Bedienungsanleitung Oki MB290 (Seite 14 von 100) (Englisch)

492984

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

MB290

- 9 -

2 - Installation

- Never try to modify the machine. This could cause a fire hazard or an electric shock hazard.

- Always make sure that paper clips, staples or other small metallic items do not get inside the machine via the

ventilation ports or other ports. Such items create fire hazards or electric shock hazards.

- Prevent water and any other liquid from spilling on the machine or near to it. Any contact of the machine with water

or liquid can cause a fire hazard or an electric shock hazard.

- If liquid or metallic item gets accidentally inside the machine, turn it off immediately, unplug the power cord and

contact your retailer. Otherwise, you will face a fire hazard or an electric shock hazard.

- In case of heat, smoke, unusual smell or abnormal noise emissions, turn the machine off, unplug the power cord

immediately and contact your retailer. Otherwise, you will face a fire hazard or an electric shock hazard.

- Avoid using the machine during an "electric storm", this can cause an electric shock hazard due to lightning.

- Never move the terminal during printing.

- Always lift the terminal when you wish to move it.

Safety information

When using your product, the following safety precautions should always be followed.

Safety During Operation

In this information slip, the following symbols are used:

WARNING

- Connect the power cord directly into a wall outlet and never use an extension cord.

- Disconnect the power plug (by pulling the plug, not the cable) if the power cable or plug becomes frayed or

otherwise damaged.

- To avoid hazardous electric shock or laser radiation exposure, do not remove any covers or screws other than

those specified in the Operating instructions.

- Turn off the power and disconnect the power plug (by pulling the plug, not the cable) if any of the following

conditions exists:

• You spill something into the product.

• You suspect that your product needs service or repair.

• Your product’s cover has been damaged.

- Do not incinerate spilled toner or used toner. Toner dust might ignite when exposed to an open flame.

- Disposal can take place at our authorised dealer or at appropriate collection sites.

- Dispose of the used toner cartridge (or bottle) in accordance with the local regulation.

CAUTION

- Protect the product from dampness or wet weather, such as rain, snow, and so on.

- Unplug the power cord from the wall outlet before you move the product. While moving the product, you should

take care that the power cord will not be damaged under the product.

Make sure to place the machine in well ventilated premises. When in operation, the printer generates

a small amount of ozone. An unpleasant smell can come from the printer if it is used intensively in

poorly ventilated premises. For a secure use, make sure you place the machine in well ventilated

premises.

WARNING:

Indicates a potentially hazardous situation which, if instructions are not followed, could

result in death or serious injury.

CAUTION:

Indicates a potentially hazardous situation which, if instructions are not followed, may result in

minor or moderate injury or damage to property.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oki MB290 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oki MB290

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info