Bedienungsanleitung Oki MB290 (Seite 28 von 100) (Englisch)

492984

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

MB290

- 23 -

4 - Fax

Fax

This chapter describes all the fax processing and

configuration functions.

You will also find a section describing fax mailboxes.

Fax transmission

Print a header page

A header page is stored in your terminal. To send your fax

using this header page, you can print it at any time and fill

in your details.

1 Select



30 - FAX /HEADER PAGE.

2 Select:

301 - LOCAL, to print a header page according to

the language configured on the terminal,

302 - INTERNAT, to print a bilingual header page,

the language of the country configured on the

terminal and English. The separator between the

two languages is "/".

Example of the international header page:

Immediate transmission

1 Place the document to be copied in the automatic

document feeder, face printed on the top.

Place the document to be copied face down on the

glass, respecting the indications around the glass.

2 Enter the fax number then press or .

3 If you are using the flatbed scanner, you can scan

more than one page. Place the next page on the

scanner, select NEXT and confirm with OK. Select

DONE when all pages have been scanned.

The icon flashes during the call phase, it stays lit

when both faxes are in communication.

At the end of transmission the initial screen is displayed.

Delayed transmission

This function allows you to transmit a document at a later

time.

To program a postponed transmission you need to

identify the subscriber number, transmission time, feeder

type and number of pages.

To delay the transmission time of your document :

1 Place the document to be copied in the automatic

document feeder, face printed on the top.

Place the document to be copied face down on the

glass, respecting the indications around the glass.

2 Select



31 - FAX / TRANSMISSION.

3 Enter the subscriber number you wish to program

at a different time or choose your dialling mode and

confirm with OK.

4 Next to the current time, enter the new time and

confirm with OK.

5 Select IMAGE or PDF and confirm with OK.

6 Select B&W SCAN or COLOUR SCAN and

confirm with OK.

7 Adjust the contrast and confirm with OK.

8 Select the feed type, FEEDER or MEMORY and

confirm with OK.

9 You may enter the number of pages before

transmission and confirm with OK.

10 Confirm postponed transmission by pressing .

11 If you are using the flatbed scanner, you can scan

more than one page. Place the next page on the

scanner, select NEXT and confirm with OK. Select

DONE when all pages have been scanned.

Your document is stored and will be sent at the new time.

Note

If English is the language configured

on the terminal, the header page will

only be printed in English.

Note

You can modify transmission options

when sending a fax. To do so, press

OK after entering the fax number.

Important

Make sure that the document in the

feeder tray or on the scanner window

is properly located in order to avoid

sending blank or incorrect pages.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oki MB290 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oki MB290

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info