Bedienungsanleitung Oki MB260 (Seite 30 von 55) (Englisch)

492982

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

MB260

- 26 -

6 - Network features

Connect your WLAN adaptor

Your machine belongs to a new generation of terminals

that you can incorporate into a WLAN network using a

WLAN USB key.

1 Plug your WLAN USB key into the USB port of your

machine.

Configure your network

Creating or rejoining a network

Before attempting to use a WLAN adaptor on your

machine, you must enter the parameters that will allow a

WLAN network to recognise your machine.

On your machine you will find simple instructions

that guide you step by step through the set-up of your

network. Just follow them!

 281 - SETUP / WLAN / SETUP WIZARD

1 Type in , select the menu SETUP using the keys

 or  and confirm with OK.

2 Select WLAN using the keys  or  and confirm

with OK.

3 Select SETUP WIZARD using the keys  or 

and confirm with OK.

The machine searches for existing networks.

4 Select your existing network, or select NEW

NETWORK to create it, using the keys  or  and

confirm with OK.

5 SSID appears on the screen, enter the name of

your network using the numerical keypad, pressing

the keys one after the other until you obtain the

name you want (32 characters maximum) and

confirm with OK.

6 AD-HOC MODE or INFRA. MODE appear on the

screen. Go back to the beginning of the chapter

and make your choice.

Select one of these modes and confirm with OK.

- If you choose AD-HOC mode, the sub-menu

CHANNEL appears, enter a figure between 1

and 13 (1 to 11 for the US) and confirm with OK.

7 Select your encryption method, OFF, WEP or

WPA, and confirm with OK:

- If you choose WEP, enter the WEP key that you

are using on your network.

- If you choose WPA, enter the WPA or WPA2

key that you are using on your network.

Note

You can be sure of perfect

communication if you use an

approved adaptor in conjunction with

your PC.

All of the latest printer drivers for the

approved adaptor may be found on

our website together with further

information:

http://www.okiprintingsolutions.com.

Important

Your machine’s network radio

adaptor transmits data using the

radio protocol IEEE 802.11g; it can

also be incorporated into an existing

IEEE 802.11b network.

When connecting to your machine,

only use the approved adaptor.

Other transmitting or receiving

adaptors may damage your device.

Irrespective of whether you use your

machine in an infrastructure or ad-

hoc network, you must set up certain

network and security parameters

(for example, the Service-Set-ID

(SSID) and the encryption key).

These must match the network’s

specifications.

Note

We recommend that the settings of

your WLAN network should only be

changed by a person with a good

knowledge of the configuration of your

computer.

Note

If you choose an existing network,

steps 5 and 6 (and possibly 7) are

carried out automatically.

Important

Please note that in ad-hoc mode,

the WPA/WPA2 encryption method

is not available.

Note

The WEP key number may be

configured in the menu:  29 -

SETUP / TECHNICALS / WEP KEYS

NBR.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oki MB260 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oki MB260

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info