665200
34
Zoom out
Zoom in
Vorherige Seite
1/93
Nächste Seite
Menu functions > 34
Network
Setup (cont.)
Network Scale Normal
Small
When
Normal
is selected, the network can work
effectively even when it is connected to a HUB that
has a spanning tree feature. However, printer start
up time gets longer when computers are
connected with two or three small LANs.
When
Small
is selected, computers can cover
from two or three small LANs to a large LAN, but
may not work effectively when the network is
connected to a HUB with a spanning tree feature.
Gigabit Network Enable
Disable
Sets whether to support a gigabit network.
When it is disabled, 1000Base-T Full/Half
duplex connection cannot be made.
Hub Link Setting Auto Negotiate
100Base-TX Full
100Base-TX Half
10Base-T Full
10Base-T Half
Sets a method to link to a HUB. When Auto is
set, a connection method to a HUB is selected
automatically and attempts to connect.
If another method is selected, attempts to connect
to a HUB only by the selected connection method.
Network Factory
Defaults
Execute Specifies whether to initialize the network
factory default settings for the Network.
USB Setup USB Enable / Disable Enables / Disables the USB port.
Speed 480 / 12 Mbps Selects the interface speed. After setting
change the menu, the printer restarts on exit.
Soft Reset Enable / Disable
Enables or disables the
Soft Reset
command.
Serial Number Enable / Disable Specifies whether to Enable or Disable a
USB serial number.
The USB serial number is used to identify the
USB device connected to your PC.
Offline Receive Enable / Disable Offline receive.
USB Memory Interface Enable / Disable Sets able/disable of USB memory I/F.
Connected Host Normal
Specific
If the printer is connected to a specific host
by USB, set it to Specific to print from this
specific host.
Print Setup Personality Auto
PostScript
PCL
XPS
IBM PPR
EPSON FX
Selects a printer language.
Copies 1- 999 Selects the number of copies.
This setting is disabled for Local Print except
for Demo Page.
Duplex On/Off Specifies duplex print (option) if a duplex
unit is installed and enabled
Binding Long Edge
Short Edge
Specifies Binding in duplex printing.
Display Conditions: A duplex unit is installed
and enabled.
Refer to Duplex” on page 34.
Media Check Enable
Disable
Sets whether the printer checks the matching
of printed data size and that of the tray. Only
standard sizes are checked.
ITEM SETTINGS EXPLANATION
34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Oki C612 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Oki C612

Oki C612 Bedienungsanleitung - Deutsch - 99 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info