Bedienungsanleitung Oki MB290 (Seite 58 von 100) (Englisch)

492984

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

MB290

- 53 -

9 - Network features

Setting up the PC

For this section, refer to the instructions supplied by the

manufacturer of the WLAN USB key to help you to find

and join the "house" network.

1 You may need to install the software for the WLAN

USB key on the PC, if this has not already been

done.

2 Plug WLAN USB key into a USB port on the PC.

3 Use the software of the WLAN USB key to detect

the network.

4 Join the network "house" once this has been

detected.

5 Now set up the WLAN network connection of your

PC.

To do this, you must configure the element

Protocol Internet (TCP/IP) for the WLAN

connection that has been created. If this element is

set up in such a way as to obtain an IP address

automatically, you must change it to manual mode

to set up the TCP/IP address ("169.254.0.1" in our

example), the subnet mask ("255.255.0.0" in our

example) and the default gateway ("0.0.0.0" in our

example).

6 Enter OK.

SNMP service configuration

A Simple Network Management Protocol (SNMP) agent is

available on the multifunction machine for network

administrators who want to monitor and manage the

device via the local network using their SNMP network

service.

SNMP agent configuration

To configure the parameters of the SNMP agent on the

multifunction machine:

1 Open a Web browser using a PC that is registered

on the network.

2 Enter the IP address of the machine in the Address

field and confirm by pressing Enter.

3 When the homepage opens, select the interface

language.

4 In N

ETWORKS

, select SNMP.

5 In C

OMMUNITY

, enter the required write and read

shared community name that allows

communications between SNMP agents

(multifunction machine) and SNMP management

stations (PC with console).

6 In T

RAP

, select the information and events to

collect.

7 In T

RAP

ECIPIENT

, enter the IP address of the PC

where the SNMP browser is installed.

8 Confirm your modifications.

SNMP browser configuration

The multifunction machine comes with the following

embedded Management Information Base (MIBs):

• Common Printer

• Host Printer

• Printer Port Monitor

The following traps (collectable information) are available:

•Date

• Memory status (type, used and max. size)

• Devices type (keyboard, scanner, etc.)

• General status

• Default language

• Available languages

• Printer type (internal/external)

• LCD specification (line and character number)

• Serial number

• Covers type

• Paper tray (output, input, paper format, capacity)

• Resolution (600 dpi)

• Margin size

• PDL interpreter (type, version)

• Alerts (paper jam, cover, etc.)

Note

To guide you through this stage, refer

to the paragraph “Setting the

parameters for a connection” in the

manufacturer’s instructions.

Note

Compatible with standard SNMPv1

and SNMPv2 IP networks.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Oki MB290 Seite 58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Oki MB290

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info