Bedienungsanleitung Oki MB290 MFP (Seite 12 von 95) (Englisch)

492933

Zoom out

Zoom in

Vorherige Seite

1/95

Nächste Seite

MB290

- 12 -

Installation

- When you disconnect the power plug from the wall outlet, always pull the plug (not the cable).

- Do not allow paper clips, staples, or other small metallic objects to fall inside the product.

- Keep toner (used or unused), toner cartridge (or bottle), ink (used or unused) or ink cartridge out of reach of

children.

- Be careful not to cut yourself on any sharp edges when you reach inside the product to remove misfed sheets of

paper or masters.

- For environmental reasons, do not dispose of the product or expended supply wastes at household waste

collection point. Disposal can take place at our authorised dealer or at appropriate collection sites.

- Our products are engineered to meet the high standards of quality and functionality, and we recommend that you

only use the expendable supplies available at an authorised dealer.

Power Supply

The socket-outlet shall be installed near the product and shall be easily accessible.

For Fax or Telephone

- Do not use this product near water, for example near bath tub, wash bowl, kitchen sink or laundry tub, in a wet

basement or near a swimming pool.

- Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of an

electric shock from lightning.

- Do not use a telephone in the vicinity of a gas leak to report the leak.

Paper recommendations

Loading paper in the main unit tray

• Insert paper with the face down, and adjust paper guides to the paper format to avoid feed failure, skewing, and

paper jams.

• Amount of loaded paper must not exceed the loading mark. If the loading mark is exceeded, this may cause feed

failure, skewing, and paper jams.

• Adding paper in the pile must be avoided because it may cause double feeding.

• When withdrawing the cassette from the main unit, always support it with both hands to avoid dropping it.

• If you use paper already printed by your machine or another printer, the printing quality may not be optimal.

Handling of paper

• Curling must be corrected before printing.

• Curls must not exceed 10 mm.

• Care must be taken with storage to prevent feed faults and image defects due to leaving the paper in conditions of

high humidity.

Humidity control

• Paper which has become damp, or paper which has been left unused for a very long time, must not be used.

• After opening the paper, it must be kept in a plastic bag.

• Paper with waved ends, paper which is creased, paper with crumples, and any other non-normal paper must not

be used.

Handling the unit

Operator shocks

During printing, shocks must not be applied to the paper feed cassette, tray, cover, and other parts of the machine.

Moving the unit

When moving the unit on a desk, it must be lifted, and not dragged.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oki MB290 MFP Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info