Bedienungsanleitung Oki C833dn (Seite 34 von 139) (Englisch)

665208

Zoom out

Zoom in

Vorherige Seite

1/139

Nächste Seite

- 34 -

Connecting to a Computer

1. Setup

 If [WEP Key] is displayed

Item Explanation

Encryption

method

WEP

Encryption key Input the WEP key.

 Other settings

Item Explanation

Encryption

method

Disable

Encryption key Input is not necessary.

10 The SSID selected in step 7 and

the encryption method in step 8

are displayed as security in of the

conrmation screen. If the SSID is

the same as the one set up in step

select [ENTER]:Execute and press the

<ENTER> button.

Once Connection successful is displayed,

it indicates that the wireless LAN setup has

completed.

If Connection failed is displayed, repeat the

procedure from step 4.

If an antenna appears on the upper right corner

of the operator panel, it indicates that the

connection is successful.

 Connecting by Manual Setup from

Control Panel

Congure the wireless LAN access point

information (SSID, encryption method, and

encryption key) manually, and connect to the

wireless LAN.

1 Check and write down the SSID, the

encryption method and the encryption

key by referring to the user manual of

the wireless LAN access point.

Note

● When the encryption method is WPA-EAP or WPA2-

EAP, congure from the printer’s web page.

Memo

● The SSID is also called the network name, ESSID, or

ESS-ID.

● The encryption key is also called the network key,

security key, password, or pre-shared key.

2 Conrm that the wireless LAN access

point has been activated and is

functioning normally.

3 Turn on the printer.

4 Press the scroll button several times

to select [Wireless(Infrastructure)

Setting], and then press the <ENTER>

button.

Enter the administrator password,and

press the <ENTER> button.

The factory default password is “999999”.

6 Press the scroll button several times to

select [Wireless Network Selection],

and then press the <ENTER> button.

7 The printer starts searching for wireless

LAN access points. Please wait.

8 A list of available wireless LAN access

point SSIDs are displayed. Press or ,

select [Manual Setup] at the end of the

list, and press the <ENTER> button.

9 Input the SSID recorded in step 1, and

press the <ENTER> button.

Note

● It is case sensitive. Please enter it correctly.

10 Select the encryption method conrmed

in step 1, and press the <ENTER>

button.

Memo

● The encryption key differs depending on the wireless

LAN access point and security.

11 Input the encryption key recorded in

step 1, and press the <ENTER> button.

12 Press the <ENTER> button.

Once Connection successful is displayed,

it indicates that the wireless LAN setup has

completed.

If Connection failed is displayed, repeat the

procedure from step 4.

If an antenna appears on the upper right corner

of the operator panel, it indicates that the

connection is successful.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oki C833dn Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oki C833dn

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info