Bedienungsanleitung Oki C823n (Seite 33 von 139) (Englisch)

665204

Zoom out

Zoom in

Vorherige Seite

1/139

Nächste Seite

- 33 -

Connecting to a Computer

1. Setup

1 Conrm the position of the easy setup

button and when to press the button

by referring to the user manual of the

wireless LAN access point.

2 Conrm that the wireless LAN access

point has been activated and is

functioning normally.

3 Turn on the printer.

4 Press the scroll button several times

to select [Wireless(Infrastructure)

Setting], and then press the <ENTER>

button.

5 Enter the administrator password, and

press the <ENTER> button.

The factory default password is “999999”.

6 Press the scroll button several times

to select [Automatic setup (WPS)],

and then press the <ENTER> button.

7 Select [WPS-PBC], and then press the

<ENTER> button.

8 Select [Yes], and then press the

<ENTER> button.

9 The Printer starts searching for wireless

LAN access points. During 2 minutes,

press the easy setup button for the

wireless LAN access point for a few

seconds.

Once Connection successful is displayed,

it indicates that the wireless LAN setup has

completed.

If Connection failed is displayed, repeat the

procedure from step 4.

If an antenna appears on the upper right corner

of the operator panel, it indicates that the

connection is successful.

 Connecting by Selecting a Wireless

LAN Access Point from the Control

Panel

If the wireless LAN access point does not support

WPS, you can connect by selecting the wireless

LAN access point you want to use from those the

machine has detected. To do this, an encryption

key is required.

1 Conrm and write down the SSID and

encryption key by referring to the user

manual of the wireless LAN access point.

Memo

● The SSID is also called the network name, ESSID, or

ESS-ID.

● The encryption key is also called the network key,

security key, password, or pre-shared key.

2 Conrm that the wireless LAN access

point has been activated and is

functioning normally.

3 Turn on the printer.

4 Press the scroll button several times

to select [Wireless(Infrastructure)

Setting], and then press the <ENTER>

button.

5 Enter the administrator password, and

press the <ENTER> button.

The factory default password is “999999”.

6 Press the scroll button several times to

select [Wireless Network Selection],

and then press the <ENTER> button.

7 The printer starts searching for wireless

LAN access points. Please wait.

8 A list of available wireless LAN access

point SSIDs are displayed. Press or ,

select a wireless LAN access point, and

press the <ENTER> button.

Note

● If only [Manual Setup] is displayed or the desired

wireless LAN network SSID is not displayed, follow

the procedure in “Connecting by Manual Setup from

Control Panel” to do the settings.

9 A screen opens in which to input the

encryption key appropriate to the

encryption procedure for the selected

wireless LAN access point; input the

encryption key.

Memo

● The encryption key differs depending on the wireless

LAN access point and security.

 If [WPA Pre-shared Key] is displayed

Item Explanation

Encryption

method

WPA/WPA2-PSK

Encryption key Enter the pre-shared key.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oki C823n Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oki C823n

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info