665210
20
Zoom out
Zoom in
Vorherige Seite
1/139
Nächste Seite
- 1 -
C813n
C823n/C823dn
C833n/C833dn
C843n/C843dn
ES8433
ES8443
- 2 -
About the Product Warranty
Every effort has been made to ensure that the information in this document is complete, accurate,
and up-to-date. The manufacturer assumes no responsibility for the results of errors beyond its
control. The manufacturer also cannot guarantee that changes in software and equipment made by
other manufacturers and referred to in this guide will not affect the applicability of the information
in it. Mention of software products manufactured by other companies does not necessarily constitute
endorsement by the manufacturer.
While all reasonable efforts have been made to make this document as accurate and helpful as
possible, we make no warranty of any kind, expressed or implied, as to the accuracy or completeness
of the information contained herein.
All rights are reserved by Oki Data Corporation. You must not copy, transfer, translate, etc. the content
herein without authorization. You must obtain written permission from Oki Data Corporation before
doing any of the above.
© 2016 Oki Data Corporation
OKI is a registered trademark of Oki Electric Industry Co., Ltd.
Energy Star is a trademark of the United States Environmental Protection Agency.
Microsoft, Windows, Windows Server and Windows Vista are registered trademarks of Microsoft
Corporation.
Apple, Mac and OS X are registered trademarks of Apple Inc.
Other product names and brand names are registered trademarks or trademarks of their proprietors.
As an Energy Star Program Participant, the manufacturer has determined that this product
meets the Energy Star guidelines for energy efciency.
This product complies with the requirements of the Council Directives 2014/30/EU (EMC), 2014/35/
EU (LVD), 1999/5/EC (R&TTE), 2009/125/EC (ErP) and 2011/65/EU (RoHS), as amended where
applicable, on the approximation of the laws of the member states relating to Electromagnetic
Compatibility, Low Voltage, Radio & Telecommunications Terminal Equipment, Energy related
Products and Restriction on the use of certain Hazardous Substances in electrical and electronic
equipment.
The following cables were used to evaluate this product to achieve EMC directive
2014/30/EU compliance and congurations other than this may affect that compliance.
cable type
length
(meters)
core shield
Power 1.8
USB 5.0
LAN 15.0
- 3 -
Emergency rst aid
Take care with toner powder:
If swallowed, give small amounts of cold water and seek medical attention. DO
NOT attempt to induce vomiting.
If inhaled, move the person to an open area for fresh air. Seek medical attention.
If it gets into the eyes, ush with large amounts of water for at least 15 minutes
keeping eyelids open. Seek medical attention.
Spillages should be treated with cold water and soap to help reduce risk of
staining skin or clothing.
Manufacturer
Oki Data Corporation,
4-11-22 Shibaura, Minato-ku,
Tokyo 108-8551,
Japan
Importer to the EU/Authorized representative
OKI Europe Limited
Blays House
Wick Road
Egham
Surrey, TW20 0HJ
United Kingdom
For all sales, support and general enquiries contact your local distributor.
Environmental information
w
w
w
.
o
k
i
.
c
o
m
/
p
r
i
n
t
i
n
g
/
- 4 -
For Your Safety
Read the User’s Manual for your safety before using the product.
Cautions related to safety
WARNING
A warning provides additional information which, if ignored, may result in a risk of personal
injury.
CAUTION
A caution provides additional information which, if ignored, may result in equipment
malfunction or damage.
General cautions
WARNING
Do not touch the safety
switch inside the printer.
Doing so may cause electric
shock when high voltage
occurs. In addition, the
rotating gears may result in
injury.
Do not use highly ammable
sprays near the printer. Doing
so may cause re as parts of
the printer are hot.
Unplug the power cord
and contact a customer
service center if the cover
is unusually hot, smoking,
giving off an unusual odor,
or making strange noises.
Failure to do so may lead to
a re.
Unplug the power cord and
contact a customer service
center if a liquid such as
water enters in the internal
parts of the printer.
Failure to do so may lead to
a re.
Unplug the power cord and
remove foreign materials
such as paper clips if they
fall inside the printer. Failure
to do so may cause electric
shock and/or re, leading to
injuries.
Do not operate and/or
disassemble the printer other
than as directed in User’s
Manual. Doing so may cause
electric shock and/or re,
leading to injuries.
Unplug the power cord
and contact a customer
service center if the printer
is dropped or the cover is
damaged.
Failure to do so may cause
electric shock and/or re,
leading to injuries.
Unplug the power cord
periodically to clean plug
blades and base section
between the blades.
If the power plug remains
inserted for a long time, the
base section will get dusty,
and the plug may short
circuit, which may cause re.
Do not clean spilled toner
with a vacuum cleaner.
If cleaning spilled toner with
a vacuum cleaner, it may
catch re due to the sparks
from electric contact.
Toner spilled on the oor
should be wiped off with wet
cloth.
Do not insert materials in a
vent hole.
Doing so may cause electric
shock and/or re leading to
personal injuries.
Do not put a cup with liquids
such as water on the printer.
Doing so may cause electric
shock and/or re leading to
personal injuries.
Do not touch the fuser and
other parts when opening the
cover of the printer.
Doing so may cause burns.
Do not throw toner cartridges
and image drum cartridges
into re. Doing so may cause
dust explosion leading to
burns.
Do not use a power cord, a
cable, or a ground wire other
than those that are indicated
in User's Manual.
Doing so may cause re.
The operation of using UPS
(uninterruptible power
source) or inverters is not
guaranteed. Do not use
uninterruptible power source
or inverters.
Doing so may cause re.
CAUTION
Do not come closer to the paper’s exit area
when the power is turned on, while printing.
Doing so may result in personal injury.
Do not touch a damaged liquid-crystal display.
If liquid (liquid crystal) leaked from the liquid-
crystal display gets into the eyes or mouth, ush
with large amount of water. Follow the direction
from a doctor if necessary.
- 5 -
Manual Composition
The following manuals are included with this product.
User’s Manual (Setup) ---- This document
Basic operations are described to aid understanding of this printer. The initial setup descriptions
including printer placement and the network initial setting are noted along with troubleshooting and
maintenance procedures.
About This Manual
Terms in this document
The following terms are used in this manual.
Note
Indicates important information on operations. Make sure to read sections with this mark.
Memo
Indicates additional information on operations. You should read sections with this mark.
Reference
Indicates where to look when you want to know more detailed or related information.
WARNING
A warning provides additional information which, if ignored, may result in a risk of personal injury.
CAUTION
A caution provides additional information which, if ignored, may result in equipment malfunction or
damage.
Symbols in this document
The following symbols are used in this manual.
Symbols Description
[ ] Indicates menu names on the display screen.
Indicates menu, window, and dialog names on the computer.
" " Indicates messages and input text on the display screen.
Indicates le names on the computer.
Indicates reference titles.
< > button/key Indicates a hardware button on the operator panel or a key on the keyboard of the
computer.
> Indicates how to get to the item you want in the menu of this printer or the computer.
Your Printer
Indicates a printer you want to use or select.
- 6 -
Notation used in this manual
The following notations may be used in this manual.
C813n C813
C823n/C823dn C823
C833n/C833dnC833
C843n/C843dnC843
PostScript3 Emulation PSE, POSTSCRIPT3 Emulation, POSTSCRIPT3 EMULATION
Microsoft
®
Windows
®
10 64-bit Edition operating system Windows 10 (64bit version) *
Microsoft
®
Windows
®
8.1 64-bit Edition operating system Windows 8.1 (64bit version) *
Microsoft
®
Windows
®
8 64-bit Edition operating system Windows 8 (64bit version) *
Microsoft
®
Windows
®
7 64-bit Edition operating system Windows 7 (64bit version) *
Microsoft
®
Windows Vista
®
64-bit Edition operating system Windows Vista (64bit version) *
Microsoft
®
Windows Server
®
2012 R2 64-bit Edition operating system Windows Server 2012 *
Microsoft
®
Windows Server
®
2012 64-bit Edition operating system Windows Server 2012 *
Microsoft
®
Windows Server
®
2008 R2 64-bit Edition operating system Windows Server 2008 *
Microsoft
®
Windows Server
®
2008 64-bit Edition operating system Windows Server 2008 (64bit version) *
Microsoft
®
Windows
®
10 operating system Windows 10 *
Microsoft
®
Windows
®
8.1 operating system Windows 8.1 *
Microsoft
®
Windows
®
8 operating system Windows 8 *
Microsoft
®
Windows
®
7 operating system Windows 7 *
Microsoft
®
Windows Vista
®
operating system Windows Vista *
Microsoft
®
Windows Server
®
2008 operating system Windows Server 2008 *
Generic name for Windows 10, Windows 8.1, Windows 8, Windows Server 2012, Windows 7, Windows Vista, and
Windows Server 2008 Windows
* If there is no special description, 64bit version is included in Windows 10, Windows 8.1, Windows 8, Windows 7,
Windows Vista, and Windows Server 2008. (64bit version and Windows Server 2008 R2 is included in Windows
Server 2008, Windows Server 2012 R2 is included in Windows Server 2012.)
If there is no special description, Windows 7 is used as Windows, Mac OS X 10.11 is used as Mac OS X, and
C833dn is used as the printer for examples in this document.
Depending on your OS, model or version, the description on this document may be different.
The diffusion of dust, ozone, styrene, benzene, TVOC, and ultrane particles conforms to the Eco Mark
155, “Printer” substance emission certication criteria. (Toner was tested by performing black and
white and color printing with Oki Data genuine toner cartridges according to the appendix S-M of the
Blue Angel RAL UZ-171:2012 test method.)
- 7 -
Contents
About the Product Warranty .....................................................................2
Emergency rst aid .................................................................................3
Manufacturer ..........................................................................................3
Importer to the EU/Authorized representative .............................................3
Environmental information .......................................................................3
For Your Safety .......................................................................................4
Manual Composition ................................................................................5
About This Manual ...................................................................................5
1. Setup ................................................................................. 10
Checking Products .................................................................................11
Checking Package Contents ...................................................................................... 11
Operator Panel .....................................................................................12
How to Use the Ten-Key Pad ..................................................................................... 12
How to Use the Function Key .................................................................................... 13
Names of Components ............................................................................................. 14
Available Options .................................................................................................... 15
Checking the Placement Environment ...................................................... 16
Placement Environment ........................................................................................... 16
Placement Space .................................................................................................... 16
Preparing Your Printer ............................................................................17
Unpacking ............................................................................................................. 17
Installing Consumables ............................................................................................ 17
Loading Paper ........................................................................................................ 19
Turning On/Off the Power ......................................................................................... 20
Installing Options .................................................................................................... 23
Test Printing from the Printer .................................................................................... 30
Connecting to a Computer ......................................................................31
Network Connection ................................................................................................ 32
Connecting in Wireless LAN (AP Mode) (Optional) ........................................................ 41
USB Connection ...................................................................................................... 42
When Adding Options .............................................................................................. 46
- 8 -
Contents
2. Printing Basic Operation .................................................... 48
Supported Paper ...................................................................................48
How to Print from the Tray .....................................................................53
How to Print from the MP Tray ................................................................54
Printing in Custom Sizes ........................................................................58
Paper Output ........................................................................................62
Convenient Print Functions .....................................................................63
Canceling Printing .................................................................................64
Setting the Time that Elapses Before Entering the Power Save Mode ............65
Setting the Time that Elapses Before Entering the Deep Sleep Mode ............66
Constraints When in Deep Sleep Mode ....................................................................... 67
Settings for Turning Power Off Automatically (Auto Power Off) .................... 69
Setting the Auto Power Off ....................................................................................... 69
Setting the Time that Elapses Before Entering the Auto Power Off Mode ......................... 70
Setting the Buzzer ................................................................................71
3. Troubleshooting ................................................................. 72
When an Error Message Appears on the Display Screen
(When the ATTENTION Indicator Lights Up/Blinks) .....................................72
When Paper Jams Occurs/When an Error Message does not
Disappear Even After Jammed Paper is Removed .......................................73
When the Message for Replacement of Consumables or
Maintenance Unit Appears ......................................................................83
When the Message for Paper Replacement or Paper Size Error Appears ........ 86
Other Error Messages ............................................................................87
When You Cannot Print from the MP Tray ..................................................90
Other Issues ........................................................................................91
Unable to Print from a Computer ............................................................................... 91
Unable to Install a Printer Driver Successfully ............................................................. 93
OS-Specic Constraints .......................................................................................... 94
Image Quality Issues .............................................................................................. 95
Feeding Issues ....................................................................................................... 98
Machine Issues ....................................................................................................... 99
- 9 -
Contents
4. Maintenance .................................................................... 101
Replacing Consumables and Maintenance Units ....................................... 101
Replacing Toner Cartridges ......................................................................................102
Replacing the Image Drum ......................................................................................106
Replacing the Belt Unit ...........................................................................................109
Replacing the Fuser Unit .........................................................................................112
Cleaning ............................................................................................ 114
Cleaning the Surface of the Printer ...........................................................................114
Cleaning Paper Feed Rollers.....................................................................................114
Cleaning LED Heads ...............................................................................................116
Moving or Transporting Your Printer ....................................................... 118
Before Machine Disposal ...................................................................... 121
5. Appendix ......................................................................... 122
Menu List of the Operator Panel ............................................................ 122
Checking the Printer’s Status with the Display Screen .................................................122
Menu List of the Operator Panel ...............................................................................123
Specications ..................................................................................... 130
Index .................................................................................... 136
Oki contact details ................................................................. 137
- 10 -
1
1. Setup
1. Setup
How to set up is explained in this chapter.
Setup Flow
1. Checking Products
Checking package contents
Checking names of the operator panel and how to
operate
Checking names of product parts
Checking options
2. Checking the Placement Environment
Checking the placement environment
Checking placement location
3. Preparing a Printer
Unpacking
Removing cushioning materials
Installing consumables
Loading paper
Turning on/off the power
Installing options
Test printing from the printer
4. Connecting to a Computer
Connecting through network Connecting through USB
For Windows
For Macintosh
For Windows For Macintosh
Connecting through Bonjour
Specifying an IP address
on the operator panel
Connecting to a computer
Installing a printer driver on a computer
Adding printers on a computer
Adding printers on a
computer
Test printing from a computer
- 11 -
Checking Products
1
1. Setup
Checking Products
This section gives an overview of the printer.
Checking Package Contents
Check that you have everything shown below.
CAUTION
It may cause injury!
At least two people are needed to lift the printer
safely because it weighs about 37 Kg or 40 Kg.
Reference
For details on how to open the package, refer to
“Unpacking” P.17.
Printer
Four image drums (black, yellow, magenta
and cyan)
Four starter toner cartridges (black, yellow,
magenta and cyan)
Note
For the C models, the starter toner cartridges are
installed in the image drums, which are installed in
the machine before shipment.
The starter toner cartridge is not installed in the ES
models. Install the toner cartridge that is included in
this machine. Refer to “Replacing the Image Drum”
P.106.
Quick Guide
Software DVD-ROM
AC cord
Note
An Ethernet cable and USB cable are not supplied with
your printer. Procure them separately.
Packaging and cushioning material are needed if
transporting the printer. Do not throw them away.
- 12 -
Operator Panel
1
1. Setup
Operator Panel
This section explains the names and functions of components on the operator panel and how to enter
text.
1
3
4
5
5
6
7
8
12
13
10
11
9
2
No. Name Function
1 Display screen Displays operating instructions and the status of the printer.
2 <ON LINE> button Switches between on line and off line modes.
3 <CANCEL> button Cancels the current print immediately.
4 <ENTER> button Displays the menu screen.
Conrms the highlighted item.
5 <SCROLL> button Selects the menu or scrolls the screen.
6 <BACK> button Returns to the previous screen.
7 <HELP> button Displays the help screen. To close, press the <HELP> button, <BACK>
button, or <CANCEL> button.
8 <POWER SAVE> button Enters or exits the power saving mode.
Exits the deep sleep mode.
Lights up green in the power save mode and blinks green in the deep sleep mode.
9 Ten-key pad Enters numbers.
Enters alphabetical characters and symbols.
A password can be entered only with a ten-key pad.
10 <Fn> key Displays the equipment setting menu screen with a shortcut function.
11 <CLEAR> key Executes the following actions according to the entered items when pressed
or held down.
Minimizes a setting value.
Enters zero for a setting value.
Deletes a character.
Cancels a selected item.
Returns to the previous settings. Not available when entering an IP address.
12 <READY> indicator Lights up green in on line mode and turns off in off line mode.
13 <ATTENTION> indicator Lights up or blinks orange when an error occurs in the device.
How to Use the Ten-Key Pad
Use to enter numbers and characters.
Each time a numeric key is pressed, entered
numbers or characters are changed cyclically in
the following order:
<1>: 1
<2>: 2
a b c A B C 2
<3>: 3
d e f D E F 3
<4>: 4
g h i G H I 4
<5>: 5
j k l J K L 5
<6>: 6
m n o M N O 6
<7>: 7
p q r s P Q R S 7
<8>: 8
t u v T U V 8
<9>: 9
w x y z W X Y Z 9
The functions of <
> and <C> keys are the
followings:
<
>: Function key (Available only when the
standby screen is displayed.)
<C>: Deletes a character when entering a
password.
To enter “abc” for example,
press <2>
<2> <ENTER> button <2>
<2> <2> <ENTER> button <2>
<2> <2> <2> <ENTER> button.
- 13 -
Operator Panel
1
1. Setup
How to Use the Function Key
Press numeric keys after pressing the <Fn>
key when the message “Ready To Print
appears on the display screen. The function
menu corresponding to the number entered is
displayed.
1 Press the <Fn> key.
2 Press the numeric keys (0-9) to display
the desired function item and press the
<ENTER> button.
3 The setting screen of the selected
function is displayed. Check or change
the settings.
Function Menu List
Function No. Function menu
1 Shared Print
2 Private Print
10 Paper Size (Tray 1)
11 X Dimension (Tray 1)
12 Y Dimension (Tray 1)
13 Media Type (Tray 1)
14 Media Weight (Tray 1)
20 Paper Size (Tray 2)
21 X Dimension (Tray 2)
22 Y Dimension (Tray 2)
23 Media Type (Tray 2)
24 Media Weight (Tray 2)
30 Paper Size (Tray 3)
31 X Dimension (Tray 3)
32 Y Dimension (Tray 3)
Function No. Function menu
33 Media Type (Tray 3)
34 Media Weight (Tray 3)
40 Paper Size (Tray 4)
41 X Dimension (Tray 4)
42 Y Dimension (Tray 4)
43 Media Type (Tray 4)
44 Media Weight (Tray 4)
80 Paper Feed
90 Paper Size (MP Tray)
91 X Dimension (MP Tray)
92 Y Dimension (MP Tray)
93 Media Type (MP Tray)
94 Media Weight (MP Tray)
95 Tray Usage (MP Tray)
100 Conguration
101 Network
102 Usage Report
103 Error Log
200 Power Save Time
201 Sleep Time
202 Auto Power Off Time
210 Error Report
220 Print Position Adjust (MPTray)
221 Print Position Adjust (Tray 1)
222 Print Position Adjust (Tray 2)
222 Print Position Adjust (Tray 3)
223 Print Position Adjust (Tray 4)
230 Paper Black Setting
231 Paper Color Setting
232 Trans. Black Setting
233 Trans. Color Setting
234 SMR Setting
235 BG Setting
236 Drum Cleaning
237 Hex Dump
300 Adjust Density
301 Adjust Registration
302 Print Color Tuning Pattern
310 Cyan Density
311 Magenta Density
312 Yellow Density
313 Black Density
- 14 -
Operator Panel
1
1. Setup
Names of Components
1
2
3
4
5
6
7
8
8
No. Name
1 Front cover
2 Front cover open lever
3 Operator panel
4 Power switch
5 Output tray
6 Multipurpose tray
7 Tray 1
8 Air vents
9
10
11
12
13
14
15
No. Name
9 Output tray open button
10 Toner cartridge
Image drum (K: black)
11 Toner cartridge
Image drum (Y: yellow)
12 Toner cartridge
Image drum (M: magenta)
13 Toner cartridge
Image drum (C: cyan)
14 Fuser unit
15 LED head (four heads)
Note
In the case of the ES models, toner cartridges are not
installed in the Image drums.
16
17
26
No. Name
16 Multipurpose tray
17 Paper set cover
26 Wireless LAN module cover
18
22
19
20
21
No. Name
18 Rear output tray
19 AC power socket
20 Interface part
21 Access cover
22 Duplex unit (Only for the model of the name
with dn or ES)
Interface part
23
24
25
No. Name
23 Accessory connector
24 USB interface connection
25 Network interface connection
- 15 -
Operator Panel
1
1. Setup
Available Options
The following options are available for your
printer:
Additional tray unit (tray 2/3/4)
Additional RAM (256 MB or 512 MB)
16 GB SD memory card kit
Wireless LAN module
Reference
For details on how to install the options, refer to
“Installing Options” P.23.
An SD memory card kit is used for functions such as a
storage for spooling when copying sectors, saving secure
print/encrypted print data, and as a storage destination
for form data. For information on secure print, encrypted
secure print and form data storage functions, please refer
to the User’s Manual (Advanced).
Note
C813/C823 is available only Tray2.
- 16 -
Checking the Placement Environment
1
1. Setup
Checking the Placement Environment
Placement Environment
Your printer must be placed in the following
environment:
Temperature: 10 - 32°C
Humidity:
20%
- 80% RH
(relative humidity)
Maximum
wet bulb
temperature:
25°C
Recommended
environment:
17 - 27°C, 50 - 70 % RH
Note
Be careful of condensation. It may cause a malfunction.
If placing your printer in a location where the humidity of
the surrounding air is less than 30% RH, use a humidier
or antistatic mat.
WARNING
Do not install near high temperature or the re.
Please do not install in a place from which a
chemical reaction is started (laboratory etc.).
Do not install near the inammable solution, such
as alcohol and thinner.
Do not install in the place which the small child's
hand reaches.
Do not install in an unstable place (the shaky
stand, leaning place, etc.).
Do not install in a place many humidity, dusty and
the place where direct rays hit.
Do not install in the environment of briny air and
corrosive gas.
Do not install in a place with much vibration.
Do not install in a place where the ventilation hole
of the printer is closed.
CAUTION
Do not place directly on a rug or carpet with long
strands.
Do not install in a closed room with poor
ventilation and circulation.
If you use the printer in a small room for a long
time, please make sure that you ventilate the
room.
Install away from strong magnetic elds and
sources of noise.
Install away from monitors or TVs.
Placement Space
Place your printer on a at surface that is wide
enough that the printer’s feet securely on the
surface.
Allow for enough room around your printer as
shown in the images below.
Top view
20 cm
20 cm
100 cm60 cm
Side view
70 cm
- 17 -
Preparing Your Printer
1
1. Setup
Preparing Your Printer
This section explains how to unpack your printer and how to turn it on and off.
Unpacking
CAUTIO
N
It may cause injury!
At least two people are needed to lift the printer
safely because it weighs about 37 Kg or 40 Kg.
Note
Be sure to use the consumables or maintenance units
provided with this printer at rst. Otherwise, the life of the
consumables or maintenance units may not be displayed
correctly, or you may not be able to use them later.
The image drum (the green tube) is very delicate. Handle
it carefully.
Do not expose the image drum to direct sunlight or very
bright interior light (approximately more than 1500 lux).
Even under the normal interior light, do not leave it for
more than 5 minutes.
Packaging and cushioning material are needed if
transporting the printer. Do not throw them away.
1 Remove your printer from the box and
remove all cushioning materials and the
plastic bag from your printer.
2 Remove the two strips of protective tape
(1) at the back of your printer.
1
Installing Consumables
1 Insert your nger into the recess on
the right side of the printer and pull the
front cover open lever (1) to open the
front cover (2) forward.
Note
Open the front cover gently. If opening rapidly, an MP
tray may open.
1
2
2 Press the output tray open button (3)
and open the output tray (4).
3
4
3 Take out all four image drums from the
printer.
- 18 -
Preparing Your Printer
1
1. Setup
4 Remove the protective sheets from four
image drums.
(1) Place an image drum on a
newspaper. Remove a tape (6) stuck
on a protective sheet (5) and open it.
6
5
(2) Pull out a protective sheet to the
direction of the arrow.
Note
Do not turn the blue lever of the toner cartridge.
5 Put all four image drums back into a
printer.
6 Turn the blue lever (7) of the toner
cartridge backward until its top aligns on
the
mark.
Turn the levers of all four 4 toner cartridges.
7
7 Close the output tray (4) by pushing the
both sides of the cover rmly.
4
8 Close the front cover (2).
Note
The front cover cannot be closed securely if the
output tray is not closed.
When the error message that the top or front cover
is open does not disappear from the operator panel’s
display screen, make sure they are closed securely.
2
- 19 -
Preparing Your Printer
1
1. Setup
Loading Paper
Reference
Please refer to “Supported Paper” P.48 for information
on how to load paper into the printer.
1 Pull out the paper tray (1).
1
2 Set the paper size dial (2) to match the
loading paper size.
Set the dial to [A4 ] when loading the A4 size
paper with a landscape orientation.
2
3 Slide the paper guide (3) and paper
stopper (4) to the size of paper to be
loaded.
3
4
Note
When loading the A6 size paper, move the paper
stopper (4) forward and remove it once, then install
it on the metal part.
4
4 Flex paper back and forth, and then fan
it. Straighten the edges of the paper
stack on a level surface.
- 20 -
Preparing Your Printer
1
1. Setup
5 Load paper with the print side face down
and press it from above.
Note
Do not load paper exceeding the [ ] mark (5) of the
paper guide.
5
6 Secure the loaded paper with the paper
guide.
7 Check if a size of loaded paper matches
the setting of paper size dial.
8 Return the paper tray to the printer.
Memo
If loading a paper that you cannot select the
size with a paper size dial options, set the dial to
[Other], and then set a paper size on the operator
panel.
Turning On/Off the Power
Power Supply Conditions
The power supply must meet the following
conditions:
Voltage: 110 - 127 VAC (Range 99 - 140 VAC)
220 - 240 VAC (Range 198 - 264 VAC)
Frequency: 50/60 Hz ± 2%
Note
If the power supply is unstable, use a voltage regulator.
The maximum power consumption of this printer is
1400 W. Ensure that the power supply is sufcient to
operate this printer.
We do not guarantee operation where an uninterruptible
power system (UPS) or inverter is used. Do not use an
uninterruptible power system (UPS) or inverter.
WARNING
There is a risk of getting
an electric shock and/or
causing re.
Be sure to turn off the power supply switch when
attaching or removing the AC cable and earth wire.
Be sure to connect an earth wire to the grounding
terminal of exclusive use.
Please do not connect with the ground of a water pipe,
a gas pipe, and a telephone wire, and a lightning rod by
any means.
Make sure to connect with the ground terminal before
connecting the power cord to the power supply plug.
Be sure to plug in and unplug the AC cable while holding
on to the power supply plug.
Insert the AC cable plug completely into the wall socket
securely.
Do not touch the power cord, or printer, if your hands
are wet.
Install a power cord in the place which is not stepped
on, and do not place a thing on a power cord.
Do not use the cord tied in a bundle.
Please do not use the damaged power cord.
Do not use multi-outlet adapters.
Do not connect this printer and other electric products
to the same wall socket. If it connects simultaneously
with an air conditioner, copier, shredder, etc. Especially,
a printer may incorrect-operate by the electric
noise. When you connect with the same wall socket
unavoidably, please use a commercial noise lter or a
commercial noise cut transformer.
Use the attached power cord and insert it directory with
the ground terminal. Do not use the power cord for
other product for the printer.
Do not use an extension cord. When you use it
unavoidably, use the thing more than rated 15 A.
Use of an extended code may not operate a printer
normally by AC voltage descent.
During printing, do not shut off a power supply or do not
pull out a power supply plug.
When you use it neither for consecutive holidays nor a
travel for a long time, pull out a power cord.
Do not use attached power cord to the other products.
- 21 -
Preparing Your Printer
1
1. Setup
Turning On the Power
1
Plug the AC cord (1) into the AC power
socket of your printer.
1
2 Plug the AC cord into the electric socket.
3 Hold down the power switch (2) for
about 1 second to turn on the power.
2
The Power switch LED indicator lights up when
the printer turns on.
The message “Ready To Print” is displayed in
the operator panel once printer is ready.
Turning Off the Power
1
Hold down the power switch (1) for
about a second.
The message “Shutting down Please wait.
Printer will turn off automatically” appears
in the operator panel, and the power switch
indicator blinks every 1 second. Then the printer
turns off automatically and the power switch
indicator goes out.
Note
It may take about 5 minutes to turn off the power.
Wait until it turns off.
Holding down the power switch for more than 5
seconds turns off printer forcibly. Only perform
this procedure when a problem occurs. For printer
problems, refer to “Other Issues” P.91.
1
When the Printer is Not Used for a
Long Time
When the printer is not used for a long time due
to consecutive holidays or when on vacation, or
when changing or attaching parts in repair or
maintenance, unplug the AC cord.
Memo
The printer will not be functionally impaired even if left
unplugged for a long time (more than 4 weeks).
- 22 -
Preparing Your Printer
1
1. Setup
Power Save Mode and Deep Sleep Mode
Two-phase power conservation enables you to
save on power consumed by the printer.
Power Save Mode
When your printer is not used for a certain
period of time, it automatically enters the power
save mode to reduce the power consumption.
You can enter the power save mode manually
by pressing the <POWER SAVE> button on the
operator panel.
The <POWER SAVE> button lights up green
while in this mode.
Memo
By factory default, the time interval before entering the
power save mode is set to 1 minute. For how to change
the time that elapses before the printer enters the power
save mode, refer to “Setting the Time that Elapses Before
Entering the Power Save Mode” P.65.
Deep Sleep Mode
Your printer goes from the power save mode to
the deep sleep mode after a set period of time.
The <POWER SAVE> button blinks while in the
deep sleep mode.
Note
The printer does not enter the deep sleep mode if an error
occurs.
Memo
By factory default, the time interval before entering the
deep sleep mode is set to 15 minutes. For how to change
the time that elapses before the printer enters the deep
sleep mode, refer to “Setting the Time that Elapses Before
Entering the Deep Sleep Mode” P.66.
Reference
For more detailed information on deep sleep mode, please
refer to the User’s Manual (Advanced).
Restoring a Printer from the
Power Saving Mode
To restore the printer from the power save
mode or the deep sleep mode, press the
<POWER SAVE> button on the operator panel.
Memo
When the printer receives a print job from a computer or
other devices, it is restored automatically.
Auto Power Off Function
When a certain period of time elapses after
printing, this printer will turn off automatically.
Memo
The factory default setting for time that elapses before the
printer power turns off automatically is 4 hours.
For how to change the time that elapses before the
printer power turns off automatically, refer to “Settings for
Turning Power Off Automatically (Auto Power Off)” P.69.
Note
In the factory default setting, the auto power off mode
is disabled during network connection. To enable the
auto power off mode during network connection, refer to
“Settings for Turning Power Off Automatically (Auto Power
Off)” P.69.
- 23 -
Preparing Your Printer
1
1. Setup
Installing Options
This section explains how to install options on
your printer. The following options are available:
Additional tray unit (Tray 2/3/4)
Additional RAM (256 MB or 512 MB)
16 GB SD memory card kit
Wireless LAN module
Note
Be sure to turn off your printer and unplug the AC cord
and Ethernet or USB cable before installing options.
Installing options while your printer is turned on may
damage your printer and options.
Memo
After installing options, set the option settings with a
printer driver. Refer to “When Adding Options” P.46.
Installing an Additional Tray Unit
Install an optional additional tray unit when
you want to increase the paper capacity of your
printer. You can install up to three additional tray
units. After installation, you need to congure
the printer driver settings.
N35110A
Reference
For specications of the additional tray unit, refer to
“Supported Paper” P.48.
CAUTION
It may cause injury!
At least two people are needed to lift the printer
safely because it weighs about 37 Kg or 40 Kg.
1 Turn off your printer, and then unplug
the AC cord and the Ethernet or USB
cable.
Reference
“Turning Off the Power” P.21
2 Stack an additional tray aligning a back
side of each tray.
3 Place a printer on the additional trays
gently aligning the back sides of a
printer and the additional trays.
4 Plug the AC cord and Ethernet or USB
cable into your printer, and then turn on
the power switch.
- 24 -
Preparing Your Printer
1
1. Setup
Do not apply force to the printer’s output tray
while it is open.
Do not apply downward force to the paper tray
while it is pulled out.
Do not apply force to the printer from the back
while the paper tray is pulled out.
Installing Additional RAM
Install additional RAM to increase the memory
capacity of your printer in cases such as if
memory overow or the collate print errors
occur. Your printer supports 256 MB and 512 MB
RAM.
Note
Use only genuine Oki Data products. The performance
cannot be guaranteed when using other products.
The static electricity may damage parts. Discharge the
static electricity from your body by touching grounded
metallic parts, etc., before work.
For C843/ES8443, it is necessary to replace the installed
256 MB RAM with a 512 MB RAM.
Memo
For banner printing, installing additional memory is
recommended.
1 Turn off your printer, and then unplug
the AC cord and Ethernet or USB cable.
Reference
“Turning Off the Power” P.21
2 Open the access cover (1) on the right
side of a printer.
1
- 25 -
Preparing Your Printer
1
1. Setup
3 Slide the metal plate (2) upward to
remove.
Note
If the SD memory card socket is attached, remove
the SD memory card.
(1) Put your nger in the recess of the
metal plate (2), and slide it upward.
2
(2) Pinch the lower part of the metal
plate (2), and pull it forward.
2
4 Make sure the LED (3) indicated by the
arrow turns off. If it is lit, wait until it
turns off.
3
5 Insert the additional RAM (4) into the
slot and x it by pushing it toward the
printer.
Note
Be sure to check a direction of an additional RAM.
The additional RAM has small dents on its connector,
which are tted with a connector of a slot.
4
6 Install the metal plate (2).
(1) First, insert the upper part of the
metal plate (2) in the printer, then
install the metal plate.
2
(2) While holding the lower part of the
metal plate (2), slide the metal plate
downward and secure it.
2
Note
Attach the SD memory card socket before installing
the metal plate if the SD memory card socket was
attached to the printer.
- 26 -
Preparing Your Printer
1
1. Setup
7 Close the access cover (1).
1
8 Plug the AC cord and Ethernet or USB
cable into your printer, and then turn on
the power switch.
9 Press the scroll button or on the
operator panel.
10 Press the scroll button to select
[Conguration] and press the
<ENTER> button.
11 Press the scroll button several times
to select [System] and press the
<ENTER> button.
12 Press the scroll button several times to
select [RAM] and press the <ENTER>
button.
13 Check that the value of [RAM] has
increased.
- For memory expanded to 256 MB, it is
[512 MB]; for memory expanded to 512
MB, it is [768 MB].
Note
If the value of [RAM] has not increased, turn off
your printer and unplug the AC cord and Ethernet or
USB cable, and then reinstall the additional RAM.
14 Press the <ON LINE> button.
- 27 -
Preparing Your Printer
1
1. Setup
Installing the 16-GB SD Memory
Card Kit
For storing print data or a secure printing, install
the SD memory card kit.
SD memory socket
SD memory card
Memo
The SD memory socket is attached to the SD memory
card.
Note
Use only genuine Oki Data products. The performance
cannot be guaranteed when using other products.
The static electricity may cause damage to the parts.
Discharge the static electricity in your body by touching
grounded metallic parts, etc. before work.
You can not use the SD memory card with the protection
switch for accidental overwriting locked. Make sure to
release the lock.
1 Turn off your printer, and then unplug
the AC cord and Ethernet or USB cable.
Reference
“Turning Off the Power” P.21
2 Open the access cover (1).
1
3 Remove the metal plate (2) by sliding it
upward.
(1) Put your nger in the recess of the
metal plate (2), and slide it upward.
2
(2) Pinch the lower part of the metal
plate (2), and pull it forward.
2
4 Make sure the LED (3) indicated by the
arrow turns off. If it is lit, wait until it
turns off.
3
- 28 -
Preparing Your Printer
1
1. Setup
5 Install the SD memory card (4) into the
SD memory card socket (5).
4
5
6 Install the SD memory socket to the
printer with the screw (6) and tab (7) for
the SD memory card socket and attach
the connector (8).
6
7
8
7 Install the metal plate (2).
(1) First, insert the upper part of the
metal plate (2) in the printer, then
install the metal plate.
2
(2) While holding the lower part of the
metal plate (2), slide the metal plate
downward and secure it.
2
8 Close the access cover (1).
1
9 Plug the AC cord and Ethernet or USB
cable into your printer, and then turn on
the power switch.
10 Press the scroll button or on the
operator panel.
11 Press the scroll button to select
[Conguration] and press the
<ENTER> button.
- 29 -
Preparing Your Printer
1
1. Setup
12 Press the scroll button several times
to select [System] and press the
<ENTER> button.
13 Press the scroll button several times
to select [SD Card] and press the
<ENTER> button.
14 Check that the value of [SD Card] is
[16 GB].
SD Card
1/1
15GB[F52]
Note
[15 GB] may be displayed in [SD Card]. This is not
an error.
If the value of [SD Card] has not increased, turn off
your printer and unplug the AC cord and Ethernet or
USB cable, and then reinstall the SD memory card.
15 Press the <ON LINE> button.
Installing the Wireless LAN module
1
Turn off your printer, and then unplug
the AC cord.
2 Open the Wireless LAN module cover (1)
on the right side of a printer.
(1)
3 Pull out the connector, and plug it into
the Wireless LAN module.
- 30 -
Preparing Your Printer
1
1. Setup
4 Install the Wireless LAN module.
5 Close the Wireless LAN module cover.
6 Plug the AC cord.
7 Turn on your printer while pressing the
<ENTER> button.
8 Press the <ENTER> button.
9
Enter the administrator password, and
press the <ENTER> button.
The factory default password is “999999”.
10 Press the scroll button to select
[Wireless Module] and press the
<ENTER> button.
11 Press the scroll button to select
[Enable] and press the <ENTER>
button.
12 Press the <ON LINE> button.
Test Printing from the Printer
Check that you can print with the printer. Check
the detailed settings and status of your printer
by printing the contents of the settings (Menu
Map).
Note
When a printer is in the power saving mode, press the
<POWER SAVE> button to restore from the mode.
1 Press the <Fn> key on the operator
panel.
2 Enter “100” using the ten-key pad and
press the <ENTER> button.
3 Press the <ENTER> button as
[Execute] is selected.
Configuration 1/1
Execute
4 After nishing a print of printer settings,
a setup for printing from a printer
completes.
Reference
You can also print reports and lists for each function.
Refer to the User’s Manual (Advanced).
- 31 -
Connecting to a Computer
1
1. Setup
Connecting to a Computer
This section explains how to connect your printer to a computer and install a printer driver software
using the provided “Software DVD-ROM”.
Prepare a computer with a DVD drive.
Connection Method
You can select either of the following connection methods:
“Network Connection” P.32
“USB Connection” P.42
Product Requirements
Your printer supports the following operating systems:
Windows 10/Windows 10 (64bit Version)
Windows 8.1/Windows 8.1 (64bit Version)
Windows 8/Windows 8 (64bit Version)
Windows 7/Windows 7 (64bit Version)
Windows Vista/Windows Vista (64bit Version)
Windows Server 2012 R2
Windows Server 2012
Windows Server 2008 R2
Windows Server 2008/Windows Server 2008 (x64 Version)
Mac OS X 10.8.5 to 10.11
Types of Drivers
The types of the drivers that can be installed are as follows.
For Windows
Type Description
PCL The PCL printer driver is suitable for printing of business documents.
PS The PS printer driver is suitable for printing of documents including PostScript fonts and EPS data.
For Mac OS X
Type Description
PS The PS printer driver can be also used for normal printing. The PS printer driver do not support
C813/C823.
PCL The PCL printer driver can be also used for normal printing. The PCL printer driver support only
C813/C823.
Note
Depending on the printer driver version or the version of Windows or Mac OS X, the description may be different.
- 32 -
Connecting to a Computer
1
1. Setup
Network Connection
Perform the following procedure to connect your
printer to a computer via network.
Connecting an Ethernet Cable
Be sure to connect your printer to a network
with an Ethernet cable before driver installation.
1 Prepare an Ethernet cable (1) and a hub
(2).
Prepare an Ethernet cable (category 5, twisted
pair, straight) and a hub separately.
1
2
2 Turn off your printer and computer.
Reference
“Turning Off the Power” P.21
3 Plug one end of the Ethernet cable into
the network interface connection (3) on
the back of the printer.
4 Plug the other end of the Ethernet cable
into the hub (2).
3
2
Connecting in Wireless LAN
(Infrastructure Mode) (Optional)
Note
In a wireless LAN environment, the machine enters sleep
mode, but does not enter deep sleep mode.
Do not place any devices (especially microwave
ovens or digital cordless telephones) that emit weak
electromagnetic waves near the machine.
Install the machine near a wireless LAN access point or
wireless device with no obstacles between them (the
distance should be within 30 m).
Wireless connections may be difcult if there is any metal,
aluminum framed windows, or reinforced concrete walls
between the machine and the wireless LAN access point.
Wireless LAN connections may have slower transmission
speeds, depending on the environment, than wired LAN
or USB connections. We recommend using a wired LAN or
a USB connection to print large amounts of data, such as
photographs.
To choose a valid default gateway
1
Press the scroll button several times
to select [Admin Setup] and press the
<ENTER> button.
2 Enter the administrator password, and
press the <ENTER> button.
The factory default password is “999999”.
3 Press the scroll button several times
to select [Network Setup] and press
the <ENTER> button.
4 Press the scroll button several times
to select [Enabling Default Gateway]
and press the <ENTER> button.
5 Press the scroll button to select
[Wireless(Infrastructure)].
6 Press the <ENTER> button.
Connecting Using WPS
If the wireless LAN access point supports WPS,
the connection to the wireless LAN can be made
easily by using the easy setup button (WPS
button).
Follow the procedure below for the setup.
- 33 -
Connecting to a Computer
1
1. Setup
1 Conrm the position of the easy setup
button and when to press the button
by referring to the user manual of the
wireless LAN access point.
2 Conrm that the wireless LAN access
point has been activated and is
functioning normally.
3 Turn on the printer.
4 Press the scroll button several times
to select [Wireless(Infrastructure)
Setting], and then press the <ENTER>
button.
5 Enter the administrator password, and
press the <ENTER> button.
The factory default password is “999999”.
6 Press the scroll button several times
to select [Automatic setup (WPS)],
and then press the <ENTER> button.
7 Select [WPS-PBC], and then press the
<ENTER> button.
8 Select [Yes], and then press the
<ENTER> button.
9 The Printer starts searching for wireless
LAN access points. During 2 minutes,
press the easy setup button for the
wireless LAN access point for a few
seconds.
Once Connection successful is displayed,
it indicates that the wireless LAN setup has
completed.
If Connection failed is displayed, repeat the
procedure from step 4.
If an antenna appears on the upper right corner
of the operator panel, it indicates that the
connection is successful.
Connecting by Selecting a Wireless
LAN Access Point from the Control
Panel
If the wireless LAN access point does not support
WPS, you can connect by selecting the wireless
LAN access point you want to use from those the
machine has detected. To do this, an encryption
key is required.
1 Conrm and write down the SSID and
encryption key by referring to the user
manual of the wireless LAN access point.
Memo
The SSID is also called the network name, ESSID, or
ESS-ID.
The encryption key is also called the network key,
security key, password, or pre-shared key.
2 Conrm that the wireless LAN access
point has been activated and is
functioning normally.
3 Turn on the printer.
4 Press the scroll button several times
to select [Wireless(Infrastructure)
Setting], and then press the <ENTER>
button.
5 Enter the administrator password, and
press the <ENTER> button.
The factory default password is “999999”.
6 Press the scroll button several times to
select [Wireless Network Selection],
and then press the <ENTER> button.
7 The printer starts searching for wireless
LAN access points. Please wait.
8 A list of available wireless LAN access
point SSIDs are displayed. Press or ,
select a wireless LAN access point, and
press the <ENTER> button.
Note
If only [Manual Setup] is displayed or the desired
wireless LAN network SSID is not displayed, follow
the procedure in “Connecting by Manual Setup from
Control Panel” to do the settings.
9 A screen opens in which to input the
encryption key appropriate to the
encryption procedure for the selected
wireless LAN access point; input the
encryption key.
Memo
The encryption key differs depending on the wireless
LAN access point and security.
If [WPA Pre-shared Key] is displayed
Item Explanation
Encryption
method
WPA/WPA2-PSK
Encryption key Enter the pre-shared key.
- 34 -
Connecting to a Computer
1
1. Setup
If [WEP Key] is displayed
Item Explanation
Encryption
method
WEP
Encryption key Input the WEP key.
Other settings
Item Explanation
Encryption
method
Disable
Encryption key Input is not necessary.
10 The SSID selected in step 7 and
the encryption method in step 8
are displayed as security in of the
conrmation screen. If the SSID is
the same as the one set up in step
1,
select [ENTER]:Execute and press the
<ENTER> button.
Once Connection successful is displayed,
it indicates that the wireless LAN setup has
completed.
If Connection failed is displayed, repeat the
procedure from step 4.
If an antenna appears on the upper right corner
of the operator panel, it indicates that the
connection is successful.
Connecting by Manual Setup from
Control Panel
Congure the wireless LAN access point
information (SSID, encryption method, and
encryption key) manually, and connect to the
wireless LAN.
1 Check and write down the SSID, the
encryption method and the encryption
key by referring to the user manual of
the wireless LAN access point.
Note
When the encryption method is WPA-EAP or WPA2-
EAP, congure from the printer’s web page.
Memo
The SSID is also called the network name, ESSID, or
ESS-ID.
The encryption key is also called the network key,
security key, password, or pre-shared key.
2 Conrm that the wireless LAN access
point has been activated and is
functioning normally.
3 Turn on the printer.
4 Press the scroll button several times
to select [Wireless(Infrastructure)
Setting], and then press the <ENTER>
button.
5
Enter the administrator password,and
press the <ENTER> button.
The factory default password is “999999”.
6 Press the scroll button several times to
select [Wireless Network Selection],
and then press the <ENTER> button.
7 The printer starts searching for wireless
LAN access points. Please wait.
8 A list of available wireless LAN access
point SSIDs are displayed. Press or ,
select [Manual Setup] at the end of the
list, and press the <ENTER> button.
9 Input the SSID recorded in step 1, and
press the <ENTER> button.
Note
It is case sensitive. Please enter it correctly.
10 Select the encryption method conrmed
in step 1, and press the <ENTER>
button.
Memo
The encryption key differs depending on the wireless
LAN access point and security.
11 Input the encryption key recorded in
step 1, and press the <ENTER> button.
12 Press the <ENTER> button.
Once Connection successful is displayed,
it indicates that the wireless LAN setup has
completed.
If Connection failed is displayed, repeat the
procedure from step 4.
If an antenna appears on the upper right corner
of the operator panel, it indicates that the
connection is successful.
- 35 -
Connecting to a Computer
1
1. Setup
Installing a Printer Driver
(for Windows)
To complete the network connection with a
Windows computer, rst set IP addresses for the
printer, and then install a printer driver on the
computer.
If there is no DHCP server or BOOTP server on
the network, you need to manually congure the
IP address on the computer or printer.
If your network administrator or internet service
provider species an unique IP address for the
computer and your printer, you need to set the
IP addresses manually.
Note
You need to complete the network setting of the computer
before this procedure.
To complete this procedure, you must be logged in as an
administrator.
When setting an IP address manually, ask the network
administrator or your internet service provider which
IP address to use. If the IP address is set wrong, the
network may go down or Internet access may be disabled.
Memo
If conguring a small network consisting of only your
printer and a computer, set IP addresses as shown below
(according to RFC1918).
For the computer
IP address : 192.168.0.1 - 254
Subnet mask : 255.255.255.0
Default gateway : not used
DNS server : not used
For the printer
IP address Set : Manual
IP address:
192.168.0.1 - 254 (select a
different value from that of the
computer)
Subnet Mask : 255.255.255.0
Default Gateway : 0.0.0.0
Network Scale : Small
To set [Network Scale], press the scroll button
or
and then select [Admin Setup] > [Network Setup] >
[Network Scale].
First, Set the IP address of the printer.
1 Turn on the printer.
2 Press the <MENU> button on the
operator panel.
3 Press the scroll button to select
[Admin Setup], and press the
<ENTER> button.
4 Enter the administrator password, using
the numeric (0-9) keys.
The factory default password is “999999”. Press
<ENTER> button after each character you input.
5 Press the <ENTER> button.
6 Check that [Network Setup] is selected
and press the <ENTER> button.
- 36 -
Connecting to a Computer
1
1. Setup
7 Press the to select [IP Address Set],
and press the <ENTER> button.
8 If setting the IP address manually, press
the scroll button and select [Manual],
and press the <ENTER> button.
Proceed to the step 9.
If obtaining the IP address automatically, check
that [Auto] is selected, and press the <ENTER>
button.
Proceed to the step 15.
9 Press the <BACK> button until
[Network Setup] is displayed.
Press the scroll button to select
[IPv4 Address], and press the
<ENTER> button.
10 Enter the IP address using the numeric
(0-9) keys, and press the <ENTER>
button.
To move to the next box, press the <ENTER>
button.
11 Press the <BACK> button until
[Network Setup] is displayed.
Press the scroll button
to select
[Subnet Mask], and press the
<ENTER> button.
12 Enter the subnet mask in the same
manner of IP address.
To move to the next box, press the <ENTER>
button.
13 Press the <BACK> button until
[Network Setup] is displayed.
Press the scroll button to select
[Gateway Address], and press the
<ENTER> button.
- 37 -
Connecting to a Computer
1
1. Setup
14 Enter the default gateway address and
press the <ENTER> button.
To move to the next box, press the <ENTER>
button.
After entering all settings, press the <BACK>
button.
Gateway Address
192 . 168. 0. 254
15 When the setup menu screen is
displayed, press the <ON LINE> button
to complete the network settings.
Next, install the printer driver on the
computer.
1 Insert the included “Software DVD-ROM”
into a computer.
2 When [AutoPlay] is displayed, click
[Run Setup.exe].
Memo
If the [User Account Control] dialog box is
displayed, click [Yes].
3 Select a language from the drop-down
list.
4 Read the license agreement, and then
click [Accept].
5 Read [Environment advice], and then
click [Next].
6 Select [Network] in accordance to the
connection method of the machine and
computer, and then click [Next].
7 Select the model name of the machine,
and then click [Next].
- 38 -
Connecting to a Computer
1
1. Setup
8 Click [Install Optional Software].
Installation starts.
Memo
The following software is installed.
- PCL6 Printer Driver (Including Network Extension
and Color Swatch Utility)
- FAQ
Install other software from Custom Install
9 Make sure that the software is
successfully installed, and then click
[Printing Test].
Select the printer for test printing, and the click
[Printing Test].
Make sure that the test printing was successful,
and then click [OK].
10 Click [Complete].
11 Click [Next].
If the following dialog box is displayed, click
[Yes].
12 Click [Exit].
Installing a Printer Driver
(For Mac OS X)
To complete the network connection with a Mac
operating system, install a printer driver on the
computer and set your printer as a network
printer.
Note
Disable the anti-virus software before starting this
procedure.
Install the Mac OS X PS printer
driver. (Except C813/C823)
When the installation is complete, print a test
page in step 14.
- 39 -
Connecting to a Computer
1
1. Setup
1 Make sure that the machine and a
computer are connected and the
machine is turned on.
2 Insert the “Software DVD-ROM” into a
computer.
3 Double-click the [OKI] icon on the
desktop.
4 [Drivers] > [PS] > Double-click
[Installer for OSX].
5 Enter the administrator password, and
then click [OK].
Follow the on-screen instructions to complete the
installation.
6 Select [System Preferences] from the
Apple menu.
7 Click [Printers & Scanners].
8 Click [+], and select [Add Printer or
Scanner] when the menu is displayed.
9 Click [Default].
10 Select the machine where [Kind] is
[Bonjour], and then select [OKI C833
PS] from the [Use].
Connection Priner Name Kind
Network OKI-C833 (last 6 digits of
MAC address)
Bonjour
USB OKI DATA CORP C833 USB
Memo
To change the name, enter a new name into
[Name:].
11 Click [Add].
12 If the installable options conguration
screen is displayed, click [OK].
13 Make sure that the machine is added
to [Printers] and [OKI C833 PS] is
displayed for [Kind].
Note
If [OKI C833 PS] is not displayed for [Kind]
correctly, click [-], delete the machine from
[Printers], and then newly perform steps 8 to 12.
14 Click [Open Print Queue...].
15 Select [Print Test Page] from the
[Printer] menu.
- 40 -
Connecting to a Computer
1
1. Setup
Install the Mac OS X PCL printer
driver. (C813/C823 only)
When the installation is complete, print a test
page in step 14.
1 Make sure that the machine and a
computer are connected and the
machine is turned on.
2 Insert the “Software DVD-ROM” into a
computer.
3 Double-click the [OKI] icon on the
desktop.
4 [Drivers] > [PCL] > [C823] > Double-
click [Installer for OSX].
5 Enter the administrator password, and
then click [OK].
Follow the on-screen instructions to complete the
installation.
6 Select [System Preferences] from the
Apple menu.
7 Click [Printers & Scanners].
8 Click [+], and select [Add Printer or
Scanner] when the menu is displayed.
9 Click [Default].
10 Select the machine where [Kind] is
[Bonjour], and then select [OKI C823
PCL] from the [Use].
Types of
Names
Displayed in the
Connection
Methods
List
Network OKI-C823 (last 6 digits of
MAC address)
Bonjour
USB OKI DATA CORP C823 USB
Memo
To change the name, enter a new name into
[Name:].
11 Click [Add].
12 If the installable options conguration
screen is displayed, click [OK].
13 Make sure that the machine is added
to [Printers] and [OKI C823 PCL] is
displayed for [Kind].
Note
If [OKI C823 PCL] is not displayed for [Kind]
correctly, click [-], delete the machine from
[Printers], and then newly perform steps 8 to 12.
14 Click [Open Print Queue...].
15 Select [Print Test Page] from the
[Printer] menu.
- 41 -
Connecting to a Computer
1
1. Setup
Connecting in Wireless LAN
(AP Mode) (Optional)
The wireless LAN (AP mode) connects directly
to a wireless terminal (computer, tablet,
smartphone, etc.) without using a wireless LAN
access point.
Note
You cannot enable wireless LAN (infrastructure) and
wireless LAN (AP mode) at the same time.
Do not place any devices (especially microwave
ovens or digital cordless telephones) that emit weak
electromagnetic waves near the machine.
Wireless connections may be difcult if there is any
metal, aluminum framed windows, or reinforced concrete
walls between the machine and the wireless terminal
(computer, tablet, smartphone, etc.).
Wireless LAN connections may have slower transmission
speeds than wired LAN or USB connections, depending on
the environment. We recommend using a wired LAN or a
USB connection.
Preparing to use the wireless LAN
(AP mode)
The machine becomes a simple wireless access
point, and wireless terminals (computer, tablet,
smartphone, etc.) can connect directly to it.
Before you start, conrm that the wireless
device you are using supports the following
environment.
Item Value
Standard IEEE 802.11 b/g/n
Security WPA2-PSK (AES)
Automatic Setup (Push Button)
If the wireless terminal (computer, tablet,
smartphone, etc.) supports WPS-PBC (push
button), then you can use the WPS button to
connect via wireless (AP mode).
Follow the procedure below to connect.
1 Conrm the position of the WPS button
in the user’s manual provided with the
wireless terminal (computer, tablet,
smartphone, etc.)
2 Turn on the printer.
3
Press the scroll button several times to
select [Wireless(AP Mode) Setting] ,
and then press the <ENTER> button.
4 Enter the Admin password, and press
the <ENTER> button.
(The default password is 999999.)
5 Select [Enable], and then press the
<ENTER> button.
6 Press the scroll button to select
[Automatic Setup (Push Button)],
and then press the <ENTER> button.
7 Select [Yes], and then press the
<ENTER> button.
8 Start WPS-PBC (push button) on the
wireless terminal (computer, tablet,
smartphone, etc.).
- 42 -
Connecting to a Computer
1
1. Setup
Manual connections
If the wireless terminal (computer, tablet,
smartphone, etc.) does not support WPS-PBC
(push button), then you can input the machine’s
SSID and password into the wireless terminal
(computer, tablet, smartphone, etc.) to connect.
Follow the procedure below to connect.
1 Turn on the printer.
2 Press the scroll button several times to
select [Wireless(AP Mode) Setting],
and then press the <ENTER> button.
3 Enter the Admin password, and press
the <ENTER> button.
(The default password is 999999.)
4 Select [Enable], and then press the
<ENTER> button.
5 Press the scroll button several times
to select [Manual Setup], and then
press the <ENTER> button.
6 Conrm the [SSID] and [Password]
that are displayed on the printer.
7 Input the printer’s [SSID] and
[Password] that were conrmed in step
7 for the wireless terminal (computer,
tablet, smartphone, etc.).
USB Connection
Perform the following procedure to connect your
printer to a computer via USB.
Connecting a USB Cable
1
Prepare a USB cable (1).
A USB cable is not supplied with your printer.
Prepare a USB 2.0 cable separately.
1
Memo
Use a USB 2.0 Hi-Speed cable for a USB 2.0 Hi-
Speed connection.
2 Turn off your printer and the computer.
Reference
“Turning Off the Power” P.21
3 Plug one end of the USB cable into the
USB interface connector (2) on the back
of the printer.
4 Plug the other end of the USB cable into
the computer’s USB interface connector.
2
Note
Do not plug the USB cable into the network interface
connection. Doing so may cause a malfunction.
- 43 -
Connecting to a Computer
1
1. Setup
Installing a Printer Driver
(For Windows)
Note
You must be logged in as an administrator to complete
this procedure.
1 Insert the included “Software DVD-ROM”
into a computer.
2 When [AutoPlay] is displayed, click
[Run Setup.exe].
Memo
If the [User Account Control] dialog box is
displayed, click [Yes].
3
Select a language from the drop-down list.
4 Read the license agreement, and then
click [Accept].
5 Read [Environment advice], and then
click [Next].
6 Select [USB] in accordance to the
connection method of the machine and
computer, and then click [Next].
7 Select the model name of the machine,
and then click [Next].
8 Click [Install Optional Software].
Installation starts.
Memo
The following software is installed.
- PCL6 Printer Driver (Including Color Swatch
Utility)
- FAQ
Install other software from Custom Install.
9 Make sure that the software is
successfully installed, and then click
[Printing Test].
Select the printer for test printing, and the click
[Printing Test].
Make sure that the test printing was successful,
and then click [OK].
10 Click [Complete].
- 44 -
Connecting to a Computer
1
1. Setup
11 Click [Next].
If the following dialog box is displayed, click
[Yes].
12 Click [Exit].
Installing a Printer Driver
(For Mac OS X)
Note
Disable the anti-virus software before starting this
procedure.
Install the Mac OS X PS printer
driver. (Except C813/C823)
When the installation is complete, print a test
page in step 14.
1 Make sure that the machine and a
computer are connected and the
machine is turned on.
2 Insert the “Software DVD-ROM” into a
computer.
3 Double-click the [OKI] icon on the
desktop.
4 [Drivers] > [PS] > Double-click
[Installer for OSX].
5 Enter the administrator password, and
then click [OK].
Follow the on-screen instructions to complete the
installation.
6 Select [System Preferences] from the
Apple menu.
7 Click [Printers & Scanners].
8 Click [+], and select [Add Printer or
Scanner] when the menu is displayed.
9 Click [Default].
10 Select the machine where [Kind] is
[USB], and then select [OKI C833 PS]
from the [Use].
Connection Priner Name Kind
Network OKI-C833 (last 6 digits of
MAC address)
Bonjour
USB OKI DATA CORP C833 USB
Memo
To change the name, enter a new name into
[Name:].
- 45 -
Connecting to a Computer
1
1. Setup
11 Click [Add].
12 If the installable options conguration
screen is displayed, click [OK].
13 Make sure that the machine is added
to [Printers] and [OKI C833 PS] is
displayed for [Kind].
Note
If [OKI C833 PS] is not displayed for [Kind]
correctly, click [-], delete the machine from
[Printers], and then newly perform steps 8 to 12.
14 Click [Open Print Queue...].
15 Select [Print Test Page] from the
[Printer] menu.
Install the Mac OS X PCL printer
driver. (C813/C823 only)
When the installation is complete, print a test
page in step 14.
1 Make sure that the machine and a
computer are connected and the
machine is turned on.
2 Insert the “Software DVD-ROM” into a
computer.
3 Double-click the [OKI] icon on the
desktop.
4 [Drivers] > [PCL] > [C823] > Double-
click [Installer for OSX].
5 Enter the administrator password, and
then click [OK].
Follow the on-screen instructions to complete the
installation.
6 Select [System Preferences] from the
Apple menu.
7 Click [Printers & Scanners].
8 Click [+], and select [Add Printer or
Scanner] when the menu is displayed.
9 Click [Default].
10 Select the machine where [Kind] is
[USB], and then select [OKI C823 PCL]
from the [Use].
Types of
Names
Displayed in the
Connection
Methods
List
Network OKI-C823 (last 6 digits of
MAC address)
Bonjour
USB OKI DATA CORP C823 USB
- 46 -
Connecting to a Computer
1
1. Setup
Memo
To change the name, enter a new name into
[Name:].
11 Click [Add].
12 If the installable options conguration
screen is displayed, click [OK].
13 Make sure that the machine is added
to [Printers] and [OKI C823 PCL] is
displayed for [Kind].
Note
If [OKI C823 PCL] is not displayed for [Kind]
correctly, click [-], delete the machine from
[Printers], and then newly perform steps 8 to 12.
14 Click [Open Print Queue...].
15 Select [Print Test Page] from the
[Printer] menu.
When Adding Options
If options such as additional tray unit and/or
SD memory card kit have been installed, use
following procedures to change printer driver
settings.
For Windows PCL Driver
1
Click [Start] > [Devices and Printers].
2 Right-click the [OKI C833] icon and
select [Printer Properties]. (If you
have installed multiple printer drivers,
select [Printer Properties] >[OKI
C833 PCL6].)
3 Select the [Device Options] tab.
4 If using a network connection, select
[Get Printer Settings].
If using a USB connection,
enter the total number of trays
excluding the multipurpose tray in
[Installed Paper Trays]. For example,
when three option trays are installed,
enter “4” as the trays 1, 2, 3 and 4 are
available.
5 Click [OK].
- 47 -
Connecting to a Computer
1
1. Setup
For Windows PS Driver
1
Click [Start] > [Devices and Printers].
2 Right-click the [OKI C833] icon and
then select [Printer Properties]. (If
you have installed multiple printer
drivers, select [Printer Properties] >
[OKI C833 PS].)
3 Select the [Device Settings] tab.
4 If using a network connection, select
[Get installed options automatically]
under [Installable Options], and then
click [Setup].
If using a USB connection, select
an appropriate number of trays in
[Available Trays] under [Installable
Options].
5 Click [OK].
For Mac OS X Driver
1
Select [System Preferences] from the
Apple menu.
2 Click [Printers & Scanners].
3 Select the name of your printer and then
click [Options & Supplies].
4 Select the [Options] tab.
5 Select the number of available trays in
[Available Tray], and then click [OK].
- 48 -
2
2. Printing Basic Operation
2. Printing Basic Operation
This chapter describes how to print documents from a computer.
Supported Paper
Supported Paper Types
For high-quality printing, be sure to use paper types that satisfy requirements such as those for
material quality, weight, and surface nish. Please use digital photo print paper.
If not using recommended paper, please check the print quality and the movement of the paper
sufciently beforehand to make sure that there are no problems. Your printer supports the following
types of paper.
Paper Type Paper Size mm (inch) Paper Weight
Plain paper A3 297 x 420 64 to 256 g/m
2
For duplex print, 64 to 220 g/m
2
Note
If the paper size is set at A6, A5, or
with a paper width narrower than 148
mm (A5 width), the printing will be
slower.
A4 210 x 297
A5 148 x 210
A6 105 x 148
B4 257 x 364
B5 182 x 257
B6 128 x 182
B6 Half 64 x 182
Tabloid (11 x 17)
Letter 215.9 x 279.4
(8.5 x 11)
Legal 13" 215.9 x 330.2
(8.5 x 13)
Legal 13.5" 215.9 x 342.9
(8.5 x 13.5)
Legal 14" 215.9 x 355.6
(8.5 x 14)
Executive 184.2 x 266.7
(7.25 x 10.5)
Statement (5.5 x 8.5)
8.5"SQ (8.5 x 8.5)
Folio 210 x 330.2
8K (260 x 368 mm) 260 x 368
8K (270 x 390 mm) 270 x 390
8K (273 x 394 mm) 273 x 394
16K (184 x 260 mm) 184 x 260
16K (195 x 270 mm) 195 x 270
16K (197 x 273 mm) 197 x 273
Custom Size Width:
64 - 297
Length:
90 - 1321
64 to 256 g/m
2
- 49 -
Supported Paper
2
2. Printing Basic Operation
Paper Type Paper Size mm (inch) Paper Weight
Envelope Nagagata #3 120 x 235 Envelopes should be 24lb paper, and
ap parts of envelopes should be folded.
Nagagata #4 90 x 205
Nagagata #40 90 x 225
Youkei #0 120 x 235
Youkei #4 105 x 235
Kakugata #2 240 x 332
Kakugata #3 216 x 277
C4 229 x 324
C5 162 x 229
DL 110 x 220
Com-10 104.8 x 241.3
Index card Index card 76.2 x 127
(3 x 5)
Photo Photo (4 x 6 inch) (4 x 6)
Photo (5 x 7 inch) (5 x 7)
Hagaki Hagaki 100 x 148
Oufuku Hagaki Oufuku Hagaki 148 x 200
Use paper that meets the following conditions*
1
:
Paper that meets the conditions for plain paper.
An ink used for a part printing is heat resistant (230°C).
Note
When specifying a printing area, please take into account the differences of printing position as followings:
Print start position: ±2 mm, Paper skew: ±1 mm/100 mm, Image stretch: ±1 mm/100 mm
(when paper ream weight is 70 kg)
This printer cannot print on an ink.
Use paper that meets the following conditions*
2
:
A pigment or an ink used to color paper is heat resistant (230°C).
Paper that has same characteristics with light paper and used for an electronic photo printer.
Paper Recommendations
Your printer will handle a variety of print media,
including a range of paper weights and sizes.
This section provides general advice on choice of
media, and explains how to use each type.
The best performance will be obtained when
using standard 75 - 90 g/m
2
paper designed for
use in copiers and laser printers.
Use of heavily embossed or very rough textured
paper is not recommended.
Pre-printed stationery can be used, but the ink
must not offset when exposed to the high fuser
temperatures used in the printing process.
CAUTION
Envelopes should be free from twist, curl or
other deformations. They should also be of the
rectangular ap type, with glue that remains
intact when subjected to hot roll pressure fusing
used in this type of printer. Window envelopes are
not suitable.
Labels should also be of the type recommended
for use in copiers and laser printers, in which the
base carrier page is entirely covered by labels.
Other types of label stock may damage the printer
due to the labels peeling off during the printing
process.
- 50 -
Supported Paper
2
2. Printing Basic Operation
Storing Paper
Store paper under the following conditions to
maintain quality.
Inside a cabinet or other dry and dark place
On a at surface
Temperature: 20°C
Humidity: 50% RH (relative humidity)
Do not store in the following locations.
Directly on the oor
In direct sunlight
Near the inside of an exterior wall
On an uneven surface
Where static electricity may be generated
In places that are excessively hot or where
temperature rapidly changes
Near a copier, air conditioner, heater, or duct
Note
Do not unwrap the paper until you are ready to use the
paper.
Do not leave paper unwrapped for a long period. Doing
so may result in paper handling and print quality issues.
Depending on a media you use, usage conditions and a
storing conditions, a decrease in paper quality or curling
of the paper may occur.
- 51 -
Supported Paper
2
2. Printing Basic Operation
Paper Loaded on the Tray
Your printer has two built-in trays (tray 1 and the MP tray) and an additional tray unit (tray 2/3/4).
Refer to the list below to check the supported paper and capacities of each tray.
Note
Duplex printing can not be performed on paper indicated with an asterisk (*).
Tray Supported paper size Paper capacity Paper weight
Tray1 A3
A4
A5
A6
B4
B5
B6
Tabloid
Letter
Legal 13”
Legal 13.5”
Legal 14”
Executive
Statement*
8.5”SQ
Folio
8K (260 x 368 mm)
8K (270 x 390 mm)
8K (273 x 394 mm)
16K (184 x 260 mm)
16K (195 x 270 mm)
16K (197 x 273 mm)
Custom Size
300 sheets
(when paper weight is 80 g/m
2
)
Light
(64 to 82 g/m
2
)
Medium Light
(83 to 90 g/m
2
)
Medium
(91 to 105 g/m
2
)
Heavy
(106 to 128 g/m
2
)
Ultra Heavy1
(129 to 188 g/m
2
)
Ultra Heavy2
(189 to 220 g/m
2
)
Tray2/3/4
(option)
A3
A4
A5
B4
B5
Tabloid
Letter
Legal 13”
Legal 13.5”
Legal 14”
Executive
8.5”SQ
Folio
8K (260 x 368 mm)
8K (270 x 390 mm)
8K (273 x 394 mm)
16K (184 x 260 mm)
16K (195 x 270 mm)
16K (197 x 273 mm)
Custom Size
530 sheets
(when paper weight is 80 g/m
2
)
Light
(64 to 82 g/m
2
)
Medium Light
(83 to 90 g/m
2
)
Medium
(91 to 105 g/m
2
)
Heavy
(106 to 128 g/m
2
)
Ultra Heavy1
(129 to 188 g/m
2
)
Note
Weight of paper loaded on an
additional tray unit is 64 to
176 g/m
2
.
The specied paper weight
of Ultra Heavy1 is described
as 129 to 188 g/m
2
, but the
printable weight is up to
176 g/m
2
.
- 52 -
Supported Paper
2
2. Printing Basic Operation
Tray Supported paper size Paper capacity Paper weight
MP Tray A3
A4
A5
A6*
B4
B5
B6
B6 Half*
Tabloid
Letter
Legal 13”
Legal 13.5”
Legal 14”
Executive
Statement*
8.5”SQ
Folio
8K (260 x 368 mm)
8K (270 x 390 mm)
8K (273 x 394 mm)
16K (184 x 260 mm)
16K (195 x 270 mm)
16K (197 x 273 mm)
Index Card*
Photo (4 x 6 inch)*
Photo (5 x 7 inch)*
Custom Size
Envelope Nagagata #3*
Envelope Nagagata #4*
Envelope Nagagata #40*
Envelope Yougata #0*
Envelope Yougata #4*
Envelope Kakugata #2*
Envelope Kakugata #3*
C4*
C5*
DL*
Com-10*
Postcard*
Double Postcard*
100 sheets
(when paper weight is 80 g/m
2
)
10 envelopes
Light
(64 to 82 g/m
2
)
Medium Light
(83 to 90 g/m
2
)
Medium
(91 to 105 g/m
2
)
Heavy
(106 to 128 g/m
2
)
Ultra Heavy1
(129 to 188 g/m
2
)
Ultra Heavy2
(189 to 220 g/m
2
)
Ultra Heavy3
(221 to 256 g/m
2
)
- 53 -
How to Print from the Tray
2
2. Printing Basic Operation
How to Print from the Tray
The following procedure explains how to load paper in tray 1 or tray 2/3/4 (option).
Memo
This procedure explains to load paper in tray 1. The same procedure is applied to tray 2/3/4.
1 Pull out the paper tray (1).
1
2 Set the paper size dial (2) to match the
size of the paper to be loaded.
Set the dial to [A4 ] when loading A4 size
paper in horizontal orientation.
2
3 Slide the paper guide (3) and paper
stopper (4) to the size of paper to be
loaded.
3
4
Note
When loading A6 size paper, move the paper stopper
(4) forward and remove it once, then install it on the
metal part.
4
4 Flex paper back and forth, and then fan
it. Straighten the edges of the paper
stack on a level surface.
5 Load paper with the print side face down
and press it from above.
Note
Do not load paper exceeding the [ ] mark (5) of the
paper guide.
5
6 Secure the loaded paper with the paper
guide.
7 Check if a size of loaded paper matches
the setting of paper size dial.
8 Return the paper tray to the printer.
Memo
If loading a paper that you cannot select the
size with a paper size dial options, set the dial to
[Other], and then set a paper size on the operator
panel.
9 Open a le you want to print, and print it.
- 54 -
How to Print from the MP Tray
2
2. Printing Basic Operation
How to Print from the MP Tray
This procedure explains how to load paper in the MP tray.
Note
Do not load paper of different sizes, types or weights at the same time.
When adding paper, remove the paper on the MP tray and straighten the edges of both stacks of paper, and then load them
again.
Do not put anything other than paper for printing in the MP tray.
1 Open the MP tray (1) forward by
inserting your ngers into the front
recesses (2).
2
2
1
2 Pull out the paper support (3) by holding
the center part of it.
3
3 Unfold the sub support (4).
4
4 Open the paper set cover (5).
5
5 Adjust the manual feeding paper guide
(6) to the width of paper to be loaded.
6
6 Insert the paper with the print side face
up.
Note
Do not load paper exceeding the [ ] mark (7) of the
paper guide.
7
- 55 -
How to Print from the MP Tray
2
2. Printing Basic Operation
ABC
When loading paper vertically or horizontally
Com-10, DL, C5
ABC
C4
Memo
When loading envelopes in the MP tray, load them face up
with the orientation noted below.
- Com-10, DL and C5 are loaded with the ap folded
and the ap should come to the top side in the feeding
direction.
- C4 is loaded with the ap folded and the ap should
come to the right side in the feeding direction.
Note
The paper may be wrinkled or curled after printing.
Use paper stored in proper temperature and humidity
conditions. Do not use paper that is curled or waved
because of humidity.
Do not print on the back side of paper on which other
printer has printed.
Curling of a postcard or an envelope may cause the ink
absorbing problem. Use paper that is not curled. Correct a
paper Curling within 2 mm.
Printing an envelope with an adhesive ap bent cause the
ink absorbing problem.
7 Close the paper set cover (5).
5
If always printing on same size or type paper
from the MP tray, register the paper on the
operator panel. If printing once, proceed to the
step 18.
Note
When a printer is in the power saving mode, press
the <POWER SAVE> button to restore from the
mode.
Make sure that the message “Ready To Print” is
displayed in the operator panel. If the message is not
displayed, press the <ON LINE> button.
8 Press the <Fn> key.
9 Enter “90” and press the <ENTER>
button.
10 When [Paper Size] is displayed, select
the size of the loaded paper and then
press the <ENTER> button.
Reference
If [Custom] is selected for [Paper Size], you need
to register the custom size. For how to register the
custom size, refer to “Printing in Custom Sizes”
P.58.
- 56 -
How to Print from the MP Tray
2
2. Printing Basic Operation
11 Press the <BACK> button until
[MPTray Cong] is displayed.
12 Press the scroll button to select
[Media Type] and then press the
<ENTER> button.
13 Press the scroll button to select the
type of the loaded paper and then press
the <ENTER> button.
14 Press the <BACK> button until
[MPTray Cong] is displayed.
15 Press the scroll button to select
[Media Weight] and then press the
<ENTER> button.
16 Press the scroll button to select the
weight of the loaded paper and then
press the <ENTER> button.
17 Press the <ON LINE> button to exit the
menu mode.
18 Open the le you want to print, and print
it by following the procedures below.
For Windows PCL Printer Driver
1
From the [File] menu, select [Print].
2 Click [Preferences].
3 On the [Setup] tab, select a paper size
from [Size].
4 Select [Multipurpose Tray] from
[Source].
5 Start printing.
- 57 -
How to Print from the MP Tray
2
2. Printing Basic Operation
For Windows PS Printer Driver
1
From the [File] menu, select [Print].
2 Click [Preferences].
3 Select the [Paper/Quality] tab.
4 Select [Multi-Purpose Tray] from
[Paper Source].
5 Click [Advanced].
6 Click [Paper Size] and select a paper
size from the drop-down list.
7 Click [OK].
8 Start printing.
For Mac OS X PS Printer Driver
1
From the [File] menu, select [Print].
2 Select a paper size from [Paper Size].
3 Select [Paper Feed] from the panel
menu.
4 Select [All pages From] and then select
[Multi Purpose Tray].
5 Start printing.
Memo
If setting details are not displayed in the print dialog
box, click [Show Details] at the bottom of the
dialog box.
For Mac OS X PCL Printer Driver
1
From the [File] menu, select [Print].
2 Select a paper size from [Paper Size].
3 Select [Setup] from the panel menu.
4 Select [Multi Purpose Tray] from
[Paper Source].
5 Start printing.
Memo
If setting details are not displayed in the print dialog
box, click [Show Details] at the bottom of the
dialog box.
- 58 -
Printing in Custom Sizes
2
2. Printing Basic Operation
Printing in Custom Sizes
To load custom size paper, you need to register the width and length of the paper before printing. The
range of the sizes you can set differs according to the paper tray.
Tray Available size range
Tray1 Width:
105 to 297 mm (4.1 to 11.7 inches)
Length:
148, 182 to 431 mm
(5.8, 7.2 to 17.0 inches)
Tray 2/3/4
(Option)
Width:
148 to 297 mm (5.8 to 11.7 inches)
Length:
182 to 431 mm (7.2 to 17.0 inches)
MP tray Width:
64 to 297 mm (2.5 to 11.7 inches)
Length:
90 to 1321 mm (3.5 to 52 inches)
Note
[Custom] is displayed only when [Paper Size] is set to
[Custom].
The available size range for duplex printing is the same as
that for tray 2/3/4.
1 Press the scroll button or on the
operator panel.
2 Press the scroll button several times
to select [Menus] and press the
<ENTER> button.
3 Check that [Tray Conguration]
is selected and press the <ENTER>
button.
4 Press the scroll button several times
to select [Tray Cong] of the paper
tray in which you loaded paper and then
press the <ENTER> button.
5 Check that [Paper Size] is selected and
press the <ENTER> button.
6 Press the scroll button several times
to select [Custom] and then press the
<ENTER> button.
7 Press the <BACK> button.
- 59 -
Printing in Custom Sizes
2
2. Printing Basic Operation
8 Press the scroll button to select
[X Dimension] and then press the
<ENTER> button.
9 Enter the paper width value using
the ten-key pad and then press the
<ENTER> button.
10 Press the <BACK> button.
11 Press the scroll button to select
[Y Dimension] and then press the
<ENTER> button.
12 Enter the paper length value using
the ten-key pad and then press the
<ENTER> button.
13 Press the <ON LINE> button to exit the
menu mode.
14 Specify a custom in the following
procedures.
For Windows PCL Printer Driver
1
Click [Start] and select [Devices and
Printers].
2 Right-click the
Your
Printer
icon and
select the type of driver you want to
specify from [Printing preferences].
3 On the [Setup] tab, click [Paper Feed
Options].
4 Click [Custom Size].
5 Enter a name and the dimensions.
a Enter a name for the new size in the
[Name] box.
b Enter its dimensions in the [Width]
and [Length] boxes.
6 Click [Add] to save the custom paper
size to the list and then click [OK].
You can save up to 32 custom sizes.
7 Press [OK] until the [Printing
preferences] dialog box is closed.
8 Open the le you want to print.
9 Select the registered paper size and
start printing on the print dialog.
- 60 -
Printing in Custom Sizes
2
2. Printing Basic Operation
For Windows PS Printer Driver
1
Click [Start] and select [Devices and
Printers].
2 Right-click the
Your
Printer
icon and
select the type of driver you want to
specify from [Printing preferences].
3 On the [Layout] tab, click [Advanced].
4 Click [Paper Size] and select
[PostScript Custom Page Size] from
the drop-down list.
5 Enter the dimensions in the [Width] and
[Height] boxes, and press [OK].
Note
[Offsets Relative to Paper Feed Direction] is not
available.
6 Press [OK] until the [Printing
preferences] dialog box is closed.
7 Open the le you want to print from the
application.
8 Select [PostScript Custom Page Size]
for a paper size and start printing on the
printer driver.
For Mac OS X Printer Driver
Note
In the Mac OS X printer driver, paper size out of the
available range can be set, however, image is not correctly
printed. set paper size within available range.
1 Open the le you want to print.
2 From the [File] menu, select [Print].
3 Select [Manage Custom Sizes] from
[Paper Size]
4 Click [+] to add an item to the list of
custom paper sizes.
5 Double-click [Untitled] and enter a
name for the custom paper size.
6 Enter the dimensions in the [Width] and
[Height] boxes.
7 Click [OK].
8 Congure other settings if necessary and
then start printing.
Memo
If setting details are not displayed in the print dialog
box, click [Show Details] at the bottom of the
dialog box.
- 61 -
Printing in Custom Sizes
2
2. Printing Basic Operation
Open the le you want to print, and print
it in the following procedures.
For Windows PCL Printer Driver
1
From the [File] menu, select [Print].
2 Click [Preferences] or [Properties].
3 On the [Setup] tab, select a paper size
from [Size].
4 Select [Multipurpose Tray] from
[Source].
5 Start printing.
For Windows PS Printer Driver
1
From the [File] menu, select [Print].
2 Click [Preferences] or [Properties].
3 Select the [Paper/Quality] tab.
4 Select [Multipurpose Tray] from
[Paper Source].
5 Click [Advanced].
6 Click [Paper Size] and select a paper
size from the drop-down list.
7 Click [OK].
8 Start printing.
For Mac OS X PS Printer Driver
1
From the [File] menu, select [Page
Setup].
2 Select a paper size from [Paper Size]
and then click [OK].
3 From the [File] menu, select [Print].
4 Select [Paper Feed] from the panel
menu.
5 Select [All pages From] and then select
[Multi Purpose Tray].
6 Start printing.
For Mac OS X PCL Printer Driver
1
From the [File] menu, select [Page
Setup].
2 Select a paper size from [Paper Size]
and then click [OK].
3 From the [File] menu, select [Print].
4 Select [Setup] from the panel menu.
5 Select [Multi Purpose Tray] from
[Paper Source].
6 Start printing.
- 62 -
Paper Output
2
2. Printing Basic Operation
Paper Output
Your printer outputs to the output tray or rear output tray. Paper types that can be outputted to each
stacker are as follows.
Output
Stacker
Supported
paper type
Paper output
capacity
Output
Tray
Plain paper
Recycled
paper
200 sheets (when
paper weight is less
than 80 g/m
2
)
Rear
Output
Tray
Plain paper
Recycled
paper
Envelope
Index card
Label
100 sheets (when
paper weight is less
than 80 g/m
2
)
10 sheets (Ultra
Heavy paper and
envelopes)
Note
Do not open or close the rear output tray while printing as
it may result in a paper jam.
Using the Output Tray
Paper is delivered with the print side face down,
stacked in the order printed.
Note
Check that the rear output tray (1) on the rear side of the
printer is closed. If the rear output tray is open, paper is
always outputted to the rear output tray.
1
Memo
Open the paper supporter (2) so that the printed papers
do not fall down from the output tray.
2
Using the Rear Output Tray
Paper is delivered with the print side face up,
stacked opposite the order printed.
1 Pull the rear output tray (1) on the rear
side of the printer and open it outward.
1
2 Unfold the paper support (2).
2
3 Open the sub support (3).
3
- 63 -
Convenient Print Functions
2
2. Printing Basic Operation
Convenient Print Functions
The following convenient print functions are available. For details, refer to the User’s Manual
(Advanced).
Printing on Postcards, Reply
Postcards or Envelopes
Printing on Labels
Printing on Custom Size Paper
You can register customized paper sizes to the
printer driver so you can print on nonstandard
paper such as banners.
● Printing on custom size paper
A3
A4
Changing the Page Layout
You can change the page layout to multiple print,
booklet print and poster print etc.
12
1
3
5
7
9
11
12
34
●Multipie print ●Booklet print ●Poster print
Duplex Printing
You can print on both sides of a sheet of paper.
1
2
●Duplex prints
Scaling to Pages
You can print data formatted for one size page
onto a different size page without modifying the
print data.
Printing Color Data in
Monochrome
Changing Print Quality
(Resolution)
You can change the print quality to suit your
needs.
Saving Toner
You can save toner by reducing printing density. A
toner saving can be set in 3 levels.
When printing in 100 % black, you can also
select the setting without a toner saving. Amount
of toner can be saved without affecting any
readability for small characters.
●Saving toner
Memo
There are many convenient print functions in addition to
those above. Refer to the User’s Manual (Advanced).
- 64 -
Canceling Printing
2
2. Printing Basic Operation
Canceling Printing
Press the <CANCEL> button on the operator
panel to cancel print jobs being currently printed
or preparing for a print.
When you press the <CANCEL> button is
pressed, the following message appears.
To cancel printing, select [Yes] and then press
the <ENTER> button.
To proceed to printing, select [No]
and then
press the <ENTER> button.
If a printer is not operated for about 3 minutes
while this message appears, the message will go
out and printing proceeds.
- 69 -
Settings for Turning Power Off Automatically (Auto Power Off)
2
2. Printing Basic Operation
Settings for Turning Power Off Automatically
(Auto Power Off)
Note
In the factory default, a printer does not enter the auto power off mode while connecting to the network.
Setting the Auto Power Off
To enable the auto power off mode while
connecting to the network perform the following
procedure.
1 Press the scroll button or on the
operator panel.
2 Press the scroll button several times
to select [Admin Setup], and press the
<ENTER> button.
3 Enter the administrator password, using
the numeric (0-9) keys.
The factory default password is “999999”. Press
the <ENTER> button whenever inputting one
character.
4 Press the <ENTER> button.
5 Press the scroll button several times
to select [Power Setup], and press the
<ENTER> button.
6 Press the scroll button several times
to select [Auto Power Off], and press
the <ENTER> button.
7 Press the scroll button or to select
[Enable], and press the <ENTER>
button.
8 Press the <ON LINE> button to exit the
menu mode.
20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Oki C843dn wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Oki C843dn

Oki C843dn Bedienungsanleitung - Deutsch - 151 seiten

Oki C843dn Bedienungsanleitung - Holländisch - 148 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info