Bedienungsanleitung Oki MB260 (Seite 20 von 55) (Englisch)

492982

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

MB260

- 16 -

2 - Installation

Starting your device

Device connection

1 Make sure that the On/Off switch is on Off

(O position).

2 Connect the power cord to the device.

Plug the power cord to outlet on the wall.

3 Press the On/Off button to turn on the device

(I position).

Device initial setup

After a few seconds, when the machine has warmed up,

the Easy Install function is launched and the LCD screen

displays the following message:

The Easy Install function will help you configure your

machine by guiding you through the basic settings.

If you wish to modify the setting displayed, press the OK

button. If you do not want to modify the displayed setting,

press the C button: the Easy Install function then

displays the next basic setting.

1 Select the desired language using the  or 

buttons and confirm with OK.

The setup is now complete and the functions list is

automatically printed out.

The LCD screen displays the message P

APER EMPTY if no

paper has been loaded in the paper tray (see Loading

paper in the main unit tray, page 10). Once paper has

been loaded, printing will resume.

Paper insertion in the manual input

tray

The manual input tray allows you to use various paper

formats with greater grammage than the one used in the

paper feed cassette (refer to the paragraph

Specifications, page 47).

Only one sheet or envelope can be fed at a time.

1 Spread the manual feed guides to the maximum.

2 Insert a sheet or an envelope in the manual input

tray.

3 Adjust the paper guides against the right and left

edges of the sheet or the envelope.

4 Print making sure that the chosen paper format

corresponds to the selected format on the printer

(refer to Copy, page 18).

Use of envelopes

• Feeding can be done only through the manual feed.

• Recommended area should be the area which

excludes 15 mm from the leading edge, 10 mm from

both the left and right edges, and the rear edge.

• A few lines may be given in solid print at the part of

being overlapped.

• Envelopes which are not recommended may lead to

improper printing (refer to the paragraph

Specifications, page 47).

• Curled envelope after printing should be fixed

manually.

• Small crumples on the edge of the wide side of

envelopes, smearing, or less clear printing may

WARNING

Before plugging the power cord, it

is imperative to refer to the Safety

booklet.

WARNING

The power cord is used as a power

unit cut off. As a precaution, the

outlet shall be located close to the

device and be of easy access in

case of danger.

1 - FRANCAIS

2 - ENGLISH

Note

If you do not want to carry out the

initial setup, press the button. A

confirmation message appears. Press

the button again to confirm.

To manually modify and customise the

machine settings, refer to

Parameters/Setup, page 22.

Important

Before inserting paper, refer to the

paragraph Paper

recommendations, page 10.

Important

You can use paper weighing

between 52 and 160 g/m².

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oki MB260 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oki MB260

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info