Bedienungsanleitung Oki C822n (Seite 10 von 124) (Englisch)

536474

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

- 10 -

1. Convenient Print Functions

11 Congure the paper size and tray on the

printer driver.

For Windows

1 From the [File] menu, select [Print].

2 Click [Preferences] or [Properties].

3 On the [Setup] tab, select [A4] or

[Letter] from [Size].

4 Select [Multipurpose Tray] from

[Source].

5 Congure other settings if necessary and

then start printing.

For Mac OS X

1 From the [File] menu, select [Page

Setup].

2 Select [A4] or [Letter] from [Paper

Size].

3 Select [Print] from [File] menu.

4 For Mac OS X 10.3.9, select [Printer

Features] from the panel menu.

5 Select [Setup] from the panel menu.

6 Select [Multipurpose Tray] from

[Paper Source].

7 Congure other settings if necessary and

then start printing.

Memo

● If the print dialog does not contain the options you expect

to see on Mac OS X 10.7, click the [Show Details] button

on the bottom of the [Printer] menu.

● If the print dialog contains only two menu items and

does not contain the options you expect to see on Mac

OS X 10.5 to 10.6, click the button on the side of the

[Printer] menu.

Printing on Custom Size Paper

You can register a customized paper size on the

printer driver so you can print on nonstandard

paper such as banners.

● Settable custom size range

Width: 64 to 297 mm

Length: 90 to 1320.8 mm

Paper sizes that can be fed differ depending on

the tray.

Note

● Register the paper size as portrait, and load paper in

portrait orientation.

● For banner media that is over 432 mm long, use the

faceup stacker.

● This function may not be available in some applications.

● If paper length exceeds 432 mm, we do not guarantee

print quality.

● If paper is so long that it exceeds the paper supports of

the MP tray, support it by hand.

● When using tray 1 or tray 2, select the <ENTER>

button on the operator panel>[Menus]>[Tray

Conguration]>[Using Tray Cong]> [Paper

Size]>[Custom] before doing the following procedure.

● If images are not correctly printed on large size paper,

selecting [Standard (600x600dpi)] for [Print Quality],

image in the PS printer driver may allow for correct

printing.

● Use of paper with a width of less than 100 mm is not

recommended. Doing so may cause paper jams.

Reference

● For details on the paper sizes that can be fed on each tray

or used for duplex printing, refer to the User’s Manual

(Setup).

● The [Auto Tray Change] is enabled by default. When

the tray runs out of paper during printing, the printer

automatically begins feeding paper from that tray. If you

want to feed custom paper only from a particular tray,

disable auto tray switching. For auto tray change, refer to

“Auto Tray Switching” P.21.

 Specifying Custom Sizes

To load custom size paper, you need to register

the width and length of the paper before

printing. The range of the sizes you can set

differs according to the paper tray.

Tray Available size range

Tray1 Width:

105 to 297 mm (4.1 to 11.7 inches)

Length:

148 to 431 mm (5.8 to 17.0 inches)

Tray2

(Option)

Width:

148 to 297 mm (5.8 to 11.7 inches)

Length:

182 to 431 mm (7.2 to 17.0 inches)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oki C822n Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oki C822n

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info