Bedienungsanleitung Oki MB290 (Seite 7 von 100) (Englisch)

492984

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

MB290

- 1 -

1 - Preface - Environmental Information - Software use license

Preface

Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. Oki

assumes no responsibility for the results of errors beyond its control. Oki also cannot guarantee that changes in

software and equipment made by other manufacturers and referred to in this guide will not affect the applicability of the

information in it. Mention of software products manufactured by other companies does not necessarily constitute

endorsement by Oki.

While all reasonable efforts have been made to make this document as accurate and helpful as possible, we make no

warranty of any kind, expressed or implied, as to the accuracy or completeness of the information contained herein.

The most up-to-date drivers and manuals are available from the Oki web site:

http://www.okiprintingsolutions.com

Oki and Microline are registered trademarks of Oki Electric Industry Company, Ltd.

Microsoft, MS-DOS and Windows are registered trademarks of Microsoft Corporation.

Other product names and brand names are registered trademarks or trademarks of their proprietors.

Laser Safety Information

CAUTION: Use of controls, adjustments, or performance of procedures other than those specified in this guide

may result in hazardous light exposure.

This equipment complies with international safety standards and is classified as a Class 1 Laser Product.

With specific reference to lasers, the equipment complies with laser product performance standards set by

governmental, national, and international agencies as a Class 1 Laser Product. It does not emit hazardous light,

as the beam is totally enclosed during all phases of customer operation and maintenance.

For Europe/Asia

This machine complies with IEC 60825-1:1993+A1:1997+A2:2001 standard, is classified as laser class 1 product

and is safe for office/EDP use. It contains one class 3B laser diode, 10.72 mW max, 770-795 nm and other class

1 LEDs (280 µW at 639 nm).

Direct (or indirect reflected ) eye contact with the laser beam might cause serious eye damage. Safety precautions

and interlock mechanisms have been designed to prevent any possible laser beam exposure to the operator.

For North America

CDRH Regulations.

This equipment complies with the FDA performance standards for laser products except for deviations pursuant

to Laser Notice No.50, dated 24 June 2007 and contains 1 class 3B laser diode, 10.72 milliwatt, 770-795

nanometer wavelength and other class 1 LEDs (280 µW at 639 nm).

This equipment does not emit hazardous light, since the beam is totally enclosed during all customer modes of

operation and maintenance.

Repairs/maintenance: Repairs and maintenance should only be carried out by a

qualified technician. There are no user serviceable parts inside the machine. To

reduce the risk of electrical shock, you must not carry out these operations yourself.

Opening or removing the covers exposes you to two hazards:

- The laser beam can cause irreversible eye damage.

- Contact with electrical components can lead to electrical shock.

For installation conditions and safety precautions, refer to the separate Safety/

Installation Instructions booklet provided.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oki MB290 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oki MB290

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info