665241
50
Zoom out
Zoom in
Vorherige Seite
1/141
Nächste Seite
- 50 -
Turning ON/OFF the Power
AppendixPrinting
3
Setting Up
2
Before use
1
Basic Device Operations
4
Index
Turning ON/OFF the Power
Power Supply Precautions
WARNING
There is a risk of getting
an electric shock and/or
causing fire.
Be sure to cut off the power supply when
attaching or removing the power supply plug
or the earth wire.
Be sure to connect an earth wire to the
grounding terminal of exclusive use.
Please do not connect with the ground of a
water pipe, a gas pipe, and a telephone wire,
or lightning rod without fail.
Make sure to connect with the ground terminal
before connecting the power cord to the
power supply plug.
Be sure to perform extraction and insertion of
the power cord with a power supply plug.
Insert the power supply plug into the wall
socket securely.
Do not touch the power cord, or machine, if
your hands are wet.
Install the power cord in a location where it will
not be stepped on, and do not place objects on
the power cord.
Do not twist, bind, or knot the power cord.
Please do not use a damaged power cord.
Do not carry out foot wiring.
Do not connect this machine and other electric
products to the same wall socket. If connected
simultaneously with an air-conditioner, a copy
machine, shredder, etc., electric noise may
interfere with operation. When the connection
with the same wall socket is unavoidable,
please use a commercial noise lter or a
commercial noise cut transformer.
Use the attached power cord and insert it
directory with the ground terminal. Do not use
power cords intended for other products with
this machine.
Do not use an extension cord. When use is
unavoidable, use a cord rated higher than 15A.
Use of an extended cord may cause AC
voltage decrease and interfere with normal
operation.
During printing, do not shut off the power
supply or pull out the power supply plug.
When not in use for consecutive holidays or
longterm travel, pull out the power cord.
Do not use the attached power cord for other
products.
Power Supply Conditions
Observe the following power supply conditions.
Current: 110 - 127VAC
(Range 99 - 140 VAC)
220 - 240VAC
(Range 198 - 264VAC)
Power
frequency:
50/60 Hz ± 2%
Note
If the power supply is unstable, use a voltage regulator.
The maximum power consumption of the device is 1500W.
Check that there is sufcient voltage capacity.
Operations cannot be assured if using an uninterruptible
power supply (UPS) or inverter. Do not use an
uninterruptible power supply or inverter.
50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Oki ES9541 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Oki ES9541

Oki ES9541 Zusatzinformation - Deutsch - 336 seiten

Oki ES9541 Bedienungsanleitung - Deutsch - 141 seiten

Oki ES9541 Zusatzinformation - Englisch - 334 seiten

Oki ES9541 Zusatzinformation - Holländisch - 105 seiten

Oki ES9541 Bedienungsanleitung - Holländisch - 141 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info