Bedienungsanleitung Oki ES4161 (Seite 144 von 203) (Englisch)

492990

144

Zoom out

Zoom in

Vorherige Seite

1/203

Nächste Seite

Error Messages

-144-

Power OFF/ON

%ERRCODE%: Error %FATALSTRING1%

Blinks An error has occurred in the device.

Turn the machine off and then on again.

If the same error occurs, turn the machine off

and then on again. If the error is not resolved, or

the same error occurs again, contact your dealer.

Document Jam

Please open the scanner unit and the ADF

cover.

Please see Help for details.

Blinks A document jam has occurred.

Open the ADF cover, and then remove the

jammed paper.

Lamp Error. Please call service.

<%CODE%>

Please see Help for details.

Blinks Indicates that a lamp error has occurred.

This message is displayed because of the light

intensity of the lamp is weak.

Contact your dealer.

%TRAY% missing.

Please see Help for details.

Lights up A paper cassette is not in the indicated tray.

Insert the paper cassette into the indicated tray.

If the cassette is already inserted in the machine,

pull out the cassette and set it again to correctly

locate it.

430

440

Please close %TRAY%.: 430,440

To cancel, select [Cancel]

Blinks A paper cassette is not in the indicated tray.

Insert the paper cassette into the indicated tray.

If the cassette is already inserted in the machine,

pull out the cassette and set it again to correctly

locate it.

Inspection is required.

%ERRCODE%: SIP Error

Blinks Processing of scanned image has failed.

Turn the machine off and then on again.

If the error is not resolved, contact your dealer.

Please call service.

Scanner unit failed to detect printer unit.

Blinks An error has occurred between the scanner and

printer units.

Turn the machine off and then on again.

If the error is not resolved, contact your dealer.

SIP Firmware Missing Blinks A board failure has been detected.

Turn the machine off and then on again.

If the error is not resolved, contact your dealer.

Wait a moment.

Network initializing ...

Lights up Changed network settings are being stored.

085 Please change SD Memory Card.

Error Code: 085

Lights up The contents of the SD memory card cannot be

read normally.

If the same card is used further, the same error

may occur. Replace the SD memory card.

Power OFF/ON

Carriage Error <1>

Please see Help for details.

Blinks Indicates that a carriage error has ocurred.

This message is displayed because of the

scanner carriage is not working normally.

If the error is not resolved, contact your dealer.

Power OFF/ON

Carriage Error <%CODE%>

Blinks Indicates that the following carriage error has

occurred.

2 : Home position error (carriage connection

error)

3 : Scanning start position detection error

If the error is not resolved, contact your dealer.

581 Please close faceup stacker.

581:Cannot print with duplex.

Blinks Although Duplex printing was attempted, the

FaceUp stacker is open and Duplex printing is

disabled.

500 Please install paper on

Manual Feeder. Please set paper

(%MEDIA_SIZE%).

To cancel, select [Cancel]

Blinks Manual paper feed is required. Manually insert

the paper shown by %MEDIA_SIZE%.

Error

code

Message

key

Cause/Remedy

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oki ES4161 Seite 144

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oki ES4161

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info