Bedienungsanleitung Oki C823n (Seite 20 von 139) (Englisch)

665204

Zoom out

Zoom in

Vorherige Seite

1/139

Nächste Seite

- 20 -

Preparing Your Printer

1. Setup

5 Load paper with the print side face down

and press it from above.

Note

● Do not load paper exceeding the [ ] mark (5) of the

paper guide.

6 Secure the loaded paper with the paper

guide.

7 Check if a size of loaded paper matches

the setting of paper size dial.

8 Return the paper tray to the printer.

Memo

● If loading a paper that you cannot select the

size with a paper size dial options, set the dial to

[Other], and then set a paper size on the operator

panel.

Turning On/Off the Power

Power Supply Conditions

The power supply must meet the following

conditions:

Voltage: 110 - 127 VAC (Range 99 - 140 VAC)

220 - 240 VAC (Range 198 - 264 VAC)

Frequency: 50/60 Hz ± 2%

Note

● If the power supply is unstable, use a voltage regulator.

● The maximum power consumption of this printer is

1400 W. Ensure that the power supply is sufcient to

operate this printer.

● We do not guarantee operation where an uninterruptible

power system (UPS) or inverter is used. Do not use an

uninterruptible power system (UPS) or inverter.

WARNING

There is a risk of getting

an electric shock and/or

causing re.

● Be sure to turn off the power supply switch when

attaching or removing the AC cable and earth wire.

● Be sure to connect an earth wire to the grounding

terminal of exclusive use.

● Please do not connect with the ground of a water pipe,

a gas pipe, and a telephone wire, and a lightning rod by

any means.

● Make sure to connect with the ground terminal before

connecting the power cord to the power supply plug.

● Be sure to plug in and unplug the AC cable while holding

on to the power supply plug.

● Insert the AC cable plug completely into the wall socket

securely.

● Do not touch the power cord, or printer, if your hands

are wet.

● Install a power cord in the place which is not stepped

on, and do not place a thing on a power cord.

● Do not use the cord tied in a bundle.

● Please do not use the damaged power cord.

● Do not use multi-outlet adapters.

● Do not connect this printer and other electric products

to the same wall socket. If it connects simultaneously

with an air conditioner, copier, shredder, etc. Especially,

a printer may incorrect-operate by the electric

noise. When you connect with the same wall socket

unavoidably, please use a commercial noise lter or a

commercial noise cut transformer.

● Use the attached power cord and insert it directory with

the ground terminal. Do not use the power cord for

other product for the printer.

● Do not use an extension cord. When you use it

unavoidably, use the thing more than rated 15 A.

● Use of an extended code may not operate a printer

normally by AC voltage descent.

● During printing, do not shut off a power supply or do not

pull out a power supply plug.

● When you use it neither for consecutive holidays nor a

travel for a long time, pull out a power cord.

● Do not use attached power cord to the other products.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oki C823n Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oki C823n

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info