.

Replace the image drum. [PAGES] Pages Left.

The image drum indicated on the screen reaches its lifetime.

Replace the image drum with a new one.

C: Cyan (blue), M: Magenta (red), Y: Yellow, K: Black

Receiving data timeout.

Data could not received within a certain period of time.

Set a longer data reception timeout value.

IPv4 address is conflicted. Please change IPv4 address.

The IP address assigned to this machine is duplicated with that of another device.

Check the IP addresses, and then assign another IP address.

Simplex printing was performed as the paper setting did not allow duplex printing.

Duplex printing is not available on the specified paper.

Check the size and thickness of paper.

Press [Close].

Changing Language. Panel operation is disabled.

Display language is being changed.

Wait for a while.

Language Change Failed. Error num: %CODE%

Switching display languages failed. Press the (Power) button to turn the machine off, and then back on.

Detected an abnormality of internal database. The data must be deleted. After pressing

[Format], the data will be deleted, and then reboot.

Data base is beyond restoration.

To delete the data base, press [Format].

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oki C542 Seite 139

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oki C542

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info