492997
58
Zoom out
Zoom in
Vorherige Seite
1/94
Nächste Seite
Menu functions > 58
OP MENU
(cont.)
FX EMULATION ENABLE
DISABLE
Set up ENABLE/DISABLE condition for FX
EMULATION category.
If DISABLE is selected, FX EMULATION
category of USERS MENU will not appear.
USB MENU ENABLE
DISABLE
Set up ENABLE/DISABLE condition for USB
MENU category.
If DISABLE is selected, USB MENU category
of USERS MENU will not appear.
NETWORK MENU ENABLE
DISABLE
Set up ENABLE/DISABLE condition for
NETWORK MENU category.
If DISABLE is selected, NETWORK MENU
category of USERS MENU will not appear.
MEMORY MENU ENABLE
DISABLE
Set up ENABLE/DISABLE condition for
MEMORY MENU category.
If DISABLE is selected, MEMORY MENU
category of USERS MENU will not appear.
SYS ADJUST
MENU
ENABLE
DISABLE
Set up ENABLE/DISABLE condition for
SYS.ADJUST MENU category.
If DISABLE is selected, SYS.ADJUST MENU
category of USERS MENU will not appear.
MAINTENCE
MENU
ENABLE
DISABLE
Set up ENABLE/DISABLE condition for
MAINTENACE MENU category.
If DISABLE is selected, MAINTENANCE MENU
category of USERS MENU will not appear.
USAGE MENU ENABLE
DISABLE
Set up ENABLE/DISABLE condition for
USAGE MENU category.
If DISABLE is selected, USAGE MENU
category of USERS MENU will not appear.
CONFIG. MENU NEARLIFE
STATUS
ENABLE
DISABLE
Set LCD panel control at the time of near-life
warning for drum, fuser and belt.
Enable: Display a near-life warning.
Disable: Do not display a near-life warning.
LIFE WARNING ENABLE
DISABLE
If DISABLE is selected, the printer does not
display life warning after cover opening and
closing.
Display Condition: NEARLIFE STATUS is set
to DISABLE.
NEARLIFE LED ENABLE
DISABLE
Enables/disables illumination of front panel
LED when “near-end-of-life” warning of a
toner, drum, fuser, or belt occurs.
Attention LED is lit when setting is enabled,
inhibited when disabled.
ECO MODE ON
OFF
When ON, if the machine is in power save
mode and you send a small print job (1 or 2
pages), the machine will print the job
without warming the fuser to the “normal”
operating temperature beforehand.
When you change the setting and exit the
Admin Menu, the machine will power cycle
then the following message is displayed
“PLEASE POWER OFF/ON”. Switch the power
off then turn the machine back on.
ITEM SETTINGS EXPLANATION
58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Oki ES5431 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Oki ES5431

Oki ES5431 Bedienungsanleitung - Deutsch - 104 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info