Bedienungsanleitung Oki ES4161 (Seite 14 von 182) (Englisch)

492990

Zoom out

Zoom in

Vorherige Seite

1/182

Nächste Seite

Useful Functions

-14-

Copying Different Size

Documents (Mixed Size)

When you use the ADF, you can copy multiple

documents having the same width but different

lengths at the same time onto their respective

paper sizes.

Note

 You can use this function only when the document is a

combination of letter and legal 13.5 or of letter and legal

14.

 When Enabling [Mixed Size], [Paper Feed] is set to

[Auto], a paper tray corresponding to a document is fed

and [Paper Feed] cannot be selected.

 [Mixed Size] is available only when [Zoom] is set to [Fit

to page(98%)] or [100%].

 You cannot set [Edge Erase] and [Mixed Size] at the

same time.

 Enable more than one paper tray by pressing the

<SETTING> key and then selecting [Paper Setup]>

[Select Tray]>[Copy] to use this function.

 When you use the MP tray, load paper in the MP tray first

and then enter the [Mixed Size] menu.

Memo

 You can use only standard paper for this function.

 In this section Tray1 and MP tray are used, and Legal 14 is

loaded in Tray1 and Letter is loaded in MP tray as an

example.

1 Load Legal 14 in Tray1 and Letter in MP

tray.

2 Press the <SETTING> key.

3 Press the to select [Paper Setup] and

then press .

4 Select [Legal 14] for [Paper Size] of

Tray1 and [Letter] for [Paper Size] of

MP tray.

5 Press until the top screen appears.

6 Press the <COPY> key.

7 Place your documents with mixing Letter

and Legal 14 sizes in the ADF.

8 Press the to enter the [Change

settings] menu.

9 Press the to select [Mixed Size] and

then press .

10 Press the to select [ON] and then

press .

11 Press the until the copy standby

screen appears.

12 Check that the following settings are

displayed on the start screen.

13 Enter the number of copies.

14 Press .

Note for Using Multiple

Functions

Functions That Cannot Be Used

Simultaneously

Some functions cannot be used in combination

with other functions. If you try to select

incompatible functions, a message indicating that

you cannot select the function appears.

For example, when you have specified [Margin],

you cannot specify [N-in-1] and [Repeat].

Of functions displayed in the message, disable

unnecessary functions and then try to set a

function you want to use again.

Memo

 Some functions cannot be used with others.

Disabling a Function

To disable one of the functions, return the

function's setting to the default.

1 Press the <COPY> key.

2 Press the to enter the [Change

settings] menu.

3 Press the to select the function you

want to disable and then press .

4 Press the to select the default value

and then press .

5 Press the until the copy standby

screen appears.

Memo

 When the default setting has been changed from the

factory default, select the default setting after changing

should be selected.

Reference

 For the default value of each function, refer to "View

Information" P. 81.

[Mixed Size]: ON

[Paper Feed]: Auto

[Zoom]: 100%

[Scan size]: Legal 14

MONO

When selecting [Margin]

you cannot specify [N-in-1]/

[Repeat].

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oki ES4161 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oki ES4161

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info