665206
89
Zoom out
Zoom in
Vorherige Seite
1/139
Nächste Seite
- 89 -
Other Error Messages
3
3. Troubleshooting
Error
code
Message
<ATTENTION>
indicator
Cause/Remedy
Unsupported USB Device Detected
Please detach it
Lights up A USB device unsupported by a printer is
connected. Remove the device.
Install Paper
MPTray
%MEDIA_SIZE%
Press ONLINE Button
Blinks Printing from the MP tray was specied.
Load the paper of the size indicated in the
MP tray, and then press the <ON LINE>
button.
%COLOR% Waste Toner Full.Replace Toner. Lights up Waste toner is full. Replace with a new toner
cartridge of the indicated color.
Collate Fail:Too Many Pages
Press ONLINE Button
Lights up A collate print error has occurred.
Reduce the data amount. If that does not
work, reduce the size of the print data.
File System Operation failed<nnn>
Press ONLINE Button
Lights up An error of le system for a printer has
occurred.
Power Off and Wait for a while
126:Condensing Error
Blinks A condensation has occurred inside a printer.
Turn the printer off and turn on again after
a while.
Invalid Secure Data
Press ONLINE Button
Lights up Invalid source data is received in an
authentication printing and deleted.
USB Hub Unsupported
Please detach it
Lights up A USB hub unsupported by a printer is
connected. Remove the hub.
Log Buffer is Full. Job Rejected
Press ONLINE Button
Lights up Print data is deleted because the accounting
log buffer is full. Contact a printer
administrator and remove the log buffer.
360 Install Duplex Unit
Please see HELP for details
Blinks A duplex unit is not installed correctly.
Install a duplex unit in a printer correctly.
When a duplex unit is already installed, pull
out the unit, and then install it again.
nnn* Service Call
nnn: Error
Blinks An error occurred inside the printer. Turn the
printer off and then on again.
nnn* Power Off/On
nnn:Error
PC:nnnnnnnn
LR:nnnnnnnn
FR:nnnnnnnn
Blinks A fatal error has occurred in a printer.
Write down the indicated alphanumerical
characters and contact your dealer.
709 Caution, unknown Consumable detected
Go to User Manual “Trouble Shooting” to
restore operation
Blinks You can use any consumables in your
product, but you must accept the risks of
using non-genuine consumables. If the use
of non-genuine consumables causes damage
to the product or results in your product
not functioning to its full specication, then
such damage or effect on the product is not
covered by warranty. To accept these risks
and to restore function;
1. Turn off your product
2. Press and hold the CLEAR button and
turn your product on
3.
After start up, release the CLEAR button
Note
This operation will be recorded for future
reference.
89

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Oki C823dn wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Oki C823dn

Oki C823dn Bedienungsanleitung - Deutsch - 151 seiten

Oki C823dn Bedienungsanleitung - Holländisch - 148 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info