Bedienungsanleitung Oki ES4161 (Seite 113 von 203) (Englisch)

492990

113

Zoom out

Zoom in

Vorherige Seite

1/203

Nächste Seite

Scanning Methods

-113-

Scanning

7 Press the to select [Select An

Application] and then press .

8 Press the to select where to send the

scanned document and then press .

9 Press or .

Memo

 If you select [Application], the specified application starts

and the scanned image is displayed on the application.

 If you select [Folder], the scanned image is saved in the

specified folder.



If you select [

PC-FAX

], the application for fax transmission

starts. After sending the scanned image, send your fax with

the fax transmission software on your computer.

 WSD Scan connection

1 Press the <SCAN> key on the Operation

Panel.

2 Place the original on the automatic

document feeder or on the scanner glass.

3 Press the to select [Local PC] and

then press .

4 Check that the [Select A Connecting

PC] is selected, and press .

5 Press the to select [From WSD Scan]

and then press .

6 Press the to select the destination PC

and then press .

7 Press the to select [Duplex Scan]

and then press .

8 Press the or to select [ON] or

[OFF] and then press .

9 Press or .

Memo



To start the dual-sided scan, turn its setting On and place

the original on the automatic document feeder. If you turn

the dual-sided scan On but place the document on the

scanner glass, you cannot scan the dual sides of document.



When using the scanner application on PC, it will be

scanned by the scanner type of scan profile setup on PC,

regardless of where the document is set or the setting of

[

Duplex Scan

Scan to Remote PC

This will launch the Scanner driver from a utility

installed on the PC (ActKey, PaperPort, Image,

Adobe Photoshop CS3, etc.) and will begin scanning.

Connect the machine to a computer via USB or a

network.

TWAIN (USB connection and Network

connection) and WSD Scan are supported.

There are 3 Modes of Operation:

Simple Scan Mode, Manual Scan Mode, and

Secure Scan Mode.

In Simple Scan Mode, the scanning can be

started from all computers via USB, Network and

WSD Scan connection, without special operation

on the operator panel.

In Manual Scan Mode, the scanning can be

started from all computers via USB, Network and

WSD Scan connection.

In Secure Scan Mode, scanning can only be

performed by a machine among the already

registered computers in the network via USB,

Network and WSD Scan connection.

Only one computer can be connected at the

same time.

Memo

 For the following procedure, ActKey will be used as an

example for Windows, and Adobe Photoshop CS3 for Mac

OS X. The items in this manual may differ depending on

the application you are using.

Note

 Connect the machine to a computer via USB or a network.

 Install an application (ActKey, PaperPort, etc.) and a

scanner driver before starting a scan job. This installation

is NOT required for WSD Scan connection.

 If you connect the machine to network, follow these

instructions.

-Set [TCP/IP] setting to [Enable].

- Conform the IP version of the machine to that of your

computer.

- Set up the DNS server.

- Enable the network TWAIN setting.

 When in Secure Scan Mode, the administrator needs to

scans from the control panel or the web site beforehand.

 For Mac OS X, when carrying out a network scan for the

first time, you need to set the connection target when

using a driver. When you use the driver for the first time,

the connection target selection tool will launch.

You do not need to set the connection target after the first

time.

 To operate the MFP in the WSD Scan connection, set the

followings.

-Set the [TCP/IP] setting of the MFP to [Enable].

- Match the IP version between the MFP and the PC.

- Enable the WSD Scan.

- Install the MFP on the PC.

Reference



For details on how to install a scanner driver, refer to

"Installing Scanner Drivers (TWAIN/WIA/ICA Driver)" P. 104.

MONO

COLO

MONO

COLO

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oki ES4161 Seite 113

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oki ES4161

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info