Bedienungsanleitung Oki ES7170 (Seite 86 von 94) (Englisch)

665635

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

BASIC OPERATION

- 86 -

If the screen below appears, place another

original on the document glass and press

[SCAN] or the [START] button to continue

scanning. To finish the job, press [JOB

FINISH], followed by the [RESET] button.

• The above screen is not displayed under the following

conditions:

- You scan the original from the Reversing

Automatic Document Feeder without pressing

[CONTINUE] to scan additional originals.

- A scan preview is displayed.

• To cancel the operation, press [JOB CANCEL].

• To change the scan settings, press [SCAN SETTING].

 Advanced Guide

Note

• When the equipment has scanned more than 1000

pages in a job, the “The number of originals exceeds

the limits. Will you save stored originals?” message

appears. If you want to save the scans, press [YES].

• When the temporary workspace is full on the

equipment’s hard disk, a message appears and the job

is canceled. The available workspace can be viewed

on the TopAccess [Device] tab.

• If the number of jobs waiting to store scans in the

equipment's hard disk exceeds 20, a message appears

to indicate that the equipment’s memory is full. In this

case, wait a while until memory becomes available

again or delete unnecessary jobs from [JOB STATUS].

 P.88 "Viewing the scan job status"

Web Service (WS) Scan

Web Service (WS) Scan uses the functions of Windows

operating systems such as Windows Vista to scan images from

a client computer through the network. Scanning can be

performed through the touch panel operation or from a client

computer running Windows operating systems such as

Windows Vista. The images scanned on the equipment can be

loaded to your client computer and viewed on an application

supporting the Windows Imaging Acquisition (WIA) Scan

Driver.

System Requirements

The WS Scan function is available under the following

environments:

•OS

Windows Vista / Windows 7 / Windows 8 / Windows Server

2008 / Windows Server 2012

•Software

Windows Imaging Acquisition (WIA)-compliant applications

Scan Driver Installation

WS Scan uses the WIA Scan Driver included with Windows

operating systems such as Windows Vista. The WIA Scan

Driver is automatically installed to your client computer when

you install client software for Web Service Printing.

Note

• To install the WIA Scan Driver on a client computer, the Web

Service Scan setting must be enabled by the administrator

on TopAccess. For details, refer to the TopAccess Guide.

Memo

• The User Documentation DVD includes the WIA Driver for

users of Windows XP/Windows Vista/Windows 7/Windows

8/Windows Server 2003/Windows Server 2008/Windows

Server 2012. This driver can be used together with a WIA-

compliant application, such as Microsoft Paint supported by

Windows XP or Windows Vista, to scan images on the

equipment and load them to your client computer.

This guide provides instructions for using the touch panel to

scan images on the equipment. For operational instructions on

the client computers, refer to the documentation that comes

with your WIA-compliant application.

Scanning with Web Service Scan

Place the original(s).

On the control panel, press the [SCAN]

button to enter the SCAN menu.

Press [WS SCAN].

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oki ES7170 Seite 86

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info